[Automatic]: Configures an IP address automatically with DHCP/Auto IP.
[Manual]: Configure an IP address and subnet mask manually.
Display192.168.0.1
Subnet Mask255.255.255.0
Wi-FiThis is used to connect the video display to a network using Wi-Fi and control it from an external
control device. (
43)
ControlInfrastructure
Access Point
Off
Sets the Wi-Fi connection method.
[Infrastructure]: This method connects to Wi-Fi via an access point.
[Access Point]: This device acts as an access point, and this method
connects the device directly to the Wi-Fi device.
InfrastructureSets the access point to connect to. At factory settings, the access point
to connect to is not configured.
PasswordYou may specify a password if needed by using up to 24 alpha-numerical
characters and symbols. The default password is blank.
Access PointConfigures the access point.
SSIDEnter the SSID. This can be set using up to 24 alpha-numerical characters
and symbols.
Frequency2.4 GHz, 5.0 GHzSets the communication mode.
Channel
When [2.4 GHz]
1 to 13 (increments of 1)
When [5.0 GHz]
36, 40, 44, 48
Sets the channel to use for communication.
PasswordEnter the password. This is set using between 8 and 24 alpha-numerical
characters and symbols.
Remember to change the default password. The default password is the
serial number. The serial number is the individual 12-digit number assigned
to your product, and can be checked on the [System Information] screen.
WebSettings for operating this device remotely using a Web browser. (
45)
ControlOn, OffSet whether or not to receive control signals from an external device,
connected using network connection or Wi-Fi connection, in order to
operate the video display remotely from the device's web browser.
User IDEnter the user ID. This is set using up to 16 alpha-numerical characters
and symbols. The default user ID is [user].
PasswordEnter the password. This is set using between 8 and 16 alpha-numerical
characters and symbols. The default password is the serial number. The
serial number is the individual 12-digit number assigned to your product,
and can be checked on the [System Information] screen.
View the manual for the Canon DP-V1711 here, for free. This manual comes under the category monitors and has been rated by 1 people with an average of a 7.2. This manual is available in the following languages: English. Do you have a question about the Canon DP-V1711 or do you need help? Ask your question here
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Canon DP-V1711 below.
What screen dimensions does my monitor have?
The size of your monitor is usually expressed in inches, 1 inch is 2.54 centimetres. The size is the diagonal size of your monitor, so you measure the screen from bottom left to top right.
What is HDMI?
HDMI stands for High-Definition Multimedia Interface. An HDMI cable is used to transport audio and video signals between devices.
Is the manual of the Canon DP-V1711 available in English?
Yes, the manual of the Canon DP-V1711 is available in English .
Need help?
Do you have a question about the Canon and is the answer not in the manual?
Question and answer
Number of questions: 0