Canon CONSOLE Image Control & Storage Software v1.1 manual

Canon CONSOLE Image Control & Storage Software v1.1
8.2 · 1
PDF manual
 · 62 pages
English
manualCanon CONSOLE Image Control & Storage Software v1.1

Preparation (Installation, Connection, Launch, Activation)

1-8

Connecting the Camcorder

Connecting the Camcorder to the Computer
1
Turn the camcorder’s power on and activate the DV CONTROL
function.
2
Set the camcorder’s recording program to EXT.CONT. or Camera
mode.
When the camcorder is set to EXT.CONT. mode, only the following functions of the
camcorder can be used.
- Camcorder’s start/stop button
- Handle and grip zoom lever
- ZOOM SPEED switch and dial
- EJECT switch
- All audio related adjustments except for AUDIO MONITOR button
3
Connect the camcorder to the computer using the IEEE1394 (DV)
cable.
You do not need to turn off the computer.
Do not deactivate the DV CONTROL function while the camcorder is connected to the
computer.
Refer to the computer manual for the location of the computer’s IEEE1394 (DV) port.
HDV/DV terminal
on the camcorder
DV cable
IEEE1394 port
on the computer
Follow the procedure below to confirm if the camcorder is properly connected. Your
camcorder is correctly connected if you see items described in step 4 in the [Device
Manager] window.
1) Set the camcorder to EXT.CONT. and connect to the computer.
2) Open the [Device Manager] window. ( 7-56)
3) Select [Devices by connection] from the [View] menu.
4) Confirm that the following names are shown under IEEE1394 controller.
• When connecting to a computer in HD mode:
[AV/C Tape Device], [Canon Camera Storage Device] and [Canon Virtual VCR] are
shown.
• When connecting to a computer in SD mode:
[Canon DV camcorder], [Canon Camera Storage Device] and [Canon Virtual VCR] are
shown.

Manual

View the manual for the Canon CONSOLE Image Control & Storage Software v1.1 here, for free. This manual comes under the category camcorders and has been rated by 1 people with an average of a 8.2. This manual is available in the following languages: English. Do you have a question about the Canon CONSOLE Image Control & Storage Software v1.1 or do you need help? Ask your question here

Index

Need help?

Do you have a question about the Canon and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Canon CONSOLE Image Control & Storage Software v1.1 specifications

Below you will find the product specifications and the manual specifications of the Canon CONSOLE Image Control & Storage Software v1.1.

General
BrandCanon
ModelCONSOLE Image Control & Storage Software v1.1
Productcamcorder
LanguageEnglish
FiletypeUser manual (PDF)

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Canon CONSOLE Image Control & Storage Software v1.1 below.

What is a megapixel?

The number of megapixels denotes how many pixels there are in the sensor. 1 megapixel equals 1 million pixels. The more pixels, the higher the potential image quality.

What does the abbreviation 'MP' stand for?

MP stands for MegaPixels.

Is the manual of the Canon CONSOLE Image Control & Storage Software v1.1 available in English?

Yes, the manual of the Canon CONSOLE Image Control & Storage Software v1.1 is available in English .

Is your question not listed? Ask your question here

No results