Canon CONSOLE Image Control & Storage Software v1.1 manual

Canon CONSOLE Image Control & Storage Software v1.1
8.2 · 1
PDF manual
 · 62 pages
English
manualCanon CONSOLE Image Control & Storage Software v1.1

Playback the Recorded Files

Various Settings and [Performance Check] Camera and Picture Control Recording onto the Hard Disk Playback the Recorded FilesCONSOLE Windows
6-51

Output to the Camcorder

By connecting the camcorder to the monitor, you can output the recorded pictures from the computer
to the monitor.
To output the playback pictures to the camcorder, you need to set the camcorder’s
recording program to EXT.CONT.
When using XL H1:
If you select the HD mode, only video in HDV standard video is displayed on the monitor; if
you select the SD mode, only video in DV standard video is displayed on the monitor.
When using XL2:
Only video in DV standard is displayed on the monitor.
When the camcorder is set to HD mode and the [HD DOWN-CONV] menu under [SIGNAL
SETUP] in the [VCR/PLAY] menu is set to [ON], the playback picture will not be output to
the camcorder.
When [HD DOWN-CONV] is set to [ON] and you are unable to output the playback picture
to the camcorder, do not change the POWER dial from EXT.CONT. to any of the recording
programs. To do so, causes the error message “Another application is accessing the
camcorder.” to be displayed in the software status ( 2-13). In this case, disconnect and
reconnect the DV cable.
The camcorder’s SDI terminal cannot be used for outputting pictures from CONSOLE.
When setting the camcorder to EXT.CONT. the following limitations apply to CONSOLE.
- Unable to use the special playback modes.
- The sound cannot be monitored with the computer’s sound system.
- When pausing the playback, no image is displayed on the monitor.
- Unable to playback MPEG2ES picture.
- Unable to record pictures.
1
Click in the [Play Viewer] window.
CONSOLE changes its mode to the output mode, and the camcorder will be set to the
receiving mode.
While the camcorder is set to the receiving mode, recording cannot be performed.
2
Select a file in [File Browser] ( 6-52).
3
Click or double-click the selected file in [File Browser].
The playback file is displayed in [Play Viewer] and the camcorder.
Clicking pauses the playback. Clicking restarts the playback.
A few frames will not be displayed when you pause and restart the HDV standard file.
Clicking returns the camcorder mode to the recording mode.

Time Slider

• You can change the playback position by dragging the slider with the mouse.
Data droppings that occurred during recording are indicated in red.
- By clicking , the slider moves to the next data dropping point after the current position. By
clicking , the slider moves to the previous data dropping point before the current position.
While pausing the playback picture, pressing the [] or [] key on the keyboard after
moving the slider with the mouse allows you to finely adjust the position of the slider.
- When adjusting the position of the playback picture of an HDV recording with the [] or
[] key, you cannot adjust the picture frame by frame.
1 Slider
2 The slider returns to the starting point.
3 The slider moves to the data dropping point after the current position.
4 Change the time slider scale.
1342

Manual

View the manual for the Canon CONSOLE Image Control & Storage Software v1.1 here, for free. This manual comes under the category camcorders and has been rated by 1 people with an average of a 8.2. This manual is available in the following languages: English. Do you have a question about the Canon CONSOLE Image Control & Storage Software v1.1 or do you need help? Ask your question here

Index

Need help?

Do you have a question about the Canon and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Canon CONSOLE Image Control & Storage Software v1.1 specifications

Below you will find the product specifications and the manual specifications of the Canon CONSOLE Image Control & Storage Software v1.1.

General
BrandCanon
ModelCONSOLE Image Control & Storage Software v1.1
Productcamcorder
LanguageEnglish
FiletypeUser manual (PDF)

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Canon CONSOLE Image Control & Storage Software v1.1 below.

What is a megapixel?

The number of megapixels denotes how many pixels there are in the sensor. 1 megapixel equals 1 million pixels. The more pixels, the higher the potential image quality.

What does the abbreviation 'MP' stand for?

MP stands for MegaPixels.

Is the manual of the Canon CONSOLE Image Control & Storage Software v1.1 available in English?

Yes, the manual of the Canon CONSOLE Image Control & Storage Software v1.1 is available in English .

Is your question not listed? Ask your question here

No results