Canon CONSOLE Image Control & Storage Software v1.1 manual

Canon CONSOLE Image Control & Storage Software v1.1
8.2 · 1
PDF manual
 · 62 pages
English
manualCanon CONSOLE Image Control & Storage Software v1.1

Recording onto the Hard Disk

Various Settings and [Performance Check] Camera and Picture Control Recording onto the Hard Disk Playback the Recorded FilesCONSOLE Windows
5-46

Cache Recording

You can set CONSOLE to store the camcorder picture before recording. When you start recording,
the last 10 seconds previous to the recording start are also recorded in the file. By using the cache
recording, you can reduce the chances of missing the beginning of important scenes.
When you start a simultaneous recording while receiving the HDV standard signal, the cache
recording cannot be performed.
Setting the Cache Time
1
Select [Option] from the [File] menu
or click .
2
Select [General] tab, and set the
cache time.
You can select from “0 Sec.” to “10 Sec.”.
Selecting “0 Sec.” disables the cache recording
function.
When recording in DV and [Recording mode] is set to [Frame], the cache recording function
is disabled.
When recording in HDV, the cache recording time is actually longer than the time set.
The cache recording data is cleared in the following cases:
- When the frame rate is changed.
- When the sound recording mode is changed.
- When the recording mode is switched from to one of the other modes or from any
other mode to .
- When the recording standard is changed.
- When IEEE1394 (DV) is disconnected or reconnected.
Cache Recording
3
Click [OK].
1
Set the cache time. ( 5-46)
If you close CONSOLE after setting the cache time, the cache recording will begin
automatically the next time you start the software.
2
Start the recording. ( 5-45)
• CONSOLE records the cached picture and the camcorder picture onto the hard disk.
The cached picture will not be recorded on the tape.
When the recording is stopped, CONSOLE starts the cache recording again.

Manual

View the manual for the Canon CONSOLE Image Control & Storage Software v1.1 here, for free. This manual comes under the category camcorders and has been rated by 1 people with an average of a 8.2. This manual is available in the following languages: English. Do you have a question about the Canon CONSOLE Image Control & Storage Software v1.1 or do you need help? Ask your question here

Index

Need help?

Do you have a question about the Canon and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Canon CONSOLE Image Control & Storage Software v1.1 specifications

Below you will find the product specifications and the manual specifications of the Canon CONSOLE Image Control & Storage Software v1.1.

General
BrandCanon
ModelCONSOLE Image Control & Storage Software v1.1
Productcamcorder
LanguageEnglish
FiletypeUser manual (PDF)

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Canon CONSOLE Image Control & Storage Software v1.1 below.

What is a megapixel?

The number of megapixels denotes how many pixels there are in the sensor. 1 megapixel equals 1 million pixels. The more pixels, the higher the potential image quality.

What does the abbreviation 'MP' stand for?

MP stands for MegaPixels.

Is the manual of the Canon CONSOLE Image Control & Storage Software v1.1 available in English?

Yes, the manual of the Canon CONSOLE Image Control & Storage Software v1.1 is available in English .

Is your question not listed? Ask your question here

No results