Canon CONSOLE Image Control & Storage Software v1.1 manual

Canon CONSOLE Image Control & Storage Software v1.1
8.2 · 1
PDF manual
 · 62 pages
English
manualCanon CONSOLE Image Control & Storage Software v1.1

Recording onto the Hard Disk

Various Settings and [Performance Check] Camera and Picture Control Recording onto the Hard Disk Playback the Recorded FilesCONSOLE Windows
5-45

Recording a Movie File

By Operating the Camcorder
By Operating CONSOLE
1
Press the start/stop button on the camcorder.
Recording starts on both the tape in the camcorder and the hard disk.
When XL2 is connected to the computer and other IEEE1394 device is also connected at
the same time, the hard disc recording will not be started even if you press the camcorder’s
start/stop button.
When [Save custom preset file when recording start.] is selected in the [General] tab setting,
the Custom Preset file will be saved in the same folder as the video folder. The name of the
Custom Preset file is the same as the recording file name.
[ ] appears on the camcorder screen.
When no tape is inserted, or the tape is write-protected, recording is saved only on the hard
disk.
Even when the tape reaches the end, recording onto the hard disk continues.
To stop recording, press the start/stop button on the camcorder again.
1
Click in the [Camera Control]
window.
To stop recording, click .
When the frame rate was changed during recording, recording stops, and a new file will be
created when recording is resumed.
When using a laptop computer, the recording will not stop even if the display is closed.
Recording starts on both the tape in the camcorder and the hard disk.
When [Save custom preset file when recording start.] is selected in the [General] tab setting,
the Custom Preset file will be saved in the same folder as the video folder. The name of the
Custom Preset file is the same as the recording file name.
changes to , and the recording indicator in the [Rec Viewer] window
starts rotating.
When no tape is inserted, or the tape is write-protected, recording is saved only on the hard
disk.
• Even when the tape reaches the end, recording onto the hard disk continues. When you
restart the recording by pressing the camcorder’s start/stop button after changing the tape,
the camcorder will start to record on the tape, and CONSOLE will keep recording onto the
hard disk.
When recording in HDV standard on the tape and hard disk, a new file will be created after
changing the tape when you restart the recording by pressing the camcorder’s Start/Stop
button. The computer stops the recording and restarts recording onto the new file.
To record the next scene as another file in [Sequence] or [Frame] mode, finalize the file by
clicking while recording or when recording is stopped.

Manual

View the manual for the Canon CONSOLE Image Control & Storage Software v1.1 here, for free. This manual comes under the category camcorders and has been rated by 1 people with an average of a 8.2. This manual is available in the following languages: English. Do you have a question about the Canon CONSOLE Image Control & Storage Software v1.1 or do you need help? Ask your question here

Index

Need help?

Do you have a question about the Canon and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Canon CONSOLE Image Control & Storage Software v1.1 specifications

Below you will find the product specifications and the manual specifications of the Canon CONSOLE Image Control & Storage Software v1.1.

General
BrandCanon
ModelCONSOLE Image Control & Storage Software v1.1
Productcamcorder
LanguageEnglish
FiletypeUser manual (PDF)

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Canon CONSOLE Image Control & Storage Software v1.1 below.

What is a megapixel?

The number of megapixels denotes how many pixels there are in the sensor. 1 megapixel equals 1 million pixels. The more pixels, the higher the potential image quality.

What does the abbreviation 'MP' stand for?

MP stands for MegaPixels.

Is the manual of the Canon CONSOLE Image Control & Storage Software v1.1 available in English?

Yes, the manual of the Canon CONSOLE Image Control & Storage Software v1.1 is available in English .

Is your question not listed? Ask your question here

No results