Canon CONSOLE Image Control & Storage Software v1.1 manual

Canon CONSOLE Image Control & Storage Software v1.1
8.2 · 1
PDF manual
 · 62 pages
English
manualCanon CONSOLE Image Control & Storage Software v1.1

Camera and Picture Control

Various Settings and [Performance Check] Camera and Picture Control Recording onto the Hard Disk Playback the Recorded FilesCONSOLE Windows
4-37

[Custom Preset]

You can adjust, load, save and export the Custom Preset settings. For details, refer to the camcorder
instruction manual.
Depending on the camcorder connected, some parameters differ. For details, refer to the
camcorder instruction manual.
The [Custom Preset] window cannot be used when recording.
When using XL2, you need to set the camcorder’s recording program to EXT.CONT.
When using XL H1, you need to set the camcorder’s recording program to EXT.CONT. to
import and export the Custom Preset file saved on the card.
After altering the Custom Preset settings, you need to save the new settings. The
new settings will not be saved in the following cases.
- Changing the camcorder mode from EXT. CONT. to other modes or from Camera mode
to other modes
- Disconnecting the IEEE1394 (DV) cable
- Changing the position of the TAPE/CARD switch
You can change the setting using the keyboard.
- You can select the next item with the [] or [Tab] key, and go back to the previous item with
the [] or [Shift] + [Tab] keys. You can also select items by pressing [2] (down), [4] (left), [6]
(right), and [8] (up) keys.
- The parameters can be changed with the [] and [] keys.
Adjusting the Custom Preset Settings
1
Click of [Memory No.] and choose
a Custom Preset number that you wish
to adjust.
The selected Custom Preset settings are applied
to the camcorder.
The Custom Preset settings will not be applied if
[OFF] is selected.
When the camcorder is connected, the current
settings applied to the camcorder will be displayed
and [Current Setting] will be displayed in the
[Memory No.] box.
2
Enter a Custom Preset name.
To enter a new name, click on the [Preset Name] box with the mouse and press the [Enter]
key. Enter a new name and press the [Enter] key again to apply the new name.

Manual

View the manual for the Canon CONSOLE Image Control & Storage Software v1.1 here, for free. This manual comes under the category camcorders and has been rated by 1 people with an average of a 8.2. This manual is available in the following languages: English. Do you have a question about the Canon CONSOLE Image Control & Storage Software v1.1 or do you need help? Ask your question here

Index

Need help?

Do you have a question about the Canon and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Canon CONSOLE Image Control & Storage Software v1.1 specifications

Below you will find the product specifications and the manual specifications of the Canon CONSOLE Image Control & Storage Software v1.1.

General
BrandCanon
ModelCONSOLE Image Control & Storage Software v1.1
Productcamcorder
LanguageEnglish
FiletypeUser manual (PDF)

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Canon CONSOLE Image Control & Storage Software v1.1 below.

What is a megapixel?

The number of megapixels denotes how many pixels there are in the sensor. 1 megapixel equals 1 million pixels. The more pixels, the higher the potential image quality.

What does the abbreviation 'MP' stand for?

MP stands for MegaPixels.

Is the manual of the Canon CONSOLE Image Control & Storage Software v1.1 available in English?

Yes, the manual of the Canon CONSOLE Image Control & Storage Software v1.1 is available in English .

Is your question not listed? Ask your question here

No results