Canon CONSOLE Image Control & Storage Software v1.1 manual
8.2 · 1
PDF manual · 62 pages
English
manualCanon CONSOLE Image Control & Storage Software v1.1
Camera and Picture Control
Various Settings and [Performance Check]Camera and Picture ControlRecording onto the Hard DiskPlayback the Recorded FilesCONSOLE Windows
4-34
[Color Control]
The settings for [Color Correction] and skin and sky details are managed on the [Color Control]
window. You can switch over each panel by clicking the tabs.
When connecting the XL H1 or XL2, this function will not be activated.
[Color Correction]
Determining and Adjusting the Color To Be Corrected
The color correction will be set by adjusting the hue, chroma, area and Y level, the corrections will
only be applied to the set color.
•[Color Phase]: Select the basic color phase (0-15) of the color to be detected. Use the following
values as an approximate reference: 0=purple, 3=red, 6=orange, 9=green, 12=blue.
•[Chroma]: Adjust the color saturation for the color to be detected. The more you adjust to [+], the
area detected will extend to include more vivid and richer colors.
•[Area]: Adjust the color range for the color to be detected. Adjusting to [+] detects a wider color
range, and to [-] a narrower color range.
•[Y Level]: Adjust the brightness for the color to be detected. Adjusting to [+] detects brighter colors,
and to [-] detects darker colors.
1
Click the [Color Correction] tab and
of [A Area Select].
•The [Color Phase], [Chroma], [Area] and [Y Level]
sliders will be activated.
•To set the B area, click of [B Area
Select].
Adjusting the Color Correction
•[R Gain]: Adjust the red gain of the detected area. Adjusting to [+] results in stronger red tones, and
to [-] in stronger cyan tones.
•[B Gain]: Adjust the blue gain of the detected area. Adjusting to [+] results in stronger blue tones,
and to [-] in stronger yellow tones.
2
Adjust the levels of [Color Phase],
[Chroma], [Area] and [Y Level] by
moving the sliders.
•For details about each parameter, refer to the
camcorder instruction manual.
•The area that will be corrected will appear as a
white area alternating with the normal image.
3
Click of [A Area Select] to finish
the setting.
Click of [B Area Select] to finish the B area
settings.
Clicking the [Detail] tab while configuring the settings ends the setting process leaving
the settings as they are.
The Custom Preset settings cannot be adjusted while configuring the settings.
1
Click of [A Area Review].
•[R Gain] and [B Gain] sliders will be activated.
•To adjust the B area color, click of [B
Area Review].
Manual
View the manual for the Canon CONSOLE Image Control & Storage Software v1.1 here, for free. This manual comes under the category camcorders and has been rated by 1 people with an average of a 8.2. This manual is available in the following languages: English. Do you have a question about the Canon CONSOLE Image Control & Storage Software v1.1 or do you need help? Ask your question here
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Canon CONSOLE Image Control & Storage Software v1.1 below.
What is a megapixel?
The number of megapixels denotes how many pixels there are in the sensor. 1 megapixel equals 1 million pixels. The more pixels, the higher the potential image quality.
What does the abbreviation 'MP' stand for?
MP stands for MegaPixels.
Is the manual of the Canon CONSOLE Image Control & Storage Software v1.1 available in English?
Yes, the manual of the Canon CONSOLE Image Control & Storage Software v1.1 is available in English .
Need help?
Do you have a question about the Canon and is the answer not in the manual?
Question and answer
Number of questions: 0