Canon CONSOLE Image Control & Storage Software v1.1 manual

Canon CONSOLE Image Control & Storage Software v1.1
8.2 · 1
PDF manual
 · 62 pages
English
manualCanon CONSOLE Image Control & Storage Software v1.1
3

Read This First

Disclaimer

While every effort has been made to ensure that the information contained in this guide is accurate
and complete, no liability can be accepted for any errors or omissions. Canon reserves the right to
change the specifications of the hardware and software described herein at any time without prior
notice.
No part of this guide may be reproduced, transmitted, transcribed, stored in a retrieval system, or
translated into any other language in any form, by any means, without the prior written permission
of Canon.
Canon makes no warranties for damages resulting from corrupted or lost data due to mistaken
operation or malfunction of the camcorder, the software, personal computer, or peripheral devices.

Trademark Acknowledgements

Microsoft
®
and Windows
®
are either registered trademarks or trademarks of Microsoft Corporation
in the United States and/or other countries.
Other names and products not mentioned above may be registered trademarks or trademarks of
their respective companies.
Avid
®
and Avid Xpress
®
are either registered trademarks or trademarks of Avid Technology
Incorporated.
© Canon Inc. 2006 All rights reserved.

Canon camcorder compatible with CONSOLE

Following camcorder can be used with CONSOLE.
*Unable to use some functions

Required Accessories

Canon digital camcorder compatible with CONSOLE
IEEE1394 (DV) Cable
Check the manual of your computer for which type of cable to use:
XH G1 XH A1 XL H1* XL2*
4-pin: 6-pin:

System Requirements

*The software cannot be operated on Windows XP Professional x64 Edition.
Proper operation is not guaranteed on all of the systems that meet the requirements
outlined above.
Recordings cannot be made on FAT32 or FAT16 formatted hard disks.
If you set the video folder to an external hard disk, an error message “Delayed Write Failed”
may be displayed while recording onto the hard disk, and the recording may be lost.
Recordings cannot be saved on a hard disk recognized as [Removable Disk].
If you connect 4 or more devices (including the connected computer and the XL H1 itself) by
IEEE1394, CONSOLE will not run properly.
- Proper operation cannot be guaranteed if you are using a repeater.
If your computer has an IEEE1394 (DV) board/card in addition to the standard IEEE1394
(DV) board/card, or if you have several IEEE1394 (DV) boards/cards added to the
computer, the computer may not recognize the camcorder properly. In such case, see
Camcorder will not be recognized or controlled. ( Appx-59)
This software will not operate properly if more than one camcorder is connected to the
computer.
Depending on the setting of the power scheme of the laptop PC, the preview images may
not be played back smoothly. Select [Always On] in the [Power Options Properties] window.
( Appx-60)
When the computer enters stand-by mode or hangs up while running CONSOLE, proper
operation is not guaranteed after recovering.
When dealing with HDV recordings, regardless of the operations, the CPU usage may go up
to the maximum. If the usage continuously goes over the 100% for a long time, data
dropping from a file may occur, or the computer may become unstable. In such case, see
The recorded picture is lacking. ( Appx-60) and change the software settings to reduce
the usage.
To edit a file recorded in HDV, use editing software that supports the HDV standard.
This software can also be used with the recordings in 24F (NTSC only). Use an editing
software that supports the 24F frame rate.
OS Microsoft Windows XP Home Edition or Professional*
(Installation of Service Pack 2 required)
Proper operation is not guaranteed on Windows XP that has been upgraded
from a previous version.
CPU Pentium M 1.5GHz or better
Pentium 4 2GHz or better (Pentium 4 3.2GHz or better recommended)
RAM 512 MB or more (1 GB or more recommended)
Hard Disk For installation: 100MB or more of free space required
For video recording: 1GB or more of free space required
File System: NTFS
Display 1024 x 768 or more required, Full Color (32bit) required
Sound Windows XP compatible sound system
Interface IEEE1394 (OHCI compliant)

Manual

View the manual for the Canon CONSOLE Image Control & Storage Software v1.1 here, for free. This manual comes under the category camcorders and has been rated by 1 people with an average of a 8.2. This manual is available in the following languages: English. Do you have a question about the Canon CONSOLE Image Control & Storage Software v1.1 or do you need help? Ask your question here

Index

Need help?

Do you have a question about the Canon and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Canon CONSOLE Image Control & Storage Software v1.1 specifications

Below you will find the product specifications and the manual specifications of the Canon CONSOLE Image Control & Storage Software v1.1.

General
BrandCanon
ModelCONSOLE Image Control & Storage Software v1.1
Productcamcorder
LanguageEnglish
FiletypeUser manual (PDF)

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Canon CONSOLE Image Control & Storage Software v1.1 below.

What is a megapixel?

The number of megapixels denotes how many pixels there are in the sensor. 1 megapixel equals 1 million pixels. The more pixels, the higher the potential image quality.

What does the abbreviation 'MP' stand for?

MP stands for MegaPixels.

Is the manual of the Canon CONSOLE Image Control & Storage Software v1.1 available in English?

Yes, the manual of the Canon CONSOLE Image Control & Storage Software v1.1 is available in English .

Is your question not listed? Ask your question here

No results