Canon Canoscan 5000f manual

Canon Canoscan 5000f
6.5 · 1
PDF manual
 · 19 pages
English
manualCanon Canoscan 5000f
CanoScan and ScanGear are trademarks of Canon Inc.
Adobe
®
and Acrobat
®
are trademarks of Adobe Systems Incorporated.
Microsoft and Windows are registered trademarks of Microsoft Corporation in the U.S. and other countries.
Macintosh, Power Macintosh and Mac OS are trademarks of Apple Computer, Inc., registered in the U.S. and other countries.
ScanSoft and OmniPage are trademarks of ScanSoft, Inc.
Other names and products not mentioned above may be trademarks or registered trademarks of their respective companies.
In this guide, Windows XP screen shots are used to illustrate explanations common to all operating systems.

Color Image Scanner Models F917100: (CanoScan 5000/5000F)

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any interference received, including interference that may cause
undesired operation.
Note: This equipment has been tested and found to comply with the limits for class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not
occur in a particular installation.If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Use of shielded cable with the ferrite core provided with the scanner is required to comply with Class B limits Subpart B of Part 15
of the FCC rules.
Do not make any changes or modifications to the equipment unless otherwise specified in the manual. If such changes or
modifications should be made, you could be required to stop operation of the equipment.
Canon U.S.A. Inc.
One Canon Plaza, Lake Success, NY 11042, U.S.A
Tel No.(516)-328-5600

The socket-outlet shall be installed near the equipment and shall be easily accessible.

Use of a shielded cable with the ferrite core(s) provided with the scanner is necessary to comply with the technical

requirements of the EMC Directive.

Warning

When you use this product, you should pay attention to the following legal issues:
Scanning of certain documents, such as bank notes (bank bills), government bonds and public certificates, may be prohibited by
law and may result in criminal and/or civil liability.
You may be required under law to obtain authorization from a person possessing copyrights or other legal rights to the item
being scanned.
If you are uncertain of the legality of scanning any particular item, you should consult your legal adviser in advance.
As an ENERGY STAR Partner, Canon Inc. has determined that this model meets the ENERGY STAR Program for

energy efficiency.

The International ENERGY STAR Office Equipment Program is an international program that promotes energy saving

through the use of computers and other office equipment. The program backs the development and dissemination of

products with functions that effectively reduce energy consumption. It is an open system in which business proprietors can
participate voluntarily. The targeted products are office equipment such as computers, displays, printers, facsimiles,
copiers, scanners and multifunction systems. Their standards and logos are uniform among participating nations.

View the manual for the Canon Canoscan 5000f here, for free. This manual comes under the category scanners and has been rated by 1 people with an average of a 6.5. This manual is available in the following languages: English. Do you have a question about the Canon Canoscan 5000f or do you need help? Ask your question here

Need help?

Do you have a question about the Canon and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

The Canon Canoscan 5000f scanner is a reliable and efficient scanning solution. With its high-speed USB 2.0 interface, this scanner offers quick data transfer and easy connectivity to compatible devices. Featuring an optical scanning resolution of 2400 x 4800 DPI, the Canon Canoscan 5000f delivers impressive clarity and detail in scanned images and documents. Its flatbed design allows for scanning of a maximum size of 216 x 297 millimeters, making it suitable for a wide range of document types, including photographs and large documents. When it comes to speed, the Canon Canoscan 5000f doesn't disappoint. With a flatbed scan speed of 7 seconds per page for black and white A4 documents, it ensures efficient and time-saving scanning operations. This scanner also supports color scanning, enabling users to capture vibrant and true-to-life colors in their scanned documents or images. Measuring 278 x 508 x 107 millimeters and weighing 3400 grams, the Canon Canoscan 5000f offers a compact and lightweight design, making it easy to transport and store when not in use. To ensure compatibility, the Canon Canoscan 5000f is compatible with Windows 2000 Pro, ME, and XP (HomePro) operating systems. The minimum system requirements include a CPU of Intel PIII, Celeron (556 Mhz or higher), AMD Athlon, Athlon MP/XP, Duron, 128MB RAM, USB port, and a CD ROM drive. In summary, the Canon Canoscan 5000f is a reliable and feature-packed scanner that delivers high-resolution scanning, fast performance, and versatility for a variety of scanning needs.

General
BrandCanon
ModelCanoscan 5000f | 7879A003
Productscanner
LanguageEnglish
FiletypeQuickstart Guide (PDF), User manual (PDF)
Other features
I/O portsUSB
Dimensions (WxDxH)278 x 508 x 107 mm
Scanning
Optical scanning resolution2400 x 4800 DPI
Maximum scan size216 x 297 mm
Flatbed scan speed (b/w, A4)7 sec/page
Color scanningYes
Weight & dimensions
Weight3400 g
System requirements
Minimum system requirementsFor USB 2.0 High Speed Windows 2000 Pro, ME, XP (HomePro)\nCPU: Intel PIII, Celeron (556 Mhz or higher), AMD Athlon, Athlon MP/XP, Duron. 128MB RAM, USB port5, CD ROM drive.
Compatible operating systemsWindows 2000 Pro, ME, XP (HomePro)
Ports & interfaces
Standard interfacesUSB 2.0
USB portYes
USB version2.0
show more

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Canon Canoscan 5000f below.

What is the weight of the Canon Canoscan 5000f?

The Canon Canoscan 5000f has a weight of 3400 g.

What are the I/O ports of the Canon Canoscan 5000f?

The I/O ports of the Canon Canoscan 5000f are USB.

What is the optical scanning resolution of the Canon Canoscan 5000f?

The optical scanning resolution of the Canon Canoscan 5000f is 2400 x 4800 DPI.

What is the maximum scan size of the Canon Canoscan 5000f?

The maximum scan size of the Canon Canoscan 5000f is 216 x 297 mm.

How fast is the flatbed scan speed of the Canon Canoscan 5000f for black and white scans in A4 size?

The flatbed scan speed of the Canon Canoscan 5000f is 7 seconds per page.

What are the minimum system requirements for the Canon Canoscan 5000f?

The minimum system requirements for the Canon Canoscan 5000f are Windows 2000 Pro, ME, XP (HomePro) with CPU: Intel PIII, Celeron (556 Mhz or higher), AMD Athlon, Athlon MP/XP, Duron. It also requires at least 128MB RAM, USB port5, and a CD ROM drive.

How can I resolve scanning issues with the Canon Canoscan 5000f scanner?

To resolve scanning issues with the Canon Canoscan 5000f scanner, you can follow these steps: 1. Check the scanning unit: Ensure that the scanning unit is unlocked by opening the document cover and pushing the lock switch towards the unlock mark. If the scanning unit is locked, it may cause malfunctions or other problems. 2. Verify the connection: Make sure that the scanner is properly connected to your computer. Check the USB cable connection and ensure that it is securely plugged into both the scanner and the computer. 3. Install the necessary software: Ensure that you have installed the required software for the scanner. Refer to the CanoScan Setup Utility CD-ROM and follow the instructions provided to install the software correctly. 4. Troubleshoot software issues: If the scanner is not performing as expected, refer to the "Troubleshooting" section of the Scanning Guide (HTML format manual) for solutions to common software-related problems. 5. Save the scanned image: After scanning, save the scanned image by clicking the [File] menu and selecting [Save As]. Choose the desired folder to store the image, enter a file name, select a file type (JPG format is recommended), and click [Save]. If you continue to experience scanning issues, it is recommended to consult the Scanning Guide or the User's Guide (PDF format manual) for further assistance.

What should I do if the scanner is not recognized by my computer during installation and setup?

If the Canon Canoscan 5000f scanner is not recognized by your computer during installation and setup, you can try the following steps: 1. Make sure the computer is turned on and the CanoScan Setup Utility CD-ROM is inserted into the drive. 2. On Windows, when the CanoScan Setup Utility main menu appears, click on "Install the Software". On Macintosh, click on "Install the Software" from the CanoScan Setup Utility main menu. 3. Read and accept the SOFTWARE USER LICENSE AGREEMENT by clicking "Yes" if you agree to the terms. 4. Follow the on-screen instructions and click "Start Installation" to begin the installation process. The software programs and the Scanning Guide (HTML format manual) will be installed. 5. During the installation, you may be prompted to click "Yes" or "Next" to continue. Follow these prompts accordingly. 6. Once the installation is complete, click "Yes" and the computer will restart. 7. After the computer restarts, remove the CD-ROM from the drive and store it in a safe place. If the "Found New Hardware Wizard" or "Add New Hardware Wizard" appears, click "Cancel". In some cases, your operating system may require a restart. Follow the on-screen messages to restart and resume the installation. Please note that these steps are based on the information provided in the manual for the Canon Canoscan 5000f scanner.

How can I troubleshoot compatibility issues with the scanner after upgrading to Windows XP?

To troubleshoot compatibility issues with the Canon Canoscan 5000f scanner after upgrading to Windows XP, you can follow these steps: 1. Turn on your computer and insert the CanoScan Setup Utility CD-ROM into the drive. 2. The CanoScan Setup Utility main menu will appear. Click on "Install the Software". 3. Read and accept the SOFTWARE USER LICENSE AGREEMENT by clicking "Yes" if you agree to the terms. 4. Click on "Start Installation" to begin the installation process. This will install the necessary software programs and the Scanning Guide (HTML format manual). 5. Follow the on-screen instructions and click "Yes" or "Next" to continue the installation. 6. After the installation is complete, click "Yes" and the computer will restart. 7. Once Windows restarts, remove the CD-ROM from the drive and store it in a safe place. If the "Found New Hardware Wizard" or "Add New Hardware Wizard" appears, click "Cancel". In some cases, your operating system may require a restart. Follow the on-screen messages to restart and resume the installation. These steps should help resolve compatibility issues with the Canon Canoscan 5000f scanner after upgrading to Windows XP.

What steps should I follow if the scanner is not scanning at the expected speed?

If the Canon Canoscan 5000f scanner is not scanning at the expected speed, you can try the following steps to improve its performance: 1. Check the scanning resolution: Lower the scanning resolution if you are scanning at a high resolution. Higher resolutions require more processing power and can slow down the scanning speed. Adjust the resolution settings in the scanning software to a lower value. 2. Close unnecessary applications: Close any unnecessary applications running in the background on your computer. These applications can consume system resources and affect the scanning speed. Closing them will free up resources for the scanner to operate more efficiently. 3. Clean the scanner glass: Dust, smudges, or fingerprints on the scanner glass can affect the scanning speed and quality. Use a soft, lint-free cloth and a mild glass cleaner to clean the scanner glass. Ensure that the glass is completely dry before scanning. 4. Update the scanner driver: Visit the Canon website and check for any available driver updates for the Canoscan 5000f scanner. Download and install the latest driver to ensure compatibility and optimal performance. 5. Restart the computer: Sometimes, a simple restart can resolve temporary issues and improve the scanning speed. Restart your computer and try scanning again after the restart. By following these steps, you can troubleshoot and potentially improve the scanning speed of the Canon Canoscan 5000f scanner.

How can I fix issues with the scanner buttons not functioning properly?

If you are experiencing issues with the scanner buttons not functioning properly on the Canon Canoscan 5000f, you can try the following steps to resolve the problem: 1. Check the connection: Ensure that the scanner is properly connected to your computer. Check the USB cable connection and ensure that it is securely plugged into both the scanner and the computer. 2. Restart the computer: Sometimes, a simple restart can resolve temporary issues with the scanner buttons. Restart your computer and try using the scanner buttons again after the restart. 3. Update the scanner driver: Visit the Canon website and check for any available driver updates for the Canoscan 5000f scanner. Download and install the latest driver to ensure compatibility and proper functioning of the scanner buttons. 4. Check the scanner software settings: Open the scanning software on your computer and check the settings related to the scanner buttons. Ensure that the correct actions are assigned to the buttons and that they are properly configured. 5. Reset the scanner: If the above steps do not resolve the issue, you can try resetting the scanner. Refer to the User's Guide (PDF format manual) for instructions on how to reset the Canon Canoscan 5000f scanner. By following these steps, you can troubleshoot and potentially fix issues with the scanner buttons not functioning properly on the Canon Canoscan 5000f scanner.

Is the manual of the Canon Canoscan 5000f available in English?

Yes, the manual of the Canon Canoscan 5000f is available in English .

Is your question not listed? Ask your question here

No results