Canon AT-1 manual

Canon AT-1
6.9 · 1
PDF manual
 · 72 pages
English
manualCanon AT-1

Care and Storage

of

the Camera

No
matter
how
exceptional
the
camera
may be, it will
not
give
you
all
it
can unless
it
is
taken
care
of
properly.
Please
make
sure
to
keep
the
camera
clean all
the
time.
Acquire
a
blower brush, cleaning liquid, cleaning paper,
silicone
cloth,
etc.

Care

of

the Camera

Dust on
the
lens
or
the
viewfind'
er
should
first be blown
off
with
a
blower
brush.
Use
lens tissue
or
a
clean,
soft
cloth
to
remove
fingerprints or smudges
with
a gentle circular
motion,
if necessary
after
breathing
on
the
surface. It
is
best
to
wipe
the
surface
with
lens
tissue
impregnated
with
one
or
two
drops
of
cleaning liquid.
After
the
camera
has been
used on a beach or
near
the
sea, clean it well
because salt can
affect
its
mechanisms.
A
blower brush
should
also be used
to
clean
the
mirror
box
inside
the
camera
body.
If it
should
require wiping,
by
all
means,
please
take
the
camera
to
a Canon
authorized
d istri
butor.
The
film
compartment
has
to
be cleaned
with
a
blower
because it easily collects film
dust.
If
the
dust
contains
sand,
the
film
is
easily
scratched.
When cleaning
the
rail
surface
or
the
pressure
plate,
please use
cleaning
paper
and
~eaning
liquid.
Be
careful
not
to
touch
the
shutter
curtain
when
doing
so.

Maintenance

Keep
the
camera
in
a place
with
low
humidity
and
no
dust.
After
removing
the
camera
from
the
case,
take
the
battery
out
.
When
you
are going
to
store
the
camera
for
a
long
time
without
using it,
the
shutter
release
button
must
be
activated
now
and
then,
to
prevent
mold
and
mechanical
trouble
.
Please avoid
storing
the
camera
in
places
such
as
mentioned
below
.
1. Inside
the
trunk
or
rear
window
of
a car
in
the
direct
sun because
the
temperature
can
rise
to
an
extremely
high degree
and
this
may
give rise
to
trouble
in
the
camera.
2. Places
such
as
laboratories
where
chemicals are
around
may
cause
rust
or
cor-
rosion.
To
safeguard
the
durability
of
the
camera,
please
take
it
to
the
closest
Canon
authorized
distributor
once
every
three
years
at
least.
If
the
came
"ra
is
not
in
use
for
a long
time,
please use
it
only
after
closely
checking
each
and
every
part
of
it.
67

View the manual for the Canon AT-1 here, for free. This manual comes under the category not categorized and has been rated by 1 people with an average of a 6.9. This manual is available in the following languages: English. Do you have a question about the Canon AT-1 or do you need help? Ask your question here

Need help?

Do you have a question about the Canon and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

The Canon AT-1 is a 35mm film single-lens reflex (SLR) camera that was manufactured and released by Canon in the late 1970s. It is not easily categorized as it falls between the beginner-level Canon AE-1 and the more advanced Canon A-1. The AT-1 features a fully manual exposure control system, allowing photographers to manually adjust the aperture, shutter speed, and focus. It is equipped with a focal plane shutter with speeds ranging from 1 to 1/1000 seconds, plus a Bulb mode for long exposures. The camera offers a through-the-lens (TTL) exposure metering system which aids in achieving accurate exposures. Featuring a sturdy and durable construction, the AT-1 is designed to withstand regular use. Its body is primarily made of metal, ensuring its longevity and reliability. Moreover, it is compatible with a wide range of Canon FD lenses, offering photographers flexibility in their choice of optics. The AT-1 is also equipped with a hot shoe for attaching an external flash and a synchronizing socket for connecting other flash units or accessories. It utilizes a center-weighted metering system which provides reliable light meter readings. Despite its lack of automatic exposure modes and other advanced features, the Canon AT-1 remains a popular choice among photographers who prefer full manual control and value its simplicity and robustness.

General
BrandCanon
ModelAT-1 | AT1
Productnot categorized
LanguageEnglish
FiletypeUser manual (PDF)

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Canon AT-1 below.

How do I load film into the Canon AT-1?

Make sure you are in a well-lit area and follow these steps: open the back of the camera by pulling up the rewind knob, place the film cassette in the left side of the camera, pull the film leader across to the right side and insert it into the take-up spool, advance the film a few frames until it catches onto the spool, close the back of the camera, and finally, advance the film until the frame counter shows "1."

What shutter speed should I use for a moving subject?

To capture a moving subject with minimal blurriness, consider using a fast shutter speed like 1/500th of a second or faster. This will freeze the motion and result in a sharp image.

How can I adjust the exposure on the Canon AT-1?

The Canon AT-1's exposure can be adjusted by using the camera's exposure control system, which consists of the aperture priority mode. Rotate the aperture ring on the lens to select the desired aperture value, and the camera will automatically adjust the shutter speed accordingly.

How do I know if the battery is low on my Canon AT-1?

If you notice that the LED meter in the viewfinder gradually becomes dimmer or fails to light up, it is an indication that the battery is running low and needs to be replaced. This could affect the camera's exposure metering capability.

What should I do if the film advance lever gets stuck?

If the film advance lever gets stuck, try gently pressing down on the rewind release button, located on the bottom of the camera, while simultaneously turning the film advance lever in the direction of the arrow until it releases. This should allow the lever to move freely again. If the issue persists, it might require professional servicing.

Is the manual of the Canon AT-1 available in English?

Yes, the manual of the Canon AT-1 is available in English .

Is your question not listed? Ask your question here

No results