Canon AT-1 manual

Canon AT-1
6.9 · 1
PDF manual
 · 72 pages
English
manualCanon AT-1

Distance Scale

The distance scale
is
for distances
measured
from
the
film plane. This scale
is
not
generally used
except
for
confirming
the
depth
·
of
·field, performing guide
number
calculations
in
flash
photography,
or
photo·
graphing
with
infrared film .
Read
one
-digit distances
in
the
middle
of
the
number
marked
on
the
scale.
Two
-digit
distances
should
be read
at
the
point
in
the
middle
of
the
two
digits.

Depth-of-Field Scale

You
can
determine
the
depth-of-field by
checking
the
depth-of-field scale and
the
distance scale
on
the
lens barrel. Both are
closely interrelated.

Infrared Index

Mark

The
red
dot
infrared index
mark
engraved
on
the
lens barrel
is
a focusing
correction
index
mark
for infrared film. Because infrared
light rays have longer wavelengths,
they
focus
on
a plane slightly
behind
that
of
ordinary
visible light rays.
Therefore,
it
is
necessary
to
slightlly
modify
the
normal
method
of
focus-
ing
the
lens.
After
focusing
the
same
as usual,
note
the
tiny
red
dot
engraved
on
the
lens
barrel just
to
the
right
of
the
distance
index
and
turn
the
focusing ring slightly
to
align
the
focused
distance
with
this red
dot
.
For
57

View the manual for the Canon AT-1 here, for free. This manual comes under the category not categorized and has been rated by 1 people with an average of a 6.9. This manual is available in the following languages: English. Do you have a question about the Canon AT-1 or do you need help? Ask your question here

Need help?

Do you have a question about the Canon and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

The Canon AT-1 is a 35mm film single-lens reflex (SLR) camera that was manufactured and released by Canon in the late 1970s. It is not easily categorized as it falls between the beginner-level Canon AE-1 and the more advanced Canon A-1. The AT-1 features a fully manual exposure control system, allowing photographers to manually adjust the aperture, shutter speed, and focus. It is equipped with a focal plane shutter with speeds ranging from 1 to 1/1000 seconds, plus a Bulb mode for long exposures. The camera offers a through-the-lens (TTL) exposure metering system which aids in achieving accurate exposures. Featuring a sturdy and durable construction, the AT-1 is designed to withstand regular use. Its body is primarily made of metal, ensuring its longevity and reliability. Moreover, it is compatible with a wide range of Canon FD lenses, offering photographers flexibility in their choice of optics. The AT-1 is also equipped with a hot shoe for attaching an external flash and a synchronizing socket for connecting other flash units or accessories. It utilizes a center-weighted metering system which provides reliable light meter readings. Despite its lack of automatic exposure modes and other advanced features, the Canon AT-1 remains a popular choice among photographers who prefer full manual control and value its simplicity and robustness.

General
BrandCanon
ModelAT-1 | AT1
Productnot categorized
LanguageEnglish
FiletypeUser manual (PDF)

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Canon AT-1 below.

How do I load film into the Canon AT-1?

Make sure you are in a well-lit area and follow these steps: open the back of the camera by pulling up the rewind knob, place the film cassette in the left side of the camera, pull the film leader across to the right side and insert it into the take-up spool, advance the film a few frames until it catches onto the spool, close the back of the camera, and finally, advance the film until the frame counter shows "1."

What shutter speed should I use for a moving subject?

To capture a moving subject with minimal blurriness, consider using a fast shutter speed like 1/500th of a second or faster. This will freeze the motion and result in a sharp image.

How can I adjust the exposure on the Canon AT-1?

The Canon AT-1's exposure can be adjusted by using the camera's exposure control system, which consists of the aperture priority mode. Rotate the aperture ring on the lens to select the desired aperture value, and the camera will automatically adjust the shutter speed accordingly.

How do I know if the battery is low on my Canon AT-1?

If you notice that the LED meter in the viewfinder gradually becomes dimmer or fails to light up, it is an indication that the battery is running low and needs to be replaced. This could affect the camera's exposure metering capability.

What should I do if the film advance lever gets stuck?

If the film advance lever gets stuck, try gently pressing down on the rewind release button, located on the bottom of the camera, while simultaneously turning the film advance lever in the direction of the arrow until it releases. This should allow the lever to move freely again. If the issue persists, it might require professional servicing.

Is the manual of the Canon AT-1 available in English?

Yes, the manual of the Canon AT-1 is available in English .

Is your question not listed? Ask your question here

No results