Canon AT-1 manual

Canon AT-1
6.9 · 1
PDF manual
 · 72 pages
English
manualCanon AT-1
44

the moving main subject

in

the viewfinder.

You then release the

shutter

while still twist-

ing. When

you

use this technique,

the

main

subject

should be sharp even
at

slow

shutter

speeds and

the

image

of

the background

is

blurred according

to

the speed

of
the

panning

movement. This hightens the feeling
of

motion

in

the picture.

Effects

of

Changing the Aperture

The

lens

aperture

does

not

only control

exposure

but

it also has an

effect

on
the

photograph

as follows:

In

example C,

the

aperture was set

at
f/5
.6 with
the

shutter

speed dial adjusted

before

shooting

.
In

example

0,
a
f/16

setting

was used

to

clearly

demonstrate

the

diffe-

rence.

In
C,
the

miniature cars

in
the

back and

front

are blurred and only

the

miniature cars

in
the

central area are

in

focus.

In
0,

most

of
the
miniature cars are sharp and clear. Thus,
the

lens

aperture

has a marked

effect

on how

much

of
the

picture

is

reproduced sharply.

View the manual for the Canon AT-1 here, for free. This manual comes under the category not categorized and has been rated by 1 people with an average of a 6.9. This manual is available in the following languages: English. Do you have a question about the Canon AT-1 or do you need help? Ask your question here

Need help?

Do you have a question about the Canon and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

The Canon AT-1 is a 35mm film single-lens reflex (SLR) camera that was manufactured and released by Canon in the late 1970s. It is not easily categorized as it falls between the beginner-level Canon AE-1 and the more advanced Canon A-1. The AT-1 features a fully manual exposure control system, allowing photographers to manually adjust the aperture, shutter speed, and focus. It is equipped with a focal plane shutter with speeds ranging from 1 to 1/1000 seconds, plus a Bulb mode for long exposures. The camera offers a through-the-lens (TTL) exposure metering system which aids in achieving accurate exposures. Featuring a sturdy and durable construction, the AT-1 is designed to withstand regular use. Its body is primarily made of metal, ensuring its longevity and reliability. Moreover, it is compatible with a wide range of Canon FD lenses, offering photographers flexibility in their choice of optics. The AT-1 is also equipped with a hot shoe for attaching an external flash and a synchronizing socket for connecting other flash units or accessories. It utilizes a center-weighted metering system which provides reliable light meter readings. Despite its lack of automatic exposure modes and other advanced features, the Canon AT-1 remains a popular choice among photographers who prefer full manual control and value its simplicity and robustness.

General
BrandCanon
ModelAT-1 | AT1
Productnot categorized
LanguageEnglish
FiletypeUser manual (PDF)

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Canon AT-1 below.

How do I load film into the Canon AT-1?

Make sure you are in a well-lit area and follow these steps: open the back of the camera by pulling up the rewind knob, place the film cassette in the left side of the camera, pull the film leader across to the right side and insert it into the take-up spool, advance the film a few frames until it catches onto the spool, close the back of the camera, and finally, advance the film until the frame counter shows "1."

What shutter speed should I use for a moving subject?

To capture a moving subject with minimal blurriness, consider using a fast shutter speed like 1/500th of a second or faster. This will freeze the motion and result in a sharp image.

How can I adjust the exposure on the Canon AT-1?

The Canon AT-1's exposure can be adjusted by using the camera's exposure control system, which consists of the aperture priority mode. Rotate the aperture ring on the lens to select the desired aperture value, and the camera will automatically adjust the shutter speed accordingly.

How do I know if the battery is low on my Canon AT-1?

If you notice that the LED meter in the viewfinder gradually becomes dimmer or fails to light up, it is an indication that the battery is running low and needs to be replaced. This could affect the camera's exposure metering capability.

What should I do if the film advance lever gets stuck?

If the film advance lever gets stuck, try gently pressing down on the rewind release button, located on the bottom of the camera, while simultaneously turning the film advance lever in the direction of the arrow until it releases. This should allow the lever to move freely again. If the issue persists, it might require professional servicing.

Is the manual of the Canon AT-1 available in English?

Yes, the manual of the Canon AT-1 is available in English .

Is your question not listed? Ask your question here

No results