Buffalo WAPM-1266R manual

Buffalo WAPM-1266R
9.6 · 1
PDF manual
 · 96 pages
English
manualBuffalo WAPM-1266R

VLAN設定

有線LANおよび無線LANのVLAN設定を行います。

LAN設定 > VLAN設定

項目 内容
VLANモード
有線LAN端子(#1、#2)および各SSID(無線機能有効時)のVLANモードを設定します。
次のVLANモードを選択することができます。
Untagged Port
タグの付加されていないフレームのみ受信します。受信したフレームは指定した
VLANIDを付加して他のLAN端子へ転送します。
送信時には指定したVLANIDを持つフレームのみを転送します。(このとき、タグは
付加されません)
Tagged Port
タグ付きのフレーム(IEEE802.1Q準拠)を送受信できます。
TagVLAN対応のスイッチ等と組み合わせることで、異なるIDが混在したVLANネッ
トワークの中継を行うことができます。
Multiple
Untaggedを選択したときの動作に加え、追加VLANIDに指定したIDを持つフレーム
も転送します。(このとき、タグは付加されません)
Hybrid
TaggedとUntaggedの両方のフレームを受信できる設定です。
本製品の管理VLANへUntaggedでアクセスできるように、スイッチと本製品間の
VLANIDを設定しておくと、本製品の設定を初期化しても設定画面を表示できます。
VLAN ID
インターフェースVLANに固有のVLANIDを設定します。
VLANIDは、1~4094までの整数値を設定することができます。
インターフェースVLANでは、VLANモードで「TaggedPort」以外を選択したLAN端子
のみに設定することができます。
追加VLAN ID
LAN端子のVLANモードを「Multiple」に設定した場合、設定したVLANIDに加え、
VLANIDを3つまで追加することができます。
VLANIDは、1~4094までの整数値を設定することができます。
管理VLAN ID
管理VLANのVLANIDを設定します。
VLANIDは、1~4094までの整数値を設定することができます。
メモ: 本製品では管理VLANに有線LANからアクセスできるように、管理VLANIDに
設定できる値に制限しています。下記のどちらかの条件を満たす必要があります。
• 有線ポートに「TaggedPort」以外を選択している場合は、「VLANID」が管理VLAN
IDと同じであること。
• 有線ポートのいずれかがTaggedであること。
40

Manual

View the manual for the Buffalo WAPM-1266R here, for free. This manual comes under the category access points and has been rated by 1 people with an average of a 9.6. This manual is available in the following languages: English. Do you have a question about the Buffalo WAPM-1266R or do you need help? Ask your question here

Index

Need help?

Do you have a question about the Buffalo and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Buffalo WAPM-1266R specifications

Below you will find the product specifications and the manual specifications of the Buffalo WAPM-1266R.

The Buffalo WAPM-1266R is an access point that offers a maximum data transfer rate of 866 Mbit/s. It supports both 2.4 GHz and 5 GHz frequencies, allowing for flexible and efficient wireless connectivity. The product is certified to meet RoHS and VCCI Cl. B standards, ensuring its compliance with environmental and electromagnetic compatibility regulations. With MAC address filtering capability, the access point provides an added layer of security by allowing only authorized devices to connect to the network. It is designed to be compatible with various networking standards, including IEEE 802.11a, IEEE 802.11ac, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.1Q, IEEE 802.1w, IEEE 802.3, IEEE 802.3ab, IEEE 802.3at, IEEE 802.3az, IEEE 802.3u, and IEEE 802.3x. The Buffalo WAPM-1266R supports Power over Ethernet (PoE), enabling both power and data transmission over a single Ethernet cable, simplifying installation and reducing clutter. It does not come with an internal option, making it suitable for external usage. Each package includes one access point unit. The access point can be easily placed on the ceiling, table, or wall, providing flexibility in terms of its physical location. It features a built-in DHCP server, allowing for automatic assignment of IP addresses to devices on the network. The Ethernet LAN data rates supported by the product are 10,100,1000 Mbit/s, accommodating high-speed data transmission. Overall, the Buffalo WAPM-1266R is a versatile and reliable access point that offers fast wireless connectivity, advanced security features, and compatibility with various networking standards. Its Power over Ethernet support and flexible placement options make it suitable for a wide range of environments and applications.

General
BrandBuffalo
ModelWAPM-1266R | WAPM-1266R
Productaccess point
EAN4981254041864
LanguageEnglish
FiletypeUser manual (PDF)
Design
Product colorWhite
CertificationRoHS, VCCI Cl. B
InternalNo
PlacementCeiling, Table, Wall
LED indicatorsPower, WLAN
On/off switchYes
Features
Maximum data transfer rate866 Mbit/s
2.4 GHzYes
5 GHzYes
Networking standardsIEEE 802.11a, IEEE 802.11ac, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.1Q, IEEE 802.1w, IEEE 802.3, IEEE 802.3ab, IEEE 802.3at, IEEE 802.3az, IEEE 802.3u, IEEE 802.3x
Ethernet LAN data rates10,100,1000 Mbit/s
VLAN supportYes
Number of VLAN IDs4095
Virtual LAN featuresTagged VLAN
Auto MDI/MDI-XYes
Flow control supportYes
Spread spectrum methodDSSS, OFDM
Quality of Service (QoS) supportYes
Maximum data transfer rate (5 GHz)867 Mbit/s
Security
MAC address filteringYes
Security algorithms64-bit WEP, 128-bit WEP, 802.1x RADIUS, PEAP, SSL/TLS, TTLS, WPA, WPA-AES, WPA-EAP, WPA-TKIP, WPA2, WPA2-AES, WPA2-EAP, WPA2-TKIP
Number of SSID supported32
Auto Wireless Distribution System (WDS)Yes
Power
Power over Ethernet (PoE)Yes
Power consumption (max)18 W
AC input voltage100 - 240 V
AC input frequency50 - 60 Hz
Packaging content
Number of products included1 pc(s)
Mounting kitYes
Protocols
DHCP serverYes
Management protocolsSNMP v1/v2c/v3
Operational conditions
Operating relative humidity (H-H)10 - 90 %
Operating temperature (T-T)0 - 50 °C
Weight & dimensions
Weight800 g
Width175 mm
Depth45 mm
Height200 mm
Ports & interfaces
USB 2.0 ports quantity1
USB connector typeUSB Type-A
DC-in jackYes
Ethernet LAN (RJ-45) ports3
Antenna
Antennas quantity2
Performance
Compatible operating systemsWindows 10/8.1/7
Management features
Firmware upgradeableYes
SyslogYes
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Buffalo WAPM-1266R below.

What is the weight of the Buffalo WAPM-1266R?

The Buffalo WAPM-1266R has a weight of 800 g.

What certifications does the Buffalo WAPM-1266R have?

The Buffalo WAPM-1266R has the following certifications: RoHS, VCCI Cl. B.

What is the height of the Buffalo WAPM-1266R?

The Buffalo WAPM-1266R has a height of 200 mm.

What is the width of the Buffalo WAPM-1266R?

The Buffalo WAPM-1266R has a width of 175 mm.

What is the depth of the Buffalo WAPM-1266R?

The Buffalo WAPM-1266R has a depth of 45 mm.

What type of USB connection does the Buffalo WAPM-1266R have?

The Buffalo WAPM-1266R has a USB Type-A connection.

Does Buffalo WAPM-1266R support both 2.4 GHz and 5 GHz frequencies?

Yes, Buffalo WAPM-1266R supports both 2.4 GHz and 5 GHz frequencies, which allows for faster and more reliable wireless connections in various environments.

Is MAC address filtering available on Buffalo WAPM-1266R?

Yes, MAC address filtering is available on Buffalo WAPM-1266R, providing an additional layer of security by only allowing specific devices to connect to the network.

Does Buffalo WAPM-1266R support Power over Ethernet (PoE)?

Yes, Buffalo WAPM-1266R supports Power over Ethernet, allowing for easy installation in areas where power outlets are limited or non-existent.

How many VLAN IDs does Buffalo WAPM-1266R support?

Buffalo WAPM-1266R supports a high number of VLAN IDs, with up to 4095 VLANs, which is beneficial for segregating network traffic and improving network performance.

What is the maximum power consumption of Buffalo WAPM-1266R?

The maximum power consumption of Buffalo WAPM-1266R is 18 Watts, which is relatively low compared to other access points in the market, making it an energy-efficient option.

What could be the possible reasons for experiencing slow data transfer speeds on the Buffalo WAPM-1266R access point?

Possible reasons for experiencing slow data transfer speeds on the Buffalo WAPM-1266R access point could include interference from other electronic devices, outdated firmware, inadequate signal strength, or network congestion. To address this, you can try relocating the access point to minimize interference, updating the firmware to the latest version, optimizing the placement of the access point for better signal coverage, and managing network traffic to reduce congestion. Additionally, checking for any physical obstructions blocking the signal and ensuring proper ventilation around the access point can also help improve data transfer speeds.

How can I improve the data transfer speeds for IEEE 802.11n/a/g/b on the Buffalo WAPM-1266R access point?

To improve data transfer speeds for IEEE 802.11n/a/g/b on the Buffalo WAPM-1266R access point, follow these steps: 1. Ensure the access point is placed in a central location to maximize coverage and signal strength. 2. Avoid interference from other electronic devices by keeping them away from the access point. 3. Update the access point's firmware to the latest version to benefit from performance enhancements. 4. Enable Quality of Service (QoS) settings to prioritize data traffic for a smoother experience. 5. Use compatible devices that support the same wireless standards for optimal performance. 6. Consider upgrading to a higher-tier internet plan to increase overall data speeds. 7. Regularly monitor and manage connected devices to prevent network congestion. 8. Implement security measures like WPA2 encryption to safeguard data and maintain network efficiency.

What are the wired LAN interface specifications of the Buffalo WAPM-1266R access point?

The wired LAN interface specifications of the Buffalo WAPM-1266R access point are as follows: - It complies with IEEE 802.3ab (1000BASE-T), IEEE 802.3u (100BASE-TX), and IEEE 802.3 (10BASE-T) standards. - The data transfer speed is 10/100/1000 megabits per second (automatically recognized/fixed). - It supports half-duplex/full-duplex data transmission modes (automatically recognized/fixed). - The transmission line encoding methods include 8B1Q4, PAM5 (1000BASE-T), 4B5B, MLT-3 (100BASE-TX), and Manchester coding (10BASE-T). - It operates using a store-and-forward switching method. - The access point features one PoE-powered LAN port (LAN1) and one LAN port (LAN2), both equipped with RJ-45 connectors that support AUTO-MDIX. - The maximum power consumption is 18 watts, with a maximum current consumption of 420 mA (PoE) or 1.6 A (with a separately sold AC adapter). - The access point's dimensions are approximately 175 mm (width) x 200 mm (height) x 45 mm (depth), excluding antennas and protrusions. - It weighs around 800 grams (main unit only). - The operating temperature range is 0 to 50 degrees Celsius, with a humidity range of 10 to 90%.

What is the maximum power consumption of the Buffalo WAPM-1266R access point?

The maximum power consumption of the Buffalo WAPM-1266R access point is 18 watts.

Is the manual of the Buffalo WAPM-1266R available in English?

Yes, the manual of the Buffalo WAPM-1266R is available in English .

Is your question not listed? Ask your question here

No results