Britax KIDFIX SL manual

Britax KIDFIX SL
6.7 · 1
PDF manual
 · 2 pages
English
manualBritax KIDFIX SL
01 02
03
10
15
16
08

15 to 36 kg

(~4 to 12 years of age)

User instructions
06
07
SICT Fastening points ISOFIT Locking arms SICT Release buttonSICT (only KIDFIX SL SICT)ISOFIX insertion aidsISOFIX fastening points (vehicle)Belt guide (bright red)
01
02
03
04
05
06
07
Headrest Seat cushionBelt holderISOFIT Locking button Compartment for user manual
08
09
10
ISOFIT Adjustment button
11
Adjustment belt
12
13
14
05
11
09
04
12
13
14
Backrest Headrest adjustment handle
15
16
www.britax.eu
2000010049 15/04
GB

KIDFIX SL

KIDFIX SL SICT

2. INTRODUCTION
Thank you for choosing
KIDFIX SL / KIDFIX SL SICT
to keep your child safe
through a new stage of their life.
In order to protect your child correctly, the
KIDFIX SL / KIDFIX SL SICT
must always be used and installed as described in these instructions.
If you have any further questions regarding its use, please feel free to contact
us:
BRITAX RÖMER
Kindersicherheit GmbH
Blaubeurer Straße 71
D-89077 Ulm
Germany
T.: +49 (0) 731 9345-199/-299
F.: +49 (0) 731 9345-210
E.: service.de@britax.com
www.britax.eu
BRITAX EXCELSIOR
LIMITED
1 Churchill Way West
Andover
Hampshire SP10 3UW
United Kingdom
T.: +44 (0) 1264 333343
F.: +44 (0) 1264 334146
E.:
service.uk@britax.com
www.britax.eu
These instructions use the following symbols stated below:
Symbol Keyword Explanation
DANGER! Risk of severe personal injury
WARNING! Risk of minor personal injury
CAUTION! Risk of material damage
TIP: Useful notes
Instructions that follow a set sequence are numbered.
Example:
1. Press the button...
18
17
Belt guide colours
For better differentiation, the two vehicle seat
belts are highlighted in different colours. The di-
agonal seat belt
18
in dark red and the lap belt
17
in bright red. The colour of the belt guides
on the child safety seat follows the same colour
scheme.
4. USE IN THE VEHICLE
Please observe the instructions for using children's restraining systems in the operating
instructions of your vehicle. The seat can be used in vehicles with ISOFIX anchoring systems
(see type list) and in vehicles with a 3-point belt.
3lease ¿nd the information on the seats approved for child safety seats of the weight classes 15
to 36 kg in the operating instructions of your vehicle.
The KIDFIX SL / KIDFIX SL SICT is approved for two different methods of installation:
Symbol Installation type Approval type Section
with the ISOFIT locking arms into the
ISOFIX fastening points in the vehi-
cle. Check the list of vehicle types.
semi-univer-
sal
a)
9A
with the vehicle's 3-point seatbelt
universal
9B
a)
This means that the child safety seat may only be used in vehicles that are listed in the
vehicle type list enclosed. This type list is consistently kept up to date. The latest version
can be obtained from us or from www.britax.eu / www.roemer.eu.
You can use your child safety seat as follows:
In the direction of travel Yes
Against the direction of travel no
1)
with 2-point belt no
with 3-point belt
2)
Yes
with ISOFIX fastening points
(between seat surface and
backrest)
Yes
on front passenger seat Yes
3)
on outer rear seat Yes
on centre rear seat (with
3-point belt)
Yes
4)
1) Use is permitted on a rearward-facing vehicle seat (e.g. in a van or minibus) only if the
vehicle seat is also approved for use by adults. The seat may not be in the area of effect of
an airbag.
2) The safety belt must be approved to ECE R 16 or a comparable standard (see test label on
belt with an "E" or "e" in a circle).
3) If there is a front airbag: Slide the vehicle seat a long way back and refer to any instructions
in vehicle owner's manual.
4) Cannot be used if the vehicle seat is equipped with only a 2-point belt.
15–36 kg
3. Certification
BRITAX RÖMER Child safety seatTesting and certi¿cationIn accordance with ECE* R 44/04Group Body weightKIDFIX SL KIDFIX SL SICT
II+III 15 to 36 kg
*ECE = European Standard for Child Safety Equipment
The child safety seat has been designed, tested and certi¿ed according
to the requirements of the European Standard for Child Safety Equipment
(ECE R 44/04). The seal of approval E (in a circle) and the approval number
are located on the orange approval label (sticker on the child safety seat).
DANGER! This approval will be invalidated if you make any modi¿ca-
tions to the child safety seat. Only the manufacturer is permit-
ted to make modi¿cations to the child safety seat.
WARNING! Use the
KIDFIX SL / KIDFIX SL SICT
exclusively for secur-
ing your child in your vehicle. It is in no way suitable as a
seat or toy in the home.
DANGER! Never secure your child or the child safety seat with a 2-point
belt. If you secure your child in the child seat with only a
2-point belt, then in the event of an accident this may cause
serious injuries to your child, possibly resulting in death.

PAGE I

6. DISASSEMBLY AND DISPOSAL
1. PRODUCT OVERVIEW
1. Operate the release button of your vehicle seat
buckle.
2. Pull out the diagonal belt from the dark red belt hold-
er
09
on the headrest
14
Only for installation type A (ISOFIT):
3. Press the red ISOFIT locking button to release the
ISOFIT fastening
08
and pull out the ISOFIT locking
arm
07
. Repeat the procedure with the other ISOFIT
locking arm
07
.
4. Pull on the adjustment belt
12
until both ISOFIT
locking arms
07
are in the storage position.
ŹThe child safety seat can now be removed.
DANGER! the child safety seat must always be
secured when it is in the vehicle, even if no child is
being transported.
DISPOSAL:Please observe the waste disposal regulations in your country.
Disposal of packaging Container for cardboard boxes
Seat cover Residual waste, thermal utilisation
Plastic parts According to the labelling in the corre-
sponding container
Metal parts Container for metals
Belt straps Container for polyester
buckle and tongue Residual waste
06
12
REMOVAL:UNFASTENING YOUR CHILD:
1. To unfasten your child, use the release button of your vehicle seat buckle.
08
06
08
06
Removing the seat cover
1.
Moving the headrest of the vehicle seat into the top
position.
2. Unhook the cover hooks
20
on the rear of the back-
rest
16
.
3.
Remove the upper part of the cover.
4. Unhook the cover loops
21
at the bottom on the rear
of the backrest
16
5. Pull off the cover from the seat cushion
10
.
Removing the headrest cover
6.
Unhook the cover loops
21
on the back of the head-
rest
14
.
7. Unhook the cover hooks
20
on the front of the back-
rest
16
8.
Pull off the cover of the headrest
14
.
Ź The cover can now be washed.
Please observe the
instructions on the washing label of the cover:
Re-¿tting the cover
Proceed in reverse order to put on the cover.
5. CARE AND MAINTENANCE
20
14
20
21
21
Please ensure that you only use the original BRITAX RÖMER replacement seat
covers, as the seat cover is an integral part of the child safety seat and ful¿ls
important functions to ensure the smooth operation of the system. Replacement
seat covers are available from your dealer or from an ADAC of¿ce.
The cover can be removed and washed with a mild detergent in the delicates
programme of the washing machine (30 °C). Please observe the instructions
on the washing label of the cover.
The plastic parts can be cleaned using soapy water. Do not use any caustic
cleaning agents (such as solvents).
DANGER! The child seat must not be used without the seat cover.
To release the SICT,
03
press the SICT release button
04
and remove the SICT
03
.
03
04
150415_KIDFIX_SL_KIDFIX_SL_SICT_GB.indd 1 15.04.2015 08:23:30

View the manual for the Britax KIDFIX SL here, for free. This manual comes under the category Car seats and has been rated by 1 people with an average of a 6.7. This manual is available in the following languages: English. Do you have a question about the Britax KIDFIX SL or do you need help? Ask your question here

Need help?

Do you have a question about the Britax and the answer is not in the manual? Ask your question here. Provide a clear and comprehensive description of the problem and your question. The better your problem and question is described, the easier it is for other Britax owners to provide you with a good answer.

Number of questions: 0

General
Britax
KIDFIX SL | 4000984106480
Car seat
4000984134612, 4000984134629, 4000984134636, 4000984134643, 4000984106480
English
User manual (PDF)
Features
Car seat group2-3 (15 - 36 kg; 3.5 - 12 years)
Belt fastening type3-point
Mounting typeISOFIX
Adjustable headrest
Product colourBlue
Weight & dimensions
Width490 mm
Depth450 mm
Height (min)660 mm
Height (max)850 mm
Weight6700 g
show more

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Britax KIDFIX SL below.

Is your question not listed? Ask your question here

No results