Brickcom VD-502AP manual

Brickcom VD-502AP
  • Number of pages: 30
  • Filetype: PDF

Hardware User’s Manual

Megapixel Day & Night
Vandal Dome Network Camera
Quality Service Group
Vandal Dome V2 Series
Brickcom VD-502AP

Need help?

Number of questions: 0

Do you have a question about the Brickcom VD-502AP or do you need help? Ask your question here. Provide a clear and comprehensive description of the issue and your question. The more detail you provide for your issue and question, the easier it will be for other Brickcom VD-502AP owners to properly answer your question.

View the manual for the Brickcom VD-502AP here, for free. This manual comes under the category Security cameras and has been rated by 1 people with an average of a 8.3. This manual is available in the following languages: English. Do you have a question about the Brickcom VD-502AP or do you need help? Ask your question here

Brickcom VD-502AP specifications

Brand Brickcom
Model VD-502AP
Product Security camera
Language English
Filetype PDF
Maximum resolution 2592 x 1944 pixels
Video formats supported H.264,M-JPEG,MPEG4
Supported graphics resolutions 1536 x 2048,1280 x 720 (HD 720),1920 x 1080 (HD 1080)
Supported video modes 1080p,720p
Frame rate 30 fps
Total megapixels 2 MP
Minimum illumination 0 lx
Viewing angle, horizontal 90 °
Viewing angle, vertical 65 °
White balance Auto
Camera shutter type Electronic
Camera shutter speed 1/20000 s
Image sensor
Sensor type CMOS
Optical sensor size 1/2.5 "
Lens system
Optical zoom - x
Focal length range 3.3 - 10.5 mm
Video motion detection
HTTPS encryption
Flash memory 32 MB
Internal memory 256 MB
Built-in HDD
Card reader integrated
Compatible memory cards SD,SDHC
Night vision
Night vision
Night vision distance 10 m
LED type IR
Infra-red wavelength 850 nm
Type IP security camera
PTZ control -
Placement supported Outdoor
Day/night mode
GPS (satellite)
Alarm input/output
Connectivity technology Wired
Certification FCC, CE, IK10
Form factor Dome
Product colour White
Mounting type Ceiling
LED indicators
International Protection (IP) code IP67
Management features
Reset button
Ports & interfaces
Interface RJ-45
Ethernet LAN (RJ-45) ports 1
DC-in jack
Audio formats supported AMR
Signal-to-Noise Ratio (SNR) 38.1 dB
Ethernet LAN
Cabling technology 10/100Base-T(X)
Wi-Fi -
Supported network protocols TCP/IP, UDP, ICMP, DHCP, NTP, DNS, DDNS, SMTP, FTP, HTTP, Samba, PPPoE, UPnP, RTP, RTSP
Weight & dimensions
Width 113.75 mm
Depth 113.75 mm
Height 144.25 mm
Diameter 113.75 mm
Weight 860 g
Power over Ethernet (PoE)
Power consumption (typical) 10 W
DC output voltage +12V
Power source type PoE
Other features
Power LED
Packaging content
Operational conditions
Operating temperature (T-T) -20 - 50 °C
Operating relative humidity (H-H) 10 - 80 %
show more

Frequently Asked Questions

Below, you will find the most frequently asked questions about the Brickcom VD-502AP.

Is your question not listed? Ask your question here