Brickcom VD-132NP manual

Brickcom VD-132NP
  • Number of pages: 84
  • Filetype: PDF

Network Camera

Brickcom Software User’s Manual

Brickcom VD-132NP

Need help?

Number of questions: 0

Do you have a question about the Brickcom VD-132NP or do you need help? Ask your question here. Provide a clear and comprehensive description of the issue and your question. The more detail you provide for your issue and question, the easier it will be for other Brickcom VD-132NP owners to properly answer your question.

View the manual for the Brickcom VD-132NP here, for free. This manual comes under the category Security cameras and has been rated by 1 people with an average of a 7.5. This manual is available in the following languages: English. Do you have a question about the Brickcom VD-132NP or do you need help? Ask your question here

Brickcom VD-132NP specifications

Brand Brickcom
Model VD-132NP
Product Security camera
EAN 639713435153
Language English
Filetype PDF
Maximum resolution 1280 x 1024 pixels
Video formats supported H.264,M-JPEG,MPEG4
Supported graphics resolutions 1280 x 1024 (SXGA),1280 x 720 (HD 720)
Supported video modes 720p
Frame rate 30 fps
Total megapixels 1.3 MP
Minimum illumination 0 lx
Viewing angle, horizontal 90 °
Viewing angle, vertical 70 °
White balance Auto
Camera shutter type Electronic
Camera shutter speed 1/32000 s
Image sensor
Sensor type CMOS
Optical sensor size 1/3 "
Lens system
Optical zoom - x
Video motion detection
HTTPS encryption
Flash memory 16 MB
Internal memory 128 MB
Built-in HDD
Card reader integrated
Compatible memory cards SD,SDHC
Night vision
Night vision
Night vision distance 10 m
LED type IR
Type IP security camera
PTZ control -
Placement supported Outdoor
Wide Dynamic Range (WDR)
Day/night mode
GPS (satellite)
Alarm input/output
Connectivity technology Wired
Certification FCC, CE,IK10
Form factor Dome
Product colour White
Mounting type Ceiling
LED indicators
International Protection (IP) code IP67
Ports & interfaces
Interface RS-232
Microphone in
Ethernet LAN (RJ-45) ports 1
DC-in jack
Audio formats supported AMR
Signal-to-Noise Ratio (SNR) 50 dB
Audio system 2-way
Ethernet LAN
Cabling technology 10/100Base-T(X)
Wi-Fi -
Supported network protocols TCP/IP, UDP, ICMP, DHCP, NTP, DNS, DDNS, SMTP, FTP, HTTP, Samba, PPPoE, UPnP, RTP, RTSP, RTCP
Weight & dimensions
Width 113.75 mm
Depth 113.75 mm
Height 144.25 mm
Diameter 113.75 mm
Weight 860 g
Power over Ethernet (PoE)
Power consumption (typical) 10 W
DC output voltage +12V
Power source type PoE
Other features
Power LED
Packaging content
Operational conditions
Operating temperature (T-T) -20 - 60 °C
Operating relative humidity (H-H) 10 - 80 %
show more

Frequently Asked Questions

Below, you will find the most frequently asked questions about the Brickcom VD-132NP.

Is your question not listed? Ask your question here