View the manual for the Brickcom GOB-100Ap here, for free. This manual comes under the category Security cameras and has been rated by 1 people with an average of a 9.6. This manual is available in the following languages: English. Do you have a question about the Brickcom GOB-100Ap or do you need help? Ask your question here
Below you will find the product specifications and the manual specifications of the Brickcom GOB-100Ap.
Brand | Brickcom |
Model | GOB-100Ap |
Product | Security camera |
Language | English |
Filetype |
Maximum resolution | 1280 x 800 pixels |
Video formats supported | H.264,M-JPEG,MPEG4 |
Supported graphics resolutions | 320 x 192,320 x 240,640 x 400,1280 x 720 (HD 720),1280 x 800 (WXGA),640 x 480 (VGA) |
Supported video modes | 720p |
Frame rate | 30 fps |
Total megapixels | 1 MP |
Minimum illumination | 0.5 lx |
Field of view (FOV) angle | 85 ° |
Viewing angle, horizontal | 70 ° |
Viewing angle, vertical | 42 ° |
Camera shutter speed | 1/5 - 1/20000 s |
Sensor type | CMOS |
Optical sensor size | 1/4 " |
Optical zoom | - x |
Focal length range | 3.3 - 12 mm |
Flash memory | 16 MB |
Internal memory | 128 MB |
Built-in HDD | ✗ |
Card reader integrated | ✓ |
Compatible memory cards | microSD (TransFlash),microSDHC |
Night vision | ✓ |
Night vision distance | 15 m |
LED type | IR |
Number of illumination LEDs | 24 |
Infra-red wavelength | 850 nm |
Type | IP security camera |
PTZ control | - |
Placement supported | Outdoor |
Day/night mode | ✓ |
Connectivity technology | Wired |
Certification | FCC, CE |
Form factor | Bullet |
Product colour | Black,Silver |
Protection features | Water resistant |
LED indicators | Link,Power,Status |
International Protection (IP) code | IP67 |
Reset button | ✓ |
Interface | RJ-45 |
Microphone in | ✓ |
DC-in jack | ✓ |
Audio formats supported | AMR,PCM |
Audio system | 2-way |
Ethernet LAN | ✓ |
Cabling technology | 10/100Base-T(X) |
Wi-Fi | ✗ |
Supported network protocols | TCP/IP, UDP, ICMP, DHCP, NTP, DNS, DDNS, SMTP, FTP, HTTP, Samba, PPPoE, UPnP, RTP, RTSP, RTCP, IPv6 |
Depth | 82 mm |
Height | 213 mm |
Weight | 1150 g |
Power over Ethernet (PoE) | ✓ |
Power consumption (typical) | 25 W |
Power source type | PoE |
Power LED | ✓ |
Power requirements | DC48V/0.8A |
F-number (relative aperture) | 1.4 |
Networking features | Fast Ethernet |
Operating temperature (T-T) | -40 - 60 °C |
Operating relative humidity (H-H) | 10 - 80 % |
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Brickcom GOB-100Ap below.
Is your question not listed? Ask your question here
No results
Need help?
Do you have a question about the Brickcom and the answer is not in the manual? Ask your question here. Provide a clear and comprehensive description of the problem and your question. The better your problem and question is described, the easier it is for other Samsung Galaxy A7 owners to provide you with a good answer.
Number of questions: 0