Brickcom FD-132NP manual

Brickcom FD-132NP
(1)
  • Number of pages: 32
  • Filetype: PDF

Hardware User’s Manual

Megapixel Day & Night
Fixed Dome Network Camera
Quality Service Group
Fixed Dome Series
Brickcom FD-132NP

Need help?

Number of questions: 0

Do you have a question about the Brickcom FD-132NP or do you need help? Ask your question here. Provide a clear and comprehensive description of the issue and your question. The more detail you provide for your issue and question, the easier it will be for other Brickcom FD-132NP owners to properly answer your question.

View the manual for the Brickcom FD-132NP here, for free. This manual comes under the category Security cameras and has been rated by 1 people with an average of a 8.6. This manual is available in the following languages: English. Do you have a question about the Brickcom FD-132NP or do you need help? Ask your question here

Brickcom FD-132NP specifications

General
Brand Brickcom
Model FD-132NP
Product Security camera
EAN 639713435122
Language English
Filetype PDF
Video
Maximum resolution 1280 x 1024 pixels
Video formats supported H.264,M-JPEG,MPEG4
Supported graphics resolutions 1280 x 1024 (SXGA),1280 x 720 (HD 720)
Supported video modes 720p
Frame rate 30 fps
Total megapixels 1.3 MP
Camera
Minimum illumination 0 lx
Viewing angle, horizontal 90 °
Viewing angle, vertical 70 °
White balance Auto
Camera shutter type Electronic
Camera shutter speed 1/32000 s
Image sensor
Sensor type CMOS
Optical sensor size 1/3 "
Lens system
Optical zoom - x
Security
Video motion detection
HTTPS encryption
Storage
Flash memory 16 MB
Internal memory 128 MB
Built-in HDD
Card reader integrated
Compatible memory cards SD,SDHC
Night vision
Night vision
Night vision distance 10 m
LED type IR
Infra-red wavelength 850 nm
Performance
Type IP security camera
PTZ control -
Placement supported Indoor
Wide Dynamic Range (WDR)
Day/night mode
GPS (satellite)
Alarm input/output
Connectivity technology Wired
Certification FCC, CE
Design
Form factor Dome
Product colour White
Mounting type Ceiling
LED indicators
Management features
Reset button
Ports & interfaces
Interface RJ-45
Ethernet LAN (RJ-45) ports 1
DC-in jack
Audio
Audio formats supported AMR
Signal-to-Noise Ratio (SNR) 50 dB
Network
Ethernet LAN
Cabling technology 10/100Base-T(X)
Wi-Fi -
Supported network protocols TCP/IP, UDP, ICMP, DHCP, NTP, DNS, DDNS, SMTP, FTP, HTTP, Samba, PPPoE, UPnP, RTP, RTSP
Weight & dimensions
Width 149.95 mm
Depth 149.95 mm
Height 115.6 mm
Diameter 149.95 mm
Weight 509 g
Power
Power over Ethernet (PoE)
Power consumption (typical) 8 W
DC output current 1 A
DC output voltage +12V
Power source type PoE
Other features
Power LED
Packaging content
Manual
Operational conditions
Operating temperature (T-T) 0 - 50 °C
Operating relative humidity (H-H) 10 - 80 %
show more

Frequently Asked Questions

Below, you will find the most frequently asked questions about the Brickcom FD-132NP.

Is your question not listed? Ask your question here