View the manual for the Boss BE950WCPA here, for free. This manual comes under the category receivers and has been rated by 1 people with an average of a 7.5. This manual is available in the following languages: English. Do you have a question about the Boss BE950WCPA or do you need help? Ask your question here
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Boss BE950WCPA below.
A volume above 80 decibels can be harmful to hearing. When the volume exceeds 120 decibels, direct damage can even occur. The chance of hearing damage depends on the listening frequency and duration.
Yes, bluetooth is a universal method that allows different devices equipped with bluetooth to connect to each other.
Bluetooth is a way of exchanging data wirelessly between electronic devices via radio waves. The distance between the two devices that exchange data can in most cases be no more than ten metres.
HDMI stands for High-Definition Multimedia Interface. An HDMI cable is used to transport audio and video signals between devices.
A slightly damp cleaning cloth or soft, dust-free cloth works best to remove fingerprints. Dust in hard-to-reach places is best removed with compressed air.
Dolby Atmos is a technology that ensures that the sound is reflected from the ceiling to where you are listening. This makes it possible to create a 5.1 effect with only 1 speaker.
On the front panel of the receiver, there should be a button labeled "Input" or "Source." Press that button and use the corresponding buttons or knob to select the desired input source such as CD, AUX, or Bluetooth.
Look for a button or menu option labeled "Audio" or "Sound." Press that button and use the navigation buttons or knob to access the various audio settings such as bass, treble, balance, or surround sound. Adjust each setting according to your preferences.
Yes, absolutely! Locate the speaker terminals on the back panel of the receiver. Connect the positive (+) and negative (-) terminals of each speaker to the corresponding terminals on the receiver using speaker wire. Ensure a secure connection for optimal sound quality.
Press the "Tuning" or "Radio" button on the receiver. Use the navigation buttons or knob to scroll through the available radio bands (FM or AM) and press the button or select the band. Then, use the tuning buttons or knob to search for and tune in to the desired radio station. You can usually store the stations as presets for easier access later.
Absolutely! The receiver should have Bluetooth capability. On your mobile device, activate Bluetooth and scan for available devices. Once the Boss BE950WCPA appears in the list, select it to establish a connection. You can now stream audio wirelessly from your mobile device to the receiver.
Yes, the manual of the Boss BE950WCPA is available in English .
Is your question not listed? Ask your question here