View the manual for the Bosch WTW87449SN here, for free. This manual comes under the category dryers and has been rated by 1 people with an average of a 7.9. This manual is available in the following languages: English. Do you have a question about the Bosch WTW87449SN or do you need help? Ask your question here





| Brand | Bosch |
| Model | WTW87449SN | WTW87449SN |
| Product | dryer |
| EAN | 4242002832975 |
| Language | English |
| Filetype | User manual (PDF) |
| Appliance placement | Freestanding |
| Loading type | Front-load |
| Drying system | Heat pump |
| Product color | White |
| Door hinge | Right |
| Control type | Rotary, Touch |
| Drum volume | 112 L |
| Built-in display | Yes |
| Display type | LED |
| Cord length | 1.45 m |
| Drum capacity | 9 kg |
| Drying class | - |
| Cycle time | 120 min |
| Noise level | 64 dB |
| Delayed start timer | - |
| Self-cleaning | Yes |
| Energy efficiency class | A++ |
| Connected load | 1000 W |
| AC input voltage | 220-240 V |
| AC input frequency | 50 Hz |
| Energy consumption | - kWh |
| Annual energy consumption | 259 kWh |
| Heat source | Electric |
| Current | 10 A |
| Width | 598 mm |
| Depth | 652 mm |
| Height | 842 mm |
| Weight | 55000 g |
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Bosch WTW87449SN below.
A condenser dryer is a dryer in which condensation ends up in a reservoir.
A drain dryer is a dryer in which the warm air and condensation are drained through a hose.
It is best to wipe the dryer drum with a damp cloth and some lemon cleaner.
Check the following: - That the fluff filter is clean. - That the bottom of the dryer is free of dust. - That the drain hose is clean. If the above does not help, a mechanic should be called in.
The Bosch WTW87449SN has a weight of 55000 g.
The Bosch WTW87449SN has a height of 842 mm.
The Bosch WTW87449SN has a width of 598 mm.
The Bosch WTW87449SN has a depth of 652 mm.
The Bosch WTW87449SN has energy label A++.
Yes, the Bosch WTW87449SN is a freestanding dryer. This means that it can be placed anywhere in your home without the need for installation.
Yes, the Bosch WTW87449SN has a heat pump drying system. This system is more energy efficient compared to traditional dryers, as it recycles and reuses hot air, resulting in lower energy consumption.
Yes, the Bosch WTW87449SN has a self-cleaning feature. This allows the dryer to automatically clean the condenser, ensuring optimal performance and reducing maintenance for the user.
Yes, the Bosch WTW87449SN has a built-in display. The display is LED, providing clear and easy-to-read information about the drying process and settings.
The noise level of the Bosch WTW87449SN is 64 dB. This means that it operates at a relatively quiet level, providing a more peaceful and comfortable drying experience for the user.
The Bosch WTW87449SN dryer is intended for private domestic use only. It should not be installed or operated in areas that are prone to frost or outdoor conditions, as this can cause damage to the appliance. The dryer is specifically designed for drying and freshening up domestic laundry that has been washed with water and is suitable for tumble drying, as indicated by the item's label. Before using the dryer, it is important to check for any visible damage. If the appliance is damaged, do not operate it and contact your specialist dealer or customer service for assistance. Make sure to read and follow the operating and installation instructions provided with the appliance. Please note that the intended use of the Bosch WTW87449SN dryer does not include purposes other than drying and freshening up domestic laundry. It is also important to keep the appliance within the specified maximum height limit of 4000 meters above sea level. Ensure the safety of children and individuals with reduced physical, sensory, or mental capacity by supervising their use of the appliance and providing them with proper instructions on its safe usage. Children should not play with the appliance to avoid potential risks. For more detailed information and instructions, please refer to the manual.
If the Bosch WTW87449SN dryer is not starting or not responding when you try to use it, you can follow these steps to troubleshoot the issue: 1. Check the power supply: Ensure that the dryer is properly plugged into a functioning power outlet. Make sure the power cord is not damaged or kinked. If the dryer is connected to a power switch, ensure that it is turned on. 2. Check the door: Ensure that the dryer door is fully closed and latched. If the door is not closed properly, the dryer will not start. 3. Check the settings: Verify that you have selected the desired program and settings on the control panel. Make sure the program is compatible with the type of laundry you are drying. 4. Check for error messages: If there is an error message displayed on the control panel, refer to the manual for troubleshooting steps specific to that error code. 5. Reset the dryer: If none of the above steps resolve the issue, try resetting the dryer by turning it off, unplugging it from the power outlet, waiting for a few minutes, and then plugging it back in and turning it on again. If the problem persists after following these steps, it is recommended to contact the after-sales service for further assistance.
If the Bosch WTW87449SN dryer is not drying the laundry properly, you can troubleshoot the issue by following these steps: 1. Clean the fluff filter: A dirty fluff filter can cause longer drying times. Remove the filter and clean it thoroughly. Make sure to do this before every drying cycle. 2. Check the air inlet: Ensure that the air inlet on the dryer is not blocked and remains freely accessible. Blocked air inlet can increase drying time. Clear any obstructions to ensure proper airflow. 3. Optimum ambient temperature: The ideal ambient temperature for drying is between 15°C and 30°C. If the room temperature is outside this range, it may affect the drying performance. Adjust the room temperature if necessary. 4. Ensure proper ventilation: Insufficient air circulation in the room can also increase drying time. Make sure the room is well-ventilated to allow proper airflow. 5. Check for error messages: If there are any error messages displayed on the control panel, refer to the manual for specific troubleshooting steps related to the error code. 6. Consider fabric type and load size: Sort the laundry by fabric type and load size. Different fabrics may require different drying programs. Overloading the dryer can also affect drying performance, so make sure not to overload it. By following these troubleshooting steps, you should be able to address the issue of the Bosch WTW87449SN dryer not drying the laundry properly.
If the Bosch WTW87449SN dryer is not unloading the laundry or the door is not opening, you can follow these steps to troubleshoot the issue: 1. Pause the program: Press the Start button or open the dryer door to pause the program. 2. Add or remove laundry: Take this opportunity to add or remove laundry from the dryer as needed. 3. Select another program: If necessary, select a different program or additional function on the control panel. 4. Close the dryer door: Ensure that the dryer door is fully closed. 5. Press the Start button: Press the Start button to resume the drying cycle. If the door still does not open or the laundry is not unloading after following these steps, there may be a mechanical issue with the door lock mechanism. In this case, it is recommended to contact the after-sales service for further assistance. Remember to always follow safety precautions and avoid forcing the door open, as this may cause damage to the appliance.
If the Bosch WTW87449SN dryer is displaying an error message or not functioning correctly during a program, you can troubleshoot the issue by following these steps: 1. Check for error messages: Take note of any error messages displayed on the control panel. Refer to the manual for specific troubleshooting steps related to the error code. 2. Empty the condensate container: If the display shows a message related to the condensate container, empty it and ensure it is properly inserted back into the dryer. 3. Clean the fluff filter: A dirty fluff filter can affect the dryer's performance. Clean the fluff filter and ensure it is securely in place. 4. Check the air inlet: Make sure the air inlet on the dryer is not blocked and remains freely accessible. Blocked air inlet can affect drying performance. Clear any obstructions. 5. Adjust dryness level and program: If the laundry is not dried correctly or is still too damp, consider adjusting the dryness level or selecting a program with a longer drying time. 6. Restart the program: If the dryer has stopped functioning during a program, try turning it off and on again. Restart the program and monitor its performance. If the issue persists or if you encounter any other problems, it is recommended to contact the after-sales service for further assistance.
Yes, the manual of the Bosch WTW87449SN is available in English .
Is your question not listed? Ask your question here
No results
Need help?
Do you have a question about the Bosch and is the answer not in the manual?
Question and answer
Number of questions: 0