Bosch WAN22120AU manual

Bosch WAN22120AU
8.9 · 1
PDF manual
 · 37 pages
English
manualBosch WAN22120AU
en Instruction Manual and Installation Instructions
Washing machine
WAN...

View the manual for the Bosch WAN22120AU here, for free. This manual comes under the category washing machines and has been rated by 1 people with an average of a 8.9. This manual is available in the following languages: English. Do you have a question about the Bosch WAN22120AU or do you need help? Ask your question here

Need help?

Do you have a question about the Bosch and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 5
A
AnnetteJuly 28, 2021

I don't have the transporter bolts, but I need to move the washing machine. How can I do this without damaging the machine?

Z
Zhi junJune 5, 2023

Actually, I wanted to ask a simple question, because the specific 17 feature options really bothered me, and I didn't know exactly how to get me to choose the right option. Thank you

M
MICHAEL THOMPSONOctober 3, 2020

How to fix jammed filter on model wan22120au washing machine

L
Lyn BurtonMay 26, 2024

How do I get the temperature to go above 40 degrees?

S
Scott ParkerOctober 17, 2021

The control panel will not light up

General
BrandBosch
ModelWAN22120AU | WAN22120AU
Productwashing machine
LanguageEnglish
FiletypeUser manual (PDF), Datasheet (PDF)

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Bosch WAN22120AU below.

What temperature should I use for my laundry?

The washing label of your garment shows the recommended washing temperature.

Do I need to use an anti-scaling agent for my washing machine?

It is not necessary to use an anti-scaling agent. Scale deposits can be prevented by limiting washing at high temperatures and using the recommended amount of detergent per wash.

How do I prevent my washing machine from smelling?

Unpleasant odours can be avoided by occasionally washing at 60 degrees and using the recommended amount of detergent per wash.

What should I do if the Bosch WAN22120AU washing machine does not start when I press the power button?

If the Bosch WAN22120AU washing machine does not start when you press the power button, follow these steps: 1. Check the power supply: Ensure that the washing machine is properly plugged into a functioning power outlet. Check if there is power in the outlet by testing it with another device. 2. Check the door: Make sure that the door of the washing machine is fully closed and latched. The machine will not start if the door is not securely closed. 3. Check the water supply: Ensure that the water supply is turned on and that the water inlet hose is properly connected to the tap and the machine. If there is no water supply, the machine will not start. 4. Check the program selection: Make sure that you have selected the desired program and options. The machine will not start if no program is selected or if there are conflicting options. 5. Check the child lock: If the child lock function is activated, the machine will not start. Check the user manual for instructions on how to deactivate the child lock. If the issue persists after following these steps, it is recommended to contact Bosch customer service for further assistance.

How can I resolve the issue if the washing machine stops mid-cycle and displays an error code?

To resolve the issue if the Bosch WAN22120AU washing machine stops mid-cycle and displays an error code, follow these steps: 1. Check the display panel: Take note of the specific error code displayed on the panel. 2. Refer to the manual: Look for the corresponding error code in the manual to identify the cause of the issue. 3. Troubleshoot the cause: Follow the recommended troubleshooting steps provided in the manual for the specific error code. This may include actions such as waiting for the temperature to drop, opening and closing the door again, checking the water pressure, cleaning the drain pump or hose, adjusting the load balance, or deactivating the childproof lock. 4. Restart the machine: After troubleshooting, switch off the washing machine and then switch it on again. Set the program and options as desired. 5. Contact customer service: If the issue persists or if you are unable to resolve it on your own, it is recommended to contact Bosch customer service for further assistance. Note: The specific troubleshooting steps may vary depending on the error code displayed. Refer to the manual for the most accurate and detailed instructions.

What steps should I take if the washing machine is not draining the water properly?

To resolve the issue if the Bosch WAN22120AU washing machine is not draining the water properly, follow these steps: 1. Check the drain hose: Switch off the appliance and disconnect the mains plug. Loosen the hose clamp and carefully remove the drain hose. Clean the drain hose and the siphon connecting piece. Reattach the drain hose and secure the connection using the hose clamp. 2. Check the water supply filter: Turn off the tap and select any program (except Spin). Press the A button and allow the program to run for approximately 40 seconds. Turn the program selector to the off position and pull out the mains plug. Clean the filter on the tap by disconnecting the hose and using a small brush. Remove the hose from the rear of the appliance, use pliers to remove the filter, and clean it. Insert the filter, connect the hose, and check for leaks. If the issue persists after following these steps, it is recommended to contact Bosch customer service for further assistance.

How can I troubleshoot if the washing machine is not spinning the clothes dry at the end of the cycle?

To troubleshoot if the Bosch WAN22120AU washing machine is not spinning the clothes dry at the end of the cycle, follow these steps: 1. Check the load balance: Ensure that the laundry is evenly distributed inside the drum. If the load is unbalanced, the machine may not spin properly. Rearrange the clothes and redistribute the weight evenly. 2. Check the program selection: Make sure that you have selected the appropriate program for the type of laundry you are washing. Some programs have lower spin speeds, which may result in damp clothes. Select a program with a higher spin speed if necessary. 3. Check the drain filter: Switch off the appliance and disconnect the mains plug. Locate the drain filter at the bottom right of the machine. Open the filter cover and remove any debris or foreign objects that may be blocking the filter. Clean the filter and ensure it is securely tightened before closing the cover. 4. Check for excessive suds: If you have used too much detergent or the wrong type of detergent, excessive suds may prevent proper spinning. Use the recommended amount of detergent and ensure it is suitable for your machine. 5. Check for error codes: If the machine displays an error code, refer to the manual for troubleshooting steps specific to the code displayed. Follow the recommended actions to resolve the issue. If the issue persists after following these steps, it is recommended to contact Bosch customer service for further assistance.

What should I do if the washing machine is making unusual noises during operation?

If the Bosch WAN22120AU washing machine is making unusual noises during operation, follow these steps to troubleshoot the issue: 1. Check the appliance alignment: Ensure that the washing machine is properly aligned and level on the floor. Adjust the leveling feet if necessary to eliminate any wobbling or vibrations. 2. Remove transport bolts: If the washing machine was recently installed or moved, make sure that the transport bolts have been removed. These bolts are used to secure the drum during transportation and must be taken out before using the machine. 3. Check for foreign objects: Inspect the drum and the pump filter for any foreign objects such as coins, buttons, or small items that may be causing the noise. Remove any obstructions if found. 4. Reduce the load size: Overloading the washing machine can cause excessive noise during operation. Make sure not to exceed the maximum load capacity recommended in the manual and redistribute the laundry evenly inside the drum. 5. Contact customer service: If the unusual noises persist or if you are unable to identify the cause, it is recommended to contact Bosch customer service for further assistance. Note: These troubleshooting steps are general guidelines. For more specific instructions or if the issue persists, refer to the manual or contact customer service.

Is the manual of the Bosch WAN22120AU available in English?

Yes, the manual of the Bosch WAN22120AU is available in English .

Is your question not listed? Ask your question here

No results