Bosch WAK2020SME manual

Bosch WAK2020SME
6.5 · 1
PDF manual
 · 40 pages
English
manualBosch WAK2020SME
en Technical data
32
Spin efficiency class
The spin efficiency class of your
appliance can be seen on the energy
label. ~ Page 30
The percentage of residual moisture for
the spin efficiency class in question can
be seen in the following table.

J Technical data

Technical data
Dimensions:
850 x 600 x 590 mm
(Height x width x depth)
Weight
63-83 kg (depending on model)
Mains connection:
Mains voltage 220-240 V, 50 Hz
Nominal current 10 A
Nominal output 2300 W
Water pressure:
100-1000 kPa (1-10 bar)
Power consumption when switched off:
0.14 W
Power consumption when ready for use
(left-on mode):
1.37 W

5 Positioning and

connecting

Positioning and connecting
Included with the appliance
Note: Check the machine for transport
damage. Never use a damaged
machine. If you have a complaint,
please contact the retailer from whom
you purchased the appliance, or our
after-sales service.
Spin efficiency class Residual moisture D
in %
A (highest efficiency) D < 45
B 45 <= D < 54
C 54 <= D < 63
D 63 <= D < 72
E 72 <= D < 81
( Mains cable
0 Bag:
Installation and operating instructions
After-sales service location directory*
Warranty*
Cover caps for openings left after
removing the transport locks
Wrench*
8 Water supply hose on Aqua-Stop models
@ Water drain hose
#
+
3

Manual

View the manual for the Bosch WAK2020SME here, for free. This manual comes under the category washing machines and has been rated by 1 people with an average of a 6.5. This manual is available in the following languages: English. Do you have a question about the Bosch WAK2020SME or do you need help? Ask your question here

Index

Need help?

Do you have a question about the Bosch and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 1
H
HestieMay 26, 2021

My machine only beep when I press the start button. Why does it not started?

Bosch WAK2020SME specifications

Below you will find the product specifications and the manual specifications of the Bosch WAK2020SME.

General
BrandBosch
ModelWAK2020SME
Productwashing machine
LanguageEnglish
FiletypeUser manual (PDF)

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Bosch WAK2020SME below.

What temperature should I use for my laundry?

The washing label of your garment shows the recommended washing temperature.

Do I need to use an anti-scaling agent for my washing machine?

It is not necessary to use an anti-scaling agent. Scale deposits can be prevented by limiting washing at high temperatures and using the recommended amount of detergent per wash.

How do I prevent my washing machine from smelling?

Unpleasant odours can be avoided by occasionally washing at 60 degrees and using the recommended amount of detergent per wash.

How do I properly install the Bosch WAK2020SME washing machine?

To properly install the Bosch WAK2020SME washing machine, follow these steps: 1. Unpack the washing machine: Remove all packaging materials and accessories from the washing machine. 2. Level the machine: Place the washing machine on a flat and stable surface. Use a spirit level to ensure that it is level in all directions. Adjust the feet if necessary. 3. Connect the water supply: Connect the inlet hose to a water tap with a 3/4" thread. Make sure the connection is secure and there are no leaks. 4. Connect the drain hose: Connect the drain hose to a suitable drain or drainage system. Ensure that the hose is not kinked or blocked. 5. Plug in the power cord: Insert the power plug into a grounded electrical outlet. Make sure the voltage and frequency match the specifications on the rating plate of the washing machine. 6. Set up the detergent dispenser: Fill the detergent dispenser with the appropriate amount of detergent for your laundry load. Refer to the detergent manufacturer's instructions for guidance. 7. Start using the washing machine: Close the door of the washing machine and select the desired wash program and options. Press the Start button to begin the wash cycle. Remember to consult the Bosch WAK2020SME washing machine manual for any specific instructions or additional information.

What does the symbol on the display mean when it flashes during a wash cycle?

During a wash cycle, if a symbol on the display of the Bosch WAK2020SME washing machine is flashing, it indicates a specific condition or action. Here are the steps to understand the meaning of the flashing symbol: 1. Observe the flashing symbol: Take note of the specific symbol that is flashing on the display panel. 2. Refer to the manual: Consult the manual provided with the Bosch WAK2020SME washing machine to identify the meaning of the flashing symbol. The manual will have a section that explains the different symbols and their corresponding indications. 3. Find the symbol in the manual: Look for the symbol in the manual's section that describes the display symbols and their meanings. The manual will provide a detailed explanation of what the flashing symbol signifies during a wash cycle. 4. Follow the recommended action: Once you have identified the meaning of the flashing symbol, the manual will provide instructions on the recommended action to take. It may suggest troubleshooting steps or indicate if any intervention is required. Remember to refer to the Bosch WAK2020SME washing machine manual for accurate and specific information regarding the flashing symbols on the display panel.

How can I optimize the energy efficiency of the Bosch WAK2020SME washing machine?

To optimize the energy efficiency of the Bosch WAK2020SME washing machine, follow these steps: 1. Check the energy label: Locate the energy label on the side or front of the washing machine. The label provides information about the energy efficiency class and specific values of the appliance. 2. Fill the machine: Always fill the washing machine with the maximum amount of laundry for the relevant program. This helps to optimize energy usage and water consumption. 3. Skip the prewash: For normally soiled laundry, wash without a prewash. This saves energy and detergent. 4. Select appropriate programs: Choose the appropriate program for the type and level of soiling of your laundry. Washing lightly and normally soiled laundry can be done using energy-saving programs. 5. Activate energy-saving mode: When the washing machine is not in use, activate the energy-saving mode. This mode turns off the display panel lighting after a few minutes. Press any button to activate the lighting when needed. Note that energy-saving mode is not activated if a program is running. 6. Adjust spin speed: If you plan to dry the laundry in a tumble dryer, select the spin speed according to the tumble dryer manufacturer's instructions. By following these steps, you can optimize the energy efficiency of the Bosch WAK2020SME washing machine and contribute to energy conservation.

What are some tips for removing tough stains from clothes using the Bosch WAK2020SME washing machine?

To remove tough stains from clothes using the Bosch WAK2020SME washing machine, follow these tips: 1. Select the appropriate program: Choose a program that is suitable for the fabric and stain type. Refer to the program options in the manual for guidance. 2. Pre-treat the stain: Before placing the stained garment in the washing machine, pre-treat the stain using a stain remover or by applying a small amount of detergent directly to the stain. Gently rub the stain to help loosen it. 3. Load the machine correctly: Place the stained garment in the washing machine, making sure not to overload it. Leave enough space for the water and detergent to circulate effectively. 4. Use the right detergent: Select a detergent that is suitable for the fabric and stain. Follow the manufacturer's instructions for the recommended dosage. 5. Adjust the temperature: Choose the appropriate temperature setting for the fabric and stain. Higher temperatures are generally more effective for removing tough stains, but always check the care label of the garment for temperature limitations. 6. Start the wash cycle: Close the door of the washing machine and start the wash cycle according to the selected program. Allow the machine to complete the cycle. 7. Check the stain after washing: After the wash cycle is complete, check the stained area to see if the stain has been removed. If necessary, repeat the process or consider alternative stain removal methods. By following these tips, you can increase the chances of effectively removing tough stains from your clothes using the Bosch WAK2020SME washing machine.

What are the recommended maintenance steps for the Bosch WAK2020SME washing machine?

To maintain the Bosch WAK2020SME washing machine, follow these recommended steps: 1. Cleaning the machine: Wipe the housing and control panel with a soft, damp cloth. Remove detergent residue immediately and avoid cleaning with a water jet. Use chlorine-free cleaning agents and avoid using steel wool on the drum. 2. Descaling: Descaling should not be necessary if the detergent is measured correctly. However, if needed, follow the manufacturer's instructions for a suitable descaling agent. Avoid using cleaning agents that contain solvents. 3. Cleaning the detergent drawer and housing: Remove the detergent drawer and clean it with water and a brush. Dry it thoroughly. Clean the inside of the housing as well. Fit the insert back into the drawer and lock it in place. 4. Detergent solution pump: Turn off the water tap to stop the flow of water. Allow the water to cool down before handling. If the pump is blocked, seek professional assistance. By following these maintenance steps, you can ensure the proper functioning and longevity of your Bosch WAK2020SME washing machine.

How do I properly install the Bosch WAK2020SME washing machine?

To properly install the Bosch WAK2020SME washing machine, follow these steps: 1. Unpack the washing machine: Remove all packaging materials and accessories from the washing machine. 2. Level the machine: Place the washing machine on a flat and stable surface. Use a spirit level to ensure that it is level in all directions. Adjust the feet of the machine if necessary. 3. Connect the water supply: Connect the inlet hose to a water tap with a 3/4" thread. Make sure the connection is secure and there are no leaks. 4. Connect the drain hose: Connect the drain hose to a suitable drain pipe or standpipe. Ensure that the hose is not kinked or blocked. 5. Plug in the power cord: Insert the power plug into a grounded electrical outlet. Make sure the outlet is compatible with the voltage and frequency specified on the machine's rating plate. 6. Check the installation: Double-check all connections and make sure they are secure. Ensure that the water supply and drain hoses are properly connected. 7. Test the machine: Run a test cycle to ensure that the washing machine is functioning correctly. Follow the instructions in the user manual for the test cycle. By following these steps, you can properly install the Bosch WAK2020SME washing machine and start using it for your laundry needs.

What do the symbols and signal words in the manual of the Bosch WAK2020SME washing machine mean?

In the manual of the Bosch WAK2020SME washing machine, symbols and signal words are used to convey important information. Here is what they mean: 1. Warning symbol and signal word: This combination indicates a potentially dangerous situation. It is crucial to pay attention to these warnings as not heeding them can result in death or injuries. 2. Caution signal word: This signal word indicates a potentially dangerous situation. It is important to take caution as not heeding it can cause property and/or environmental damage. 3. Note/tip symbol and signal word: This provides information about the optimum use of the appliance or any other useful information. It offers tips and recommendations for getting the best results from your washing machine. 4. Numbered or lettered steps: These are represented by numbers or letters and guide you through specific procedures or processes. They help you follow a sequence of actions to achieve a desired outcome. 5. Lists: Lists in the manual are represented by small boxes or dashes. They provide organized information or instructions in a concise format. By understanding these symbols and signal words, you can effectively interpret the information provided in the manual of the Bosch WAK2020SME washing machine and ensure safe and optimal use of the appliance.

How do I access the lists in the manual of the Bosch WAK2020SME washing machine?

To access the lists in the manual of the Bosch WAK2020SME washing machine, follow these steps: 1. Navigate to the "Main points in brief" section: Look for a section titled "Main points in brief" in the manual. This section provides a concise summary of the key steps involved in using the washing machine. 2. Review the numbered steps: Within the "Main points in brief" section, you will find numbered steps that outline the essential actions to take when using the washing machine. These steps are typically presented in a clear and organized format. 3. Explore the "Getting to know the appliance" section: Another section to look for is the "Getting to know the appliance" section. This section provides an overview of the different parts and controls of the washing machine. 4. Locate the specific lists: Within the "Getting to know the appliance" section, you may find lists that provide information about specific features, functions, or components of the washing machine. These lists are typically labeled and easy to identify. By following these steps, you can access the lists in the manual of the Bosch WAK2020SME washing machine. These lists provide valuable information and guidance for using and understanding the various aspects of the appliance.

What are some tips for optimizing the use of the Bosch WAK2020SME washing machine?

To optimize the use of the Bosch WAK2020SME washing machine, consider the following tips: 1. Fill the appliance: Always fill the washing machine with the maximum amount of laundry for the relevant program. This helps to maximize efficiency and reduce water and energy consumption. 2. Skip the prewash: For normally soiled laundry, you can wash without a prewash. This saves time, energy, and detergent. 3. Wash lightly soiled laundry efficiently: When washing lightly and normally soiled laundry, you can save energy and detergent. Refer to page 12 of the manual for more information. 4. Activate energy-saving mode: The washing machine has an energy-saving mode where the display panel lighting goes out after a few minutes. To activate the lighting, simply press any button. Note that energy-saving mode is not activated if a program is running. 5. Adjust spin speed: If you plan to dry the laundry in a tumble dryer, select the spin speed according to the tumble dryer manufacturer's instructions. This ensures optimal drying results. By following these tips, you can optimize the use of the Bosch WAK2020SME washing machine, saving energy, water, and detergent while achieving excellent washing results.

Is the manual of the Bosch WAK2020SME available in English?

Yes, the manual of the Bosch WAK2020SME is available in English .

Is your question not listed? Ask your question here

No results