Bosch WAE282H0 manual

Bosch WAE282H0
8.2 · 3
PDF manual
 · 36 pages
English
manualBosch WAE282H0
en Instruction Manual and Installation Instructions

Washing machine

View the manual for the Bosch WAE282H0 here, for free. This manual comes under the category washing machines and has been rated by 3 people with an average of a 8.2. This manual is available in the following languages: English. Do you have a question about the Bosch WAE282H0 or do you need help? Ask your question here

Need help?

Do you have a question about the Bosch and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

The Bosch WAE282H0 is a washing machine with a rated capacity of 7 kg. It falls under the old energy efficiency class of A+++, making it energy efficient and environmentally friendly. The annual energy consumption for washing is 165 kWh, and it has a cold water fill option. This washing machine is equipped with a half-load feature, allowing users to wash smaller loads without wasting water and energy. The energy consumption per cycle for washing is 0.72 kWh. It has a low power consumption in standby mode, with only 1.9 W, and an even lower power consumption when turned off, at 0.2 W. In terms of water consumption, the Bosch WAE282H0 has an annual water consumption of 10,686 liters for washing. It has a spin-drying class of B, indicating an efficient spin-drying process. The washing class is rated as A. The washing machine also offers a delayed start timer, enabling users to program the machine to start at a later time. It includes an AquaStop function, providing protection against water damage by automatically shutting off the water supply if a leak is detected. For effective cleaning, the Bosch WAE282H0 has a maximum spin speed of 1400 RPM, ensuring efficient removal of dirt and stains. Its construction is designed for reliability and durability over time. In conclusion, the Bosch WAE282H0 is an energy-efficient washing machine with a capacity of 7 kg. It offers various features such as half-load, delayed start timer, and AquaStop function, making it a convenient choice for users. Its high spin speed contributes to effective cleaning, while its construction ensures longevity.

General
BrandBosch
ModelWAE282H0 | WAE282H0
Productwashing machine
EAN4242005027668
LanguageEnglish
FiletypeInstallation Guide (PDF)
Performance
Drum capacity7 kg
Half-loadYes
Spin-drying classB
Number of washing programs-
Delayed start timerYes
AquaStop functionYes
Maximum spin speed1400 RPM
Residual moisture53 %
Cycle time (max)215 min
Noise level (wash)56 dB
Noise level (spin)75 dB
Cycle time (quick washing program)15 min
Add garment (pause) functionYes
Rinse Plus functionYes
Rinse holdYes
Adjustable spin speedYes
Adjustable temperatureYes
Delay start (max)24 h
Foam control systemYes
Load balancing systemYes
Easy iron functionYes
Cold, Cotton, Easy care, Eco, Hand/wool, Hand, Wool, Mix, Quick, Delicate/silk
Power
A+++
Energy consumption washing per cycle0.72 kWh
Power consumption (standby)1.9 W
Power consumption (off)0.2 W
AC input frequency50 Hz
Connected load2300 W
AC input voltage220 - 240 V
Current10 A
Other features
Annual energy consumption washing165 kWh
Annual water consumption washing10686 L
Washing classA
Design
Water fillCold
Appliance placementFreestanding
Loading typeFront-load
Built-in displayYes
Display typeLED
Viewing windowYes
Door opening angle180 °
Door hingeLeft
CertificationCE, VDE
Cord length1.6 m
Product colorWhite
Tub materialPlastic
Drum volume55 L
Control typeRotary, Touch
Ergonomics
Remaining time indicationYes
Child lockYes
Drum interior lightNo
Adjustable feetYes
Feet adjustment15 mm
Weight & dimensions
Door diameter300 mm
Height848 mm
Width600 mm
Depth550 mm
Depth with door open990 mm
Weight67500 g
show more

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Bosch WAE282H0 below.

What temperature should I use for my laundry?

The washing label of your garment shows the recommended washing temperature.

Do I need to use an anti-scaling agent for my washing machine?

It is not necessary to use an anti-scaling agent. Scale deposits can be prevented by limiting washing at high temperatures and using the recommended amount of detergent per wash.

How do I prevent my washing machine from smelling?

Unpleasant odours can be avoided by occasionally washing at 60 degrees and using the recommended amount of detergent per wash.

What is the weight of the Bosch WAE282H0?

The Bosch WAE282H0 has a weight of 67500 g.

What certifications does the Bosch WAE282H0 have?

The Bosch WAE282H0 has the following certifications: CE, VDE.

What is the height of the Bosch WAE282H0?

The Bosch WAE282H0 has a height of 848 mm.

What is the width of the Bosch WAE282H0?

The Bosch WAE282H0 has a width of 600 mm.

What is the depth of the Bosch WAE282H0?

The Bosch WAE282H0 has a depth of 550 mm.

What is the rated capacity of the Bosch WAE282H0?

The rated capacity of the Bosch WAE282H0 is 7 kg. This means that it can handle a laundry load of up to 7 kilograms.

Is the Bosch WAE282H0 energy efficient?

Yes, the Bosch WAE282H0 has an energy efficiency class of A+++. This means that it is highly energy efficient compared to other washing machines on the market.

Does the Bosch WAE282H0 have a half-load feature?

Yes, the Bosch WAE282H0 has a half-load feature. This means that it can adjust the water and energy consumption according to the size of the load, saving resources when washing smaller loads.

How much power does the Bosch WAE282H0 consume in standby mode?

The Bosch WAE282H0 consumes 1.9 W in standby mode. While this is not the lowest power consumption among washing machines, it is relatively low and can help reduce overall energy usage.

What is the maximum spin speed of the Bosch WAE282H0?

The Bosch WAE282H0 has a maximum spin speed of 1400 RPM. This high spin speed helps to reduce the drying time of the clothes, saving time and electricity.

How do I properly clean the housing and control panel of the Bosch WAE282H0 washing machine?

To properly clean the housing and control panel of the Bosch WAE282H0 washing machine, follow these steps: 1. Start by unplugging the washing machine from the power source to ensure safety. 2. Use a soft, damp cloth to wipe the exterior surfaces of the housing and control panel. Avoid using abrasive cleaners or solvents that may damage the finish. 3. Pay special attention to any stains or spills on the control panel. Gently wipe them away using a mild detergent solution or a non-abrasive cleaner specifically designed for electronic surfaces. 4. For hard-to-reach areas, such as the gaps between buttons or knobs, use a soft-bristled brush or a cotton swab dipped in the cleaning solution to remove any dirt or grime. 5. Once you have cleaned all the surfaces, use a dry cloth to wipe away any excess moisture and ensure everything is completely dry. 6. Finally, plug the washing machine back into the power source and verify that the control panel is functioning properly. Remember to always follow the manufacturer's instructions and safety guidelines when cleaning your Bosch WAE282H0 washing machine.

Why is the washing machine not detecting the load size automatically?

The Bosch WAE282H0 washing machine may not be detecting the load size automatically due to the following reasons: 1. Incorrect placement of laundry: Ensure that the laundry is properly placed in the washing drum and that no items are trapped between the washing machine door and the rubber seal. This can interfere with the load detection process. 2. Overfilling the drum: Avoid overfilling the drum as it can adversely affect the washing result and encourage creasing. Observe the maximum indicated load capacity to ensure accurate load detection. 3. Unbalanced load: If the laundry is extremely unevenly distributed in the drum, the washing machine's automatic unbalanced load detection system may detect imbalances and prevent the load size from being detected. Make sure to distribute the laundry evenly in the drum. To resolve the issue, follow these steps: 1. Properly unfold and sort the laundry before placing it in the washing drum. 2. Ensure that no items of laundry are trapped between the door and the rubber seal, and close the door securely. 3. Avoid overfilling the drum and follow the maximum load capacity guidelines. 4. Distribute the laundry evenly in the drum to prevent imbalances. By following these steps, you should be able to ensure that the Bosch WAE282H0 washing machine detects the load size automatically.

How do I clean the drum of the Bosch WAE282H0 washing machine?

To clean the drum of the Bosch WAE282H0 washing machine, follow these steps: 1. Start by unplugging the washing machine from the power source for safety. 2. Wipe the inside of the rubber seal dry with a cloth to remove any moisture or residue. 3. Leave the washing machine door open after each use to allow the drum to dry thoroughly. 4. Use chlorine-free cleaning agents to clean the drum. Avoid using steel wool or abrasive cleaners that can damage the surfaces. 5. Do not use a water jet or spray directly onto the drum for cleaning. By following these steps, you can effectively clean the drum of the Bosch WAE282H0 washing machine. Remember to always use appropriate cleaning agents and avoid abrasive materials to prevent damage to the drum and ensure optimal performance.

Why is it important to leave the washing machine door and detergent drawer open after use?

It is important to leave the washing machine door and detergent drawer open after use for the following reasons: 1. Preventing odor and mildew: Leaving the door and detergent drawer open allows air to circulate inside the washing machine, preventing the buildup of moisture. This helps to reduce the risk of unpleasant odors and the growth of mildew. 2. Allowing the drum to dry: By leaving the door open, the drum can dry out completely. This helps to prevent the growth of bacteria and mold, which can thrive in damp environments. 3. Avoiding damage to the rubber seal: Closing the door immediately after use can cause moisture to become trapped between the door and the rubber seal. Over time, this can lead to the deterioration of the seal and potential leaks. 4. Maintaining cleanliness: Leaving the detergent drawer open allows any remaining detergent or residue to dry out, preventing the buildup of sticky or moldy substances. By following these steps and leaving the washing machine door and detergent drawer open after use, you can help maintain a clean and odor-free Bosch WAE282H0 washing machine.

What cleaning agents should I use to clean the rubber seal of the washing machine?

To clean the rubber seal of the Bosch WAE282H0 washing machine, follow these steps: 1. Use water and a soft, damp cloth to clean the rubber seal. Avoid using cleaning agents that contain solvents, as they may emit poisonous fumes. 2. Remove any detergent, spray, or other residues from the rubber seal immediately to prevent damage. 3. Do not allow cleaning agents or agents for pretreating laundry to come into contact with the surfaces of the washing machine. These agents may cause damage to the appliance. 4. Clean the rubber seal with water and a soft, damp cloth only. Avoid using abrasive materials or cleaners that may cause material damage. By following these steps, you can effectively clean the rubber seal of the Bosch WAE282H0 washing machine and maintain its performance and longevity. Remember to always use gentle cleaning methods and avoid harsh chemicals to protect the rubber seal and prevent any potential damage.

Is the manual of the Bosch WAE282H0 available in English?

Yes, the manual of the Bosch WAE282H0 is available in English .

Is your question not listed? Ask your question here

No results