View the manual for the Bosch UniversalLevel 3 here, for free. This manual comes under the category laser levels and has been rated by 1 people with an average of a 7.5. This manual is available in the following languages: English. Do you have a question about the Bosch UniversalLevel 3 or do you need help? Ask your question here

The Bosch UniversalLevel 3 is a laser level that supports tripod mounting with a 1/4" thread. It has a maximum range of 10 meters and belongs to laser class 2. The laser beam is red in color and can be emitted horizontally or vertically, allowing for versatile usage. The self-levelling range is ±3°, providing precision leveling capabilities. With a levelling accuracy of ±0.5 mm/m, it ensures accurate measurements in various applications. Weighing 540 grams, the Bosch UniversalLevel 3 is lightweight and portable, making it convenient to carry around. It operates using 1.5V AA batteries, offering a battery voltage suitable for extended usage. Designed as a line/point level, it offers flexibility in meeting different leveling needs. Equipped with a 650 nm (<1mW) laser diode, the Bosch UniversalLevel 3 provides a visible red laser beam for easy reference. Its operating time is approximately 5 hours, providing sufficient battery life for most projects. Overall, the Bosch UniversalLevel 3 is a reliable laser level that offers precise leveling capabilities. It is designed with portability in mind, making it suitable for various applications. With its red laser beam, tripod mounting support, and accurate leveling, it provides a user-friendly experience for individuals seeking a versatile and high-performing laser level. Its construction ensures durability and long-lasting performance, which is essential for professionals or DIY enthusiasts who rely on accurate measurements.
| Brand | Bosch |
| Model | UniversalLevel 3 | 0 603 663 900 |
| Product | laser level |
| EAN | 3165140898379 |
| Language | English |
| Filetype | User manual (PDF) |
| Tripod mounting supported | Yes |
| Tripod thread | 1/4 " |
| Type | Line/Point level |
| Product color | Black, Green |
| Maximum range | 10 m |
| Laser class | 2 |
| Color of laser beam | Red |
| Beam direction | Horizontal/Vertical |
| Self-leveling range (±) | 3 ° |
| Leveling accuracy (±) | 0.5 mm/m |
| Laser diode | 650 nm (<1 mW) |
| Weight | 540 g |
| Depth | 131 mm |
| Width | 75 mm |
| Height | 126 mm |
| Battery voltage | 1.5 V |
| Battery type | AA |
| Operating time | 5 h |
| Number of batteries supported | 3 |
| Operating temperature (T-T) | 5 - 40 °C |
| Storage temperature (T-T) | -20 - 70 °C |
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Bosch UniversalLevel 3 below.
The Bosch UniversalLevel 3 has a weight of 540 g.
The Bosch UniversalLevel 3 has a height of 126 mm.
The Bosch UniversalLevel 3 has a width of 75 mm.
The Bosch UniversalLevel 3 has a depth of 131 mm.
Yes, it supports tripod mounting. This means that users can easily set up the laser level on a stable tripod for precise measurements and leveling.
The maximum range of the Bosch UniversalLevel 3 is 10 meters. This allows for accurate leveling and alignment over a decent distance.
The self-levelling range of the Bosch UniversalLevel 3 is ±3 degrees. This means that the laser level can automatically adjust itself within this range to ensure accurate leveling.
The levelling accuracy of the Bosch UniversalLevel 3 is ±0.5 mm/m. This indicates that the laser level provides a high level of precision in its leveling measurements.
The operating time of the Bosch UniversalLevel 3 is 5 hours. This allows for extended use without the need for frequent battery replacements.
To troubleshoot if the laser lines of the Bosch UniversalLevel 3 laser level are not visible or are faint, follow these steps: 1. Check the battery: Ensure that the battery is fully charged or replace it with a new one if necessary. A low battery can affect the visibility of the laser lines. 2. Clean the laser lens: Use a soft, lint-free cloth to clean the laser lens. Dust or debris on the lens can obstruct the laser beam and make the lines appear faint or invisible. 3. Adjust the brightness: Some laser levels have adjustable brightness settings. Check if your Bosch UniversalLevel 3 laser level has this feature and adjust the brightness to a higher level if needed. 4. Check the working range: Make sure that you are within the specified working range of the laser level. If you are too far away, the laser lines may become faint or not visible at all. 5. Use a target plate: If you are working in bright or outdoor environments, use a target plate to enhance the visibility of the laser lines. The target plate reflects the laser beam back to the laser level, making the lines more visible. By following these troubleshooting steps, you should be able to address the issue of faint or invisible laser lines on the Bosch UniversalLevel 3 laser level.
If the Bosch UniversalLevel 3 laser level does not self-level properly, you can try the following steps to troubleshoot the issue: 1. Check the surface: Ensure that the surface on which you are placing the laser level is level and stable. Uneven or unstable surfaces can affect the self-leveling function. 2. Clean the leveling base: Remove any dirt, debris, or obstructions from the leveling base of the laser level. A clean and clear base ensures proper contact with the surface for accurate self-leveling. 3. Check the leveling range: Make sure that the surface deviation does not exceed the self-leveling range of ±4°. If the surface deviation is beyond this range, the laser level may not be able to self-level properly. 4. Calibrate the laser level: Some laser levels have a calibration feature that allows you to manually adjust the leveling mechanism. Refer to the user manual for instructions on how to calibrate your Bosch UniversalLevel 3 laser level. 5. Reset the laser level: If all else fails, try resetting the laser level to its factory settings. This can help resolve any software or internal issues that may be affecting the self-leveling function. By following these troubleshooting steps, you should be able to address the issue of the Bosch UniversalLevel 3 laser level not self-leveling properly.
To troubleshoot if the laser point or laser line of the Bosch UniversalLevel 3 laser level is not accurate, follow these steps: 1. Check the surface: Ensure that the surface on which you are using the laser level is clean, flat, and free from any obstructions. Uneven or rough surfaces can affect the accuracy of the laser point or line. 2. Adjust the leveling: Make sure that the laser level is properly leveled. Use the self-leveling function or manually adjust the leveling mechanism according to the instructions in the user manual. 3. Check the distance: Ensure that you are within the working range of the laser level. If you are too far away from the surface, the laser point or line may appear less accurate. 4. Calibrate the laser level: Some laser levels have a calibration feature that allows you to fine-tune the accuracy. Refer to the user manual for instructions on how to calibrate your Bosch UniversalLevel 3 laser level. 5. Use a target plate: If you are working in bright or outdoor environments, use a target plate to enhance the visibility and accuracy of the laser point or line. The target plate reflects the laser beam back to the laser level, improving accuracy. By following these troubleshooting steps, you should be able to address any issues with the accuracy of the laser point or laser line on the Bosch UniversalLevel 3 laser level.
To troubleshoot if the Bosch UniversalLevel 3 laser level does not turn on or does not operate properly, follow these steps: 1. Check the battery: Ensure that the battery is fully charged or replace it with a new one if necessary. A low or faulty battery can prevent the laser level from turning on or operating properly. 2. Verify the power switch: Make sure that the power switch is in the "On" position. If the switch is in the "Off" position, the laser level will not turn on. 3. Clean the battery contacts: Remove the battery and clean the battery contacts with a dry cloth or a soft brush. Dirty or corroded contacts can interfere with the power supply. 4. Check the battery compartment: Inspect the battery compartment for any debris or damage. Ensure that the batteries are inserted correctly and that the compartment is securely closed. 5. Reset the laser level: If the laser level is not responding, try resetting it by removing the batteries, waiting for a few seconds, and then reinserting the batteries. By following these troubleshooting steps, you should be able to address the issue of the Bosch UniversalLevel 3 laser level not turning on or not operating properly.
To troubleshoot if the laser lines of the Bosch UniversalLevel 3 laser level are not perpendicular in cross-line operation, follow these steps: 1. Check the leveling: Ensure that the laser level is properly leveled. Use the self-leveling function or manually adjust the leveling mechanism according to the instructions in the user manual. 2. Verify the surface: Make sure that the surface on which you are using the laser level is level and flat. Uneven or sloping surfaces can cause the laser lines to be non-perpendicular. 3. Adjust the position: If the laser lines are not perpendicular, try repositioning the laser level. Place it on a different spot on the surface and check if the lines become perpendicular. 4. Check the distance: Ensure that you are within the recommended working distance for cross-line operation. If you are too far away or too close to the surface, the laser lines may not be perpendicular. 5. Calibrate the laser level: Some laser levels have a calibration feature that allows you to fine-tune the alignment of the laser lines. Refer to the user manual for instructions on how to calibrate your Bosch UniversalLevel 3 laser level. By following these troubleshooting steps, you should be able to address the issue of non-perpendicular laser lines in cross-line operation with the Bosch UniversalLevel 3 laser level.
To check the levelling accuracy of the Bosch UniversalLevel 3 laser level, follow these steps: 1. Ensure that the laser level is placed on a stable surface or mounted securely on a tripod. 2. Switch on the laser level and allow it to self-level. 3. Once the laser lines or laser point are projected, observe their position and alignment. 4. Use a measuring tape or ruler to measure the distance between the laser line or laser point and a reference point on a wall or surface. 5. Compare the measured distance with the expected distance. The levelling accuracy is determined by the difference between the measured and expected distances. 6. Repeat the measurement at different distances and angles to ensure consistent levelling accuracy. 7. If the measured distances deviate significantly from the expected distances, the levelling accuracy may be compromised. In such cases, refer to the troubleshooting section of the manual or contact Bosch customer support for further assistance. By following these steps, you can check the levelling accuracy of the Bosch UniversalLevel 3 laser level and ensure precise and accurate measurements.
If the laser lines of the Bosch UniversalLevel 3 laser level are not visible or are faint, you can try the following steps to troubleshoot the issue: 1. Check the battery level: Ensure that the batteries are properly inserted and have sufficient charge. Replace the batteries if necessary. 2. Clean the laser lens: Use a soft, lint-free cloth to clean the laser lens. Remove any dirt, dust, or debris that may be obstructing the laser beam. 3. Adjust the brightness settings: Some laser levels have adjustable brightness settings. Check the user manual to see if your model has this feature and adjust the brightness if needed. 4. Check the operating temperature: Extreme temperatures can affect the visibility of the laser lines. Make sure you are operating the laser level within the recommended temperature range. 5. Verify the distance: The visibility of the laser lines may vary depending on the distance between the laser level and the target surface. Ensure that you are within the specified working range of the laser level. If the issue persists after trying these steps, refer to the troubleshooting section of the manual or contact Bosch customer support for further assistance.
To ensure that the laser point or laser line of the Bosch UniversalLevel 3 laser level is aligned correctly with your desired reference point, follow these steps: 1. Position the laser level on a stable surface or mount it securely on a tripod. 2. Switch on the laser level and allow it to self-level. 3. Once the laser lines or laser point are projected, visually align them with your desired reference point on the target surface. 4. Use the built-in leveling indicators or bubble vials on the laser level to ensure that it is positioned correctly. 5. Adjust the position of the laser level if needed to align the laser lines or laser point precisely with your reference point. 6. Double-check the alignment by measuring the distance between the laser line or laser point and the reference point using a measuring tape or ruler. 7. Make any necessary adjustments to the position of the laser level until the alignment is accurate. 8. Once the laser level is aligned correctly, you can use it for various applications such as marking, leveling, or aligning objects. By following these steps, you can ensure that the laser point or laser line of the Bosch UniversalLevel 3 laser level is aligned accurately with your desired reference point, allowing you to achieve precise measurements and alignments in your projects.
To ensure that the laser lines of the Bosch UniversalLevel 3 laser level are perpendicular to each other in cross-line operation, follow these steps: 1. Position the laser level on a stable surface or mount it securely on a tripod. 2. Switch on the laser level and allow it to self-level. 3. Once the laser lines are projected, visually check their alignment. 4. If the laser lines are not perpendicular to each other, adjust the position of the laser level. 5. Rotate the laser level slightly until the laser lines form a perfect right angle. 6. Use a leveling indicator or bubble vial on the laser level to verify the perpendicular alignment. 7. Fine-tune the position of the laser level if necessary to achieve the desired perpendicularity. 8. Once the laser lines are perpendicular to each other, you can use them for various applications such as marking right angles or aligning objects. By following these steps, you can ensure that the laser lines of the Bosch UniversalLevel 3 laser level are correctly aligned and perpendicular to each other in cross-line operation, allowing you to achieve accurate measurements and alignments in your projects.
To properly attach the Bosch UniversalLevel 3 laser level to a tripod, follow these steps: 1. Ensure that the tripod is set up on a stable surface. 2. Locate the tripod mount on the bottom of the laser level. 3. Align the tripod mount with the 1/4" male thread on the tripod. 4. Place the laser level onto the tripod mount. 5. Rotate the laser level clockwise to engage the locking mechanism. 6. Tighten the locking screw on the tripod to secure the laser level in place. 7. Adjust the tripod height and position as needed to achieve the desired measurement or alignment angle. 8. Once the laser level is securely attached to the tripod, you can switch it on and use it for your measurement or alignment tasks. By following these steps, you can properly attach the Bosch UniversalLevel 3 laser level to a tripod, ensuring stability and accuracy in your measurements and alignments.
Yes, the manual of the Bosch UniversalLevel 3 is available in English .
Is your question not listed? Ask your question here
No results
Need help?
Do you have a question about the Bosch and is the answer not in the manual?
Question and answer
Number of questions: 0