View the manual for the Bosch UniversalImpact 700 here, for free. This manual comes under the category drill machines and has been rated by 7 people with an average of a 8. This manual is available in the following languages: English. Do you have a question about the Bosch UniversalImpact 700 or do you need help? Ask your question here

The Bosch UniversalImpact 700 is a drill machine with a maximum output power of 530 W. It has an input power of 701 W and a maximum torque of 17 N·m. With a maximum idle speed of 3000 RPM, this drill machine allows for efficient drilling and screwing. The adjustable speed feature enables users to customize the speed based on the task at hand. To provide added stability and control, the Bosch UniversalImpact 700 comes with an auxiliary handle. When it comes to drilling capacities, this drill machine can handle a maximum drilling diameter of 14 mm in concrete, 30 mm in wood, and 12 mm in steel. It can also handle screws with a maximum diameter of 5 mm. With a weight of 1700 g, the Bosch UniversalImpact 700 is lightweight and therefore easy to handle. It is equipped with a 2.5 m long cable, providing flexibility during operation. In terms of vibration levels, the metal drilling function of this drill machine has a vibration level of 10 m/s², with an uncertainty of 2.5 m/s². Another convenient feature of the Bosch UniversalImpact 700 is its ability to work in reverse. This allows for easy removal of screws or changing the direction of drilling. Overall, the Bosch UniversalImpact 700 is a reliable and durable drill machine. It offers a range of drilling capacities and features, making it suitable for various drilling and screwing tasks.
| Brand | Bosch |
| Model | UniversalImpact 700 | 0 603 131 000 |
| Product | drill machine |
| EAN | 3165140840774 |
| Language | English |
| Filetype | User manual (PDF) |
| Output power | 530 W |
| Input power | 701 W |
| Cable length | 2.5 m |
| Power source | AC |
| AC input voltage | 230 V |
| Torque (max) | 17 N⋅m |
| Idle speed (max) | 3000 RPM |
| Drilling diameter in concrete (max) | 14 mm |
| Drilling diameter in wood (max) | 30 mm |
| Drilling diameter in steel (max) | 12 mm |
| Screw diameter (max) | 5 mm |
| Vibration level (metal drilling) | 10 m/s² |
| Impact rate (high speed) | 45000 bpm |
| Sound power level | 108 dB |
| Sound pressure level | 97 dB |
| Vibration level uncertainty (metal drilling) | 2.5 m/s² |
| Vibration level (screwdriving) | 2.5 m/s² |
| Vibration level uncertainty (screwdriving) | 1.5 m/s² |
| Adjustable speed | Yes |
| Reverse | Yes |
| Soft grip | Yes |
| Chuck type | Keyless |
| Hammer drilling | Yes |
| Drilling | Yes |
| Product design | Pistol grip drill |
| Screwdriving | Yes |
| Built-in light | - |
| Adjustable torque | - |
| Protection class | II |
| Auxiliary handle | Yes |
| Carrying case | Yes |
| Weight | 1700 g |
| Uncertainty K | 2.5 m/s² |
| Product color | Black, Green |
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Bosch UniversalImpact 700 below.
1. Soak the rusty part in vinegar until completely soaked through. 2. Let the vinegar work on the rust for 24 hours. 3. Remove the rust with a wire brush or aluminium foil.
The maximum achievable charge level is expressed with 16V or 20V. The V in this case stands for Volt.
The amount of sound varies a lot per brand and type of drill machine, it is therefore wise to wear hearing protection to be sure.
The Bosch UniversalImpact 700 has a weight of 1700 g.
To change the drill bit, locate the chuck on the front of the machine. Hold the chuck firmly and rotate it counterclockwise to loosen it. Once loose, remove the current drill bit and insert the new one. Tighten the chuck by rotating it clockwise until it is secure.
The maximum drilling capacity of the Bosch UniversalImpact 700 is 14 millimeters in steel, 30 millimeters in wood, and 12 millimeters in masonry.
To adjust the speed of the drill, locate the speed control switch near the trigger. Slide the switch to the desired speed, either "1" for low speed or "2" for high speed, depending on the material you are drilling.
Yes, the drill machine can also be used for screwdriving. To switch to screwdriving mode, locate the mode selector switch on top of the machine. Slide the switch to the screwdriving icon. Remember to adjust the speed depending on the type of screw and material you are working with.
When drilling into different materials, it is important to select the correct drill bit and adjust the drilling speed accordingly. For example, choose a masonry bit for drilling into concrete or stone, a wood bit for drilling into wood, and a metal bit for drilling into metal surfaces. Ensure that the drill is perpendicular to the material and apply steady pressure while drilling.
Yes, the Bosch UniversalImpact 700 has an adjustable speed. This allows the user to control the speed of drilling according to their requirements.
The maximum drilling diameter in concrete for the Bosch UniversalImpact 700 is 14 mm. This makes it suitable for a range of drilling tasks in concrete surfaces.
Yes, the Bosch UniversalImpact 700 has a reverse function. This is useful for unscrewing or removing screws or other fasteners.
The maximum drilling diameter in wood for the Bosch UniversalImpact 700 is 30 mm. This allows for larger and more versatile drilling tasks in wooden surfaces.
Yes, the Bosch UniversalImpact 700 has a soft grip. This provides the user with a comfortable and ergonomic grip, reducing fatigue during extended use.
Yes, the manual of the Bosch UniversalImpact 700 is available in English .
Is your question not listed? Ask your question here
No results
Need help?
Do you have a question about the Bosch and is the answer not in the manual?
Question and answer
Number of questions: 5How come my drill just sticks in the wall when I drill? I don't know how to handle that Lock.
How do I use it as a screwdriver? Is there a slower setting? As it is, it is too fast and I can't control the screwing
Hello It seems my drail tool stucked in drail machin. Universal impact 700. How i should remove it
does this drill have attachments that you can buy to clean tiles
used first time, can't remove bit
1 comment
I'm having the same problem