View the manual for the Bosch UniversalChain 40 here, for free. This manual comes under the category saws and has been rated by 4 people with an average of a 8.2. This manual is available in the following languages: English. Do you have a question about the Bosch UniversalChain 40 or do you need help? Ask your question here

The Bosch UniversalChain 40 is a saw that operates on an alternating current power source, providing a power output of 1800 watts. With a chain speed of 12 meters per second, it enables efficient cutting performance. The saw is equipped with an SDS (Special Direct System) system, allowing for quick and easy chain tensioning and changing without the need for additional tools. Weighing 4200 grams, this saw is designed with an ergonomic handle to ensure comfortable and controlled usage. It features a blade length of 400 millimeters, enabling a cutting length of 350 millimeters. The drive link thickness measures 1.1 millimeters, contributing to precise cutting results. The saw's vibration emission is 4 meters per second squared, while the sound pressure level is 94 decibels and the sound power level is 102 decibels. The standard deviation for the sound power level is 2 decibels, ensuring consistent acoustic performance. Overall, the Bosch UniversalChain 40 is engineered to provide reliable and durable performance. It is designed to meet the needs of users who require a powerful and efficient saw for various cutting tasks.
| Brand | Bosch |
| Model | UniversalChain 40 | 0 600 8B8 400 |
| Product | saw |
| EAN | 3165140938914 |
| Language | English |
| Filetype | User manual (PDF) |
| Power source | AC |
| Power | 1800 W |
| Chain speed | 12 m/s |
| SDS system | Yes |
| Ergonomic handle | Yes |
| Product color | Black, Green |
| Blade length | 400 mm |
| Cutting length | 350 mm |
| Drive link thickness | 1.1 mm |
| Automatic oiling | Yes |
| Quick stop function | Yes |
| Soft grip | Yes |
| Idle speed | - RPM |
| Weight | 4200 g |
| Uncertainty K | 1.5 m/s² |
| Vibration emission | 4 m/s² |
| Sound pressure level | 94 dB |
| Sound power level | 102 dB |
| Standard deviation | 2 dB |
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Bosch UniversalChain 40 below.
The Bosch UniversalChain 40 has a weight of 4200 g.
1. Wipe sawdust from the saw blade with a brush. 2. Spray the saw blade with oven cleaner and leave for 30 minutes. 3. Remove the oven cleaner and dirt with a dry cloth. 4. Grease saw blade with Vaseline.
If there is resin or other debris on the blade, it may look like the blade is blunt. If the saw blade has been thoroughly cleaned and is still blunt, it is recommended to have the saw blade sharpened.
1. Soak the rusty part in vinegar until completely soaked through. 2. Let the vinegar work on the rust for 24 hours. 3. Remove the rust with a wire brush or aluminium foil.
The maximum achievable charge level is expressed with 16V or 20V. The V in this case stands for Volt.
The amount of sound varies a lot per brand and type of saw, it is therefore wise to wear hearing protection to be sure.
Ensure the chain teeth are facing the correct direction, then carefully align and properly tighten the chain onto the guide bar.
The maximum cutting depth of this chainsaw is 40 centimeters (cm) or 16 inches.
Locate the chain tensioning knob, typically positioned on the side of the saw body, and gradually rotate it to achieve the desired chain tension.
It is recommended to always use bar and chain oil specifically designed for chainsaws to ensure optimal lubrication and prolong the lifespan of the chain.
Before starting, ensure the chainsaw is on a secure and stable surface. To start, firmly press the trigger lock and squeeze the throttle trigger. To stop, release the throttle trigger and disconnect the power source by unplugging the saw or removing the battery pack.
Yes, Bosch UniversalChain 40 has an ergonomic handle. This means that it is designed to be comfortable and easy to use, reducing strain on the user's hand and arm.
Yes, Bosch UniversalChain 40 has automatic oiling. This feature ensures that the chain is properly lubricated during operation, improving its performance and longevity.
Yes, the chain speed of Bosch UniversalChain 40 is 12 m/s. This is a relatively high chain speed, allowing for efficient and fast cutting.
Yes, Bosch UniversalChain 40 has a quick stop function. This means that the chain will stop moving almost instantly when the trigger is released, enhancing safety during operation.
The power source of Bosch UniversalChain 40 is AC. This means that it needs to be connected to a power outlet to operate.
Yes, the manual of the Bosch UniversalChain 40 is available in English .
Is your question not listed? Ask your question here
No results
Need help?
Do you have a question about the Bosch and is the answer not in the manual?
Question and answer
Number of questions: 0