View the manual for the Bosch UniversalAquatak 135 here, for free. This manual comes under the category pressure washers and has been rated by 10 people with an average of a 8.9. This manual is available in the following languages: English. Do you have a question about the Bosch UniversalAquatak 135 or do you need help? Ask your question here

The Bosch UniversalAquatak 135 is a compact electric pressure washer with a power consumption of 1900 W. It weighs 7900 g, making it relatively lightweight and easy to maneuver. The pressure washer has a hose with a length of 7 meters, providing a decent reach for various cleaning tasks. With a maximum flow rate of 410 liters per hour, the Bosch UniversalAquatak 135 offers efficient and effective cleaning power. It comes equipped with a special nozzle and a lance, allowing for versatility in tackling different types of dirt and grime. Convenience is a key feature of this pressure washer, as it includes accessory storage for easy organization and accessibility. It also has a water filter, ensuring that impurities do not clog the system during operation. The maximum working pressure of the Bosch UniversalAquatak 135 is 135 bar, which provides sufficient force for most cleaning needs. The pressure washer can handle a maximum water temperature of 40 °C, enabling it to effectively tackle tough stains or dirt that require hot water cleaning. It comes with a 5-meter long cable for flexibility in reaching various power sources during use. In summary, the Bosch UniversalAquatak 135 is a compact, electric pressure washer with a range of features designed to enhance cleaning performance. With its powerful motor, it offers efficient and reliable cleaning power. Its lightweight design and long hose provide convenience and versatility, while features such as accessory storage and a water filter add to its overall functionality.
| Brand | Bosch |
| Model | UniversalAquatak 135 | 0 600 8A7 C00 |
| Product | pressure washer |
| EAN | 3165140883795 |
| Language | English |
| Filetype | User manual (PDF) |
| Power consumption (typical) | 1900 W |
| Form factor | Compact |
| Power source | Electric |
| Hose length | 7 m |
| Product color | Black, Green |
| Water filter | Yes |
| Pressure range | High-pressure |
| Cable length | 5 m |
| Detergent tank | Yes |
| Tank capacity | 0.45 L |
| Weight | 7900 g |
| Maximum flow rate | 410 l/h |
| Working pressure (max) | 135 bar |
| Maximum water temperature | 40 °C |
| Vibration emission | 1.3 m/s² |
| Uncertainty K | 0.6 m/s² |
| Special nozzle | Yes |
| Lance included | Yes |
| Accessory storage | Yes |
| Car wash brush | - |
| Surface cleaner | - |
| Rotating nozzle | - |
| Wash brush | - |
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Bosch UniversalAquatak 135 below.
The Bosch UniversalAquatak 135 has a weight of 7900 g.
To assemble the Bosch UniversalAquatak 135, start by attaching the handle to the main unit, ensuring it is securely fastened. Next, connect the high-pressure hose to the machine and the spray gun, making sure they click into place. To disassemble, simply reverse the assembly steps.
Begin by ensuring the water supply is turned off. Then, connect the hose adapter to the water inlet on the pressure washer, making sure it is tightly sealed. Afterward, connect the garden hose to the adapter and tighten it well. Finally, turn on the water supply.
The pressure of the Bosch UniversalAquatak 135 can be adjusted using the variable nozzle located at the end of the spray lance. Turning the nozzle clockwise decreases the pressure, while turning it counterclockwise increases the pressure. Experiment with different settings to find the pressure that suits your specific cleaning needs.
Regularly cleaning the filter is important for maintaining optimal performance. To clean the filter, first, detach the suction tube from the pressure washer. Then, unscrew the filter cap located at the end of the suction tube. Rinse the filter thoroughly under running water until it is free from debris. Reassemble the filter cap and attach the suction tube back to the pressure washer.
When storing the Bosch UniversalAquatak 135, it is crucial to ensure it is protected from frost, extreme temperatures, and direct sunlight. Before storing, disconnect the pressure washer from the power supply and allow it to cool down. Drain any remaining water from the unit and hoses to avoid potential damage. Store in a clean and dry place, ideally in its original packaging or a suitable cover.
Yes, the Bosch UniversalAquatak 135 has a compact form factor. This means that it is designed to be easy to store and transport.
Yes, the Bosch UniversalAquatak 135 has a special nozzle. This nozzle provides optimized water flow and pressure for effective cleaning.
Yes, the Bosch UniversalAquatak 135 is equipped with a water filter. This helps to prevent dirt and debris from clogging the pressure washer, ensuring longer-lasting performance.
Yes, the Bosch UniversalAquatak 135 has a detergent tank. This allows users to easily apply cleaning solutions for more thorough cleaning results.
The Bosch UniversalAquatak 135 has a maximum working pressure of 135 bar. This high pressure rating ensures efficient and effective cleaning power for a wide range of tasks.
Yes, the manual of the Bosch UniversalAquatak 135 is available in English .
Is your question not listed? Ask your question here
No results
Need help?
Do you have a question about the Bosch and is the answer not in the manual?
Question and answer
Number of questions: 6How do I adjust the 3 nozzles on the Bosch UniversalAquatak 135 pressure washer? I want to use the wide spray, but I am probably too dumb...
This message has been automatically translatedWater flow rates each Aquatak universal 135 Lance. How many litres to pass through 300ml foam bottle to empty the detergent concentrate solution
I am unable to turn the trio head in order to use all the spray patterns. Any suggestions?
Why is my Bosch 135 not working after 1 minutes use after opening from the box ?
Can I use the pressure washer on wooden decks?
how to alter the end nozzle