Bosch UNEO manual

Bosch UNEO
8.5 · 9
PDF manual
 · 202 pages
English
manualBosch UNEO
Robert Bosch Power Tools GmbH
70538 Stuttgart
GERMANY
www.bosch-pt.com
1 609 92A 351 (2016.09) PS / 203
Uneo
de Originalbetriebsanleitung
en Original instructions
fr Notice originale
es Manual original
pt Manual original
it Istruzioni originali
nl Oorspronkelijke
gebruiksaanwijzing
da Original brugsanvisning
sv Bruksanvisning i original
no Original driftsinstruks
fi Alkuperäiset ohjeet
el Πρωτότυπο οδηγιών χρήσης
tr Orijinal işletme talimatı
pl Instrukcja oryginalna
cs Původní návod k používání
sk Pôvodný návod na použitie
hu Eredeti használati utasítás
ru Оригинальное руководство по
эксплуатации
uk Оригінальна інструкція з
експлуатації
kk Пайдалану нұсқаулығының
түпнұсқасы
ro Instrucţiuni originale
bg Оригинална инструкция
mk Оригинално упатство за работа
sr Originalno uputstvo za rad
sl Izvirna navodila
hr Originalne upute za rad
et Algupärane kasutusjuhend
lv Instrukcijas oriģinālvalodā
lt Originali instrukcija
ar
ςТЎϩХʉ ЌТϾϦφЍʉ ʌμВТЎϺυ
OBJ_BUCH-1695-004.book Page 1 Friday, September 2, 2016 3:45 PM

View the manual for the Bosch UNEO here, for free. This manual comes under the category drill machines and has been rated by 9 people with an average of a 8.5. This manual is available in the following languages: English. Do you have a question about the Bosch UNEO or do you need help? Ask your question here

Need help?

Do you have a question about the Bosch and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 3
K
KikeMarch 3, 2021

Hello, I am kike. I have tried to open it because it charges but does not work, and when I removed the last screw, there was a loose bearing and it disassembled. I would like to assemble it again, if it is not too much trouble. Thank you. The chuck gears also came loose. I would appreciate your help.

Hello, I am kike. I have tried to open it because it charges but does not work, and when I removed the last screw, there was ...
zoom-in
View photo
This message has been automatically translated
D
Dave MooneyJanuary 18, 2015

My Bosch D75745 Uneo cordless hammer drill has lost power, smokes, smells and flashes when I try to use it. I am guessing that it could be worn brushes but have not managed to part the two halves of the casing to check them out even after undoing all the screws. I should really take to a Bosch repair shop but as I live in Spain near Elchie I have no idea where to take it. Has anyone any ideas about how to repair it or get it repaired in my area

J
Juan CarlosJune 14, 2018

I have a hexagonal shank bit stuck in the chuck of my UNEO. How can I remove it?

This message has been automatically translated

The Bosch UNEO is a battery-powered drill machine that can drill into steel up to 8 millimeters in diameter, wood up to 10 millimeters, and concrete up to 10 millimeters. This drill machine weighs 1100 grams and has a maximum impact rate of 4800 beats per minute. Additionally, it has a reverse function for convenience while working. The Bosch UNEO's battery power source allows for maximum portability and flexibility when working in environments with limited electrical outlets. The weight of the drill machine ensures that users can easily carry it around while working, without experiencing fatigue. Its impact rate allows users to work with relative ease, with maximum efficiency. This drill machine is suited for a range of drilling applications, including use in home DIY projects and for light professional use. With its durable construction and reliable performance, it ensures long-term usage and can handle most drilling needs with ease. In summary, the Bosch UNEO drill machine is a reliable tool that is ideal for use in a variety of drilling applications. Its versatility and ease of use make it a useful tool for home projects as well as for professional use. Its high impact rate and reverse function ensure efficient and convenient operation.

General
BrandBosch
ModelUNEO | 0 603 952 020
Productdrill machine
EAN3165140471770, 3165140471787, 3165140571128, 3165140668712, 3165140808590
LanguageEnglish
FiletypeUser manual (PDF)
Power
Battery technologyLithium-Ion (Li-Ion)
Power sourceBattery
Performance
Drilling diameter in steel (max)8 mm
Drilling diameter in wood (max)10 mm
Impact rate4800 bpm
Drilling diameter in concrete (max)10 mm
Features
ReverseYes
Weight & dimensions
Weight1100 g
show more

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Bosch UNEO below.

How do I remove rust from my Bosch drill machine?

1. Soak the rusty part in vinegar until completely soaked through. 2. Let the vinegar work on the rust for 24 hours. 3. Remove the rust with a wire brush or aluminium foil.

What does '16V' or '20V' mean?

The maximum achievable charge level is expressed with 16V or 20V. The V in this case stands for Volt.

Do I have to wear hearing protection when using a drill machine?

The amount of sound varies a lot per brand and type of drill machine, it is therefore wise to wear hearing protection to be sure.

What is the weight of the Bosch UNEO?

The Bosch UNEO has a weight of 1100 g.

Why does the Bosch UNEO drill machine suddenly stop working while in use?

The most common reason for the drill machine to stop working unexpectedly is due to the battery being discharged. Ensure that the battery is charged fully before using the drill again.

How can I prevent the Bosch UNEO drill from overheating?

To prevent overheating, it is important to avoid exerting excessive pressure on the drill while operating. Allow the drill to cool down if it becomes hot during prolonged use.

What should I do if I notice the drill machine is not providing enough power?

If you experience a decrease in power, make sure you are using a fully charged battery. Additionally, check if the drill bit or accessory is worn out and needs replacement, as this can affect performance.

How can I accurately adjust the depth for drilling with the Bosch UNEO drill?

To adjust the drilling depth, refer to the depth stop included with the drill. Set the desired depth on the depth stop and secure it tightly before starting your drilling task.

Why is the Bosch UNEO drill producing excessive noise during operation?

Excessive noise can be caused by various factors, such as using a dull or incorrect drill bit, improper installation of accessories, or drilling in hard materials. Ensure you are using the appropriate drill bit and accessories for your task to minimize noise.

What is the maximum drilling diameter in steel for Bosch UNEO?

The maximum drilling diameter in steel for Bosch UNEO is 8 mm. This means that it is suitable for drilling holes up to 8 mm in diameter in steel material.

What is the maximum drilling diameter in wood for Bosch UNEO?

The maximum drilling diameter in wood for Bosch UNEO is 10 mm. This means that it is capable of drilling holes up to 10 mm in diameter in wood material.

Does Bosch UNEO have a reverse function?

Yes, Bosch UNEO has a reverse function. This allows the user to easily remove screws or back out drill bits without manually turning the drill around.

What is the power source of Bosch UNEO?

The power source of Bosch UNEO is battery. This means that it is cordless and can be easily used in places without access to an electrical outlet.

What is the impact rate of Bosch UNEO?

The impact rate of Bosch UNEO is 4800 bpm. This means that it delivers 4800 blows per minute, making it suitable for drilling into hard materials such as concrete.

Is the manual of the Bosch UNEO available in English?

Yes, the manual of the Bosch UNEO is available in English .

Is your question not listed? Ask your question here

No results