View the manual for the Bosch UNEO Maxx here, for free. This manual comes under the category drill machines and has been rated by 2 people with an average of a 6.2. This manual is available in the following languages: English. Do you have a question about the Bosch UNEO Maxx or do you need help? Ask your question here


| Brand | Bosch |
| Model | UNEO Maxx | 0 603 952 300 |
| Product | drill machine |
| EAN | 3165140582292, 3165140582308, 3165140582315, 3165140582322, 3165140740159, 3165140740173, 3165140821582, 3165140821599 |
| Language | English |
| Filetype | User manual (PDF) |
| Battery technology | Lithium-Ion (Li-Ion) |
| Power source | Battery |
| Battery voltage | 18 V |
| Impact energy (max) | 0.6 J |
| Rated speed (max) | 5000 RPM |
| Drilling diameter in steel (max) | 8 mm |
| Drilling diameter in wood (max) | 10 mm |
| Impact rate | 900 bpm |
| Drilling diameter in concrete (max) | 10 mm |
| Product color | Black, Green |
| Soft grip | Yes |
| Power protection features | Deep discharge, Overheating, Overload |
| SDS system | Yes |
| Noise level | 85 dB |
| Battery charger included | Yes |
| Weight | 1400 g |
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Bosch UNEO Maxx below.
1. Soak the rusty part in vinegar until completely soaked through. 2. Let the vinegar work on the rust for 24 hours. 3. Remove the rust with a wire brush or aluminium foil.
The maximum achievable charge level is expressed with 16V or 20V. The V in this case stands for Volt.
The amount of sound varies a lot per brand and type of drill machine, it is therefore wise to wear hearing protection to be sure.
The Bosch UNEO Maxx has a weight of 1400 g.
To change the drilling mode on your Bosch UNEO Maxx, simply rotate the mode selector dial located on the front of the drill machine. You can choose between drilling, hammer drilling, or chiseling modes.
The Bosch UNEO Maxx can handle a maximum drilling diameter of 10 millimeters in concrete, 10 millimeters in wood, and 10 millimeters in steel.
To adjust the clutch settings on your Bosch UNEO Maxx, locate the clutch adjustment ring behind the chuck. Rotate the ring to the desired clutch setting number to control the torque applied when drilling or screwdriving.
To change the drill bit on your Bosch UNEO Maxx, first ensure that the drill is turned off and unplugged. Then, pull back the chuck sleeve to open the jaws, insert the desired drill bit, and release the sleeve to securely hold the bit in place.
The recommended voltage for the battery pack of the Bosch UNEO Maxx is 18 volts. The capacity of the battery pack can vary, but it is commonly available in capacities ranging from 1.5 Ah (ampere-hours) to 2.0 Ah.
Yes, the Bosch UNEO Maxx does have an SDS system. This makes it easier to change the drill bits quickly and securely.
Yes, the Bosch UNEO Maxx can drill a maximum diameter of 10 mm in concrete. This makes it suitable for most common drilling tasks.
Yes, the Bosch UNEO Maxx is powered by a battery. This provides freedom of movement and eliminates the need for a power cord.
Yes, the Bosch UNEO Maxx has power protection features including deep discharge, overheating, and overload protection. This ensures the longevity of the tool and protects against potential damage.
The noise level of the Bosch UNEO Maxx is 85 dB. This is within the average range for power tools and may require ear protection during prolonged use.
Yes, the manual of the Bosch UNEO Maxx is available in English .
Is your question not listed? Ask your question here
No results
Need help?
Do you have a question about the Bosch and is the answer not in the manual?
Question and answer
Number of questions: 2My drill bit broke off in the chuck and the last piece is now stuck in the chuck. How can the chuck be removed to take out the rest of the drill bit?
My charger packed up I think the fusej blown how can I repair it