View the manual for the Bosch TDS6010 here, for free. This manual comes under the category irons and has been rated by 1 people with an average of a 8.2. This manual is available in the following languages: English. Do you have a question about the Bosch TDS6010 or do you need help? Ask your question here




The iron Bosch TDS6010 has a power of 2400 watts, providing a high level of heat to effectively remove wrinkles from clothing. With a maximum steam pressure of 5.5 bar, this iron delivers strong steam performance for efficient ironing. The water tank capacity of 1.5 liters allows for longer ironing sessions without the need for frequent refills. The heating time of 2 minutes ensures that the iron is ready to use quickly, saving time and providing convenience. The continuous steam performance of 120 grams per minute offers consistent steam output for smooth ironing. Equipped with a vertical steam function, the iron can also be used to steam clothes while they are hanging. The adjustable thermostat allows for customization based on fabric type and ironing preferences. With a steam boost performance of 350 grams per minute, tough wrinkles can be easily tackled. The iron also features cord storage to keep the area tidy and organized. An indication light and water level indicator provide visual cues for ease of use and maintenance. The Bosch TDS6010 is a reliable iron with high steam pressure and efficient performance.
| Brand | Bosch |
| Model | TDS6010 | TDS6010 |
| Product | iron |
| EAN | 4242002954585 |
| Language | English |
| Filetype | User manual (PDF) |
| Iron power | 2400 W |
| Maximum steam pressure | 5.5 bar |
| Water tank capacity | 1.5 L |
| Heating time | 2 min |
| Continuous steam performance | 120 g/min |
| Vertical steam function | Yes |
| Adjustable thermostat | Yes |
| Soleplate type | - |
| Product color | Blue, White |
| Steam boost performance | 350 g/min |
| Automatic anti-calc | - |
| Cord storage | Yes |
| Cord length | 1.8 m |
| Indication light | Yes |
| Water level indicator | Yes |
| AC input voltage | 220-240 V |
| AC input frequency | 50 - 60 Hz |
| Energy saving mode | Yes |
| Width | 285 mm |
| Depth | 245 mm |
| Height | 405 mm |
| Weight | 4800 g |
| Package weight | 5800 g |
| Quantity per pallet | 36 pc(s) |
| Manual | Yes |
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Bosch TDS6010 below.
A high wattage iron heats up faster.
Soak a cloth in vinegar and put your iron on the cloth for half an hour so that the vinegar can absorb into the stains. You can then remove the stains with a damp cloth.
Yes, irons are in principle only suitable for tap water.
The Bosch TDS6010 has a weight of 4800 g.
The Bosch TDS6010 has a height of 405 mm.
The Bosch TDS6010 has a width of 285 mm.
The Bosch TDS6010 has a depth of 245 mm.
The iron power of the Bosch TDS6010 is 2400 W. This high wattage means that the iron will heat up quickly and efficiently, allowing for faster ironing.
Yes, the Bosch TDS6010 does have a vertical steam function. This feature allows the iron to be used in an upright position, making it easier to remove wrinkles from hanging garments or curtains.
The water tank capacity of the Bosch TDS6010 is 1.5 L. This larger tank size means that users will not need to frequently refill the iron during ironing sessions, making it more convenient.
Yes, the Bosch TDS6010 does have an energy saving mode. This feature helps to conserve energy and reduce electricity consumption when the iron is not in use, making it more environmentally friendly.
The continuous steam performance of the Bosch TDS6010 is 120 g/min. This high steam output allows for efficient and effective ironing, helping to remove stubborn wrinkles with ease.
To troubleshoot if the steam release button of the Bosch TDS6010 iron is not working, you can follow these steps: 1. Check for condensation: If the steam release button has not been used for a long time or is being used for the first time, there might be condensation inside the tubes. Point the iron away from the ironing area and press the steam release button until steam is produced. 2. Clean the iron: If dirt is coming out through the soleplate, there might be a build-up of limescale or minerals in the boiler and iron. Carry out a cleaning cycle as described in the "Descaling process" section of the manual. Avoid using chemical products or additives in the water. 3. Tighten the boiler cap: If there is water leakage from the boiler, check if the boiler cap is loose. Tighten the cap securely. 4. Contact customer service: If the above steps do not solve the problem, it is recommended to get in touch with the Bosch customer service for further assistance. Remember to always refer to the manual for detailed instructions and safety precautions.
If the PulseSteam function of the Bosch TDS6010 iron is not producing enough steam, you can try the following steps to troubleshoot the issue: 1. Check for condensation: If the steam release button has not been used for a long time or is being used for the first time, there might be condensation inside the tubes. Point the iron away from the ironing area and press the steam release button until steam is produced. 2. Clean the iron: If dirt is coming out through the soleplate, there might be a build-up of limescale or minerals in the boiler and iron. Carry out a cleaning cycle as described in the descaling process section of the manual. Avoid using chemical products or additives in the water. 3. Ensure proper usage: Make sure you are using the PulseSteam function correctly. Press the steam release button two times in quick succession (double-click) to activate powerful shots of steam. 4. Check the energy saving setting: If the energy saving mode is activated, it may affect the steam production. Press the energy saving button again to switch back to the normal energy setting for optimum steam output. 5. Contact customer service: If the above steps do not resolve the issue, it is recommended to contact Bosch customer service for further assistance. Please note that these troubleshooting steps are based on general guidelines and may vary depending on the specific model of the Bosch TDS6010 iron.
If the vertical steam function of the Bosch TDS6010 iron is not removing creases effectively, you can try the following steps to troubleshoot the issue: 1. Check for condensation: If the steam release button has not been used for a long time or is being used for the first time, there might be condensation inside the tubes. Point the iron away from the garment and press the steam release button until steam is produced. 2. Adjust the distance: Ensure that you are holding the iron in an upright position about 15 cm away from the garment. This distance allows the steam to effectively penetrate the fabric and remove creases. 3. Press the steam release button repeatedly: While holding the iron in an upright position, press the steam release button repeatedly with pauses of at least 5 seconds. This allows the steam to be released in bursts and helps in removing stubborn creases. 4. Avoid pointing the steam jet at garments being worn: Make sure to never direct the steam jet towards garments being worn, people, or animals. This is for safety reasons and to prevent any accidents. If the issue persists after following these steps, it is recommended to contact Bosch customer service for further assistance.
To troubleshoot if the energy saving mode of the Bosch TDS6010 iron is not activating, you can follow these steps: 1. Check the energy saving button: Ensure that you are pressing the correct button to activate the energy saving mode. Look for the "Eco" button on the iron's control panel. 2. Verify the indicator light: After pressing the energy saving button, check if the indicator light corresponding to the energy saving mode comes on. If the light does not illuminate, it indicates that the energy saving mode is not activated. 3. Press the button again: If the indicator light does not come on, try pressing the energy saving button again. Sometimes, a second press is required to activate or deactivate the energy saving mode. 4. Check the power supply: Ensure that the iron is properly connected to a functioning power source. If there is a power issue, the energy saving mode may not activate. 5. Contact customer service: If the energy saving mode still does not activate after following the above steps, it is recommended to contact Bosch customer service for further assistance. Please note that these troubleshooting steps are based on general guidelines and may vary depending on the specific model of the Bosch TDS6010 iron.
If the EasyComfort feature of the Bosch TDS6010 iron is not working properly, you can try the following steps to troubleshoot the issue: 1. Check the water level: Ensure that the water tank of the iron is filled to the recommended level. If the water level is too low, the EasyComfort feature may not function as expected. 2. Verify the temperature setting: Make sure that the temperature setting of the iron is appropriate for the fabric you are ironing. The EasyComfort feature is designed to work efficiently across a range of fabrics, but using the correct temperature setting is important for optimal performance. 3. Clean the soleplate: If the soleplate is dirty or has residue buildup, it can affect the performance of the EasyComfort feature. Clean the soleplate according to the instructions provided in the manual to ensure smooth gliding and efficient steam distribution. 4. Check for blockages: Inspect the steam vents on the soleplate for any blockages or obstructions. If there are blockages, use a soft brush or cotton swab to remove any debris. 5. Contact customer service: If the EasyComfort feature continues to malfunction after following the above steps, it is recommended to contact Bosch customer service for further assistance. Please note that these troubleshooting steps are based on general guidelines and may vary depending on the specific model of the Bosch TDS6010 iron.
Yes, the manual of the Bosch TDS6010 is available in English .
Is your question not listed? Ask your question here
No results
Need help?
Do you have a question about the Bosch and is the answer not in the manual?
Question and answer
Number of questions: 2how to remove the water tank from the Bosch EasyComfort TDS6010 Series 6 iron?
No steam generating