View the manual for the Bosch SMV53M40GB here, for free. This manual comes under the category dishwashers and has been rated by 1 people with an average of a 7.2. This manual is available in the following languages: English. Do you have a question about the Bosch SMV53M40GB or do you need help? Ask your question here
Below you will find the product specifications and the manual specifications of the Bosch SMV53M40GB.
| Brand | Bosch |
| Model | SMV53M40GB |
| Product | dishwasher |
| Language | English |
| Filetype | User manual (PDF) |
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Bosch SMV53M40GB below.
In the case of a smelly dishwasher, you can take the following steps: - Clean the filters - Clean the spray arms - Clean the door rubbers - Run a hot wash program - Run an empty machine with a dishwasher cleaner
It is not recommended to rinse dirty dishes before placing them in the dishwasher. For the life cycle of the machine, it is better to put everything dirty in the dishwasher. The grease on the dirty dishes is the lubrication for the pump in the machine.
The average amount used is about 25 grams of dishwashing detergent. It is recommended to follow the advice on the packaging.
Each dishwasher has a separate compartment for softening salt. It opens when you turn the knob on the compartment. The softening salt can then be poured into the compartment by means of a funnel.
To properly connect the Bosch SMV53M40GB dishwasher to the water supply, follow these steps: 1. Check the product package: Ensure that you have received all the necessary installation materials, such as the rubber apron, power cord, steam guard plate (if applicable), and any other components mentioned in the package. 2. Safety instructions: Before starting the installation, carefully read and follow the safety instructions provided in the manual. 3. Water pressure requirements: Make sure that the water pressure in your home meets the minimum requirement of at least 0.05 MPa (0.5 bar) and does not exceed 1 MPa (10 bar). If the water pressure is higher, you may need to install a pressure-reducing valve. 4. Inlet rate: Ensure that the minimum water inlet rate is 10 liters per minute. 5. Cold or hot water connection: The dishwasher can be connected to either cold or hot water, with a maximum temperature of 60 °C. If you have access to energetically favorable hot water, it is recommended to connect the dishwasher to hot water to save energy and time. 6. Setting hot water (optional): If you choose to connect the dishwasher to hot water, you can adjust the appliance to operate optimally with hot water. Follow the instructions in the manual to set the hot water option. Remember to consult the manual for any specific details or variations based on your model.
If the Bosch SMV53M40GB dishwasher is not draining properly during installation, follow these steps: 1. Empty the dishwasher: Make sure the dishwasher is empty of any dishes or utensils. 2. Secure loose parts: Check that all parts inside the dishwasher, such as the racks and spray arms, are properly secured and not obstructing the drainage system. 3. Drain the appliance: Follow these steps to drain the dishwasher: a. Turn on the tap. b. Open the door of the dishwasher. c. Switch on the ON/OFF switch. d. Select the program with the highest temperature. e. Press the START button. f. Close the door. g. After approximately 4 minutes, open the door. h. Press the START button until "‹:‹‚" is indicated on the digital display. i. Close the door. j. After approximately 1 minute, open the door. The numerical display should indicate "‹:‹‹". k. Switch off the ON/OFF switch. l. Turn off the tap, disconnect the supply hose, and drain the water. 4. Transport the appliance upright: When moving the dishwasher, ensure it is transported in an upright position to prevent residual water from damaging the program sequence. If the issue persists after following these steps, it is recommended to consult the manual or contact customer support for further assistance.
To secure loose parts of the Bosch SMV53M40GB dishwasher during transportation, follow these steps: 1. Empty the dishwasher: Remove all dishes, utensils, and any other items from the dishwasher. 2. Secure the racks: Make sure the racks are properly positioned and secured inside the dishwasher. Ensure that they are not loose or wobbly. 3. Secure the spray arms: Check that the spray arms are securely attached and not loose. Gently push and rotate them to ensure they are properly seated. 4. Secure the cutlery basket: If your dishwasher has a cutlery basket, ensure that it is securely placed in its designated position. Make sure it is not loose or sliding around. 5. Secure the filters: Check that the filters are properly installed and locked in place. They should not be loose or easily removable. 6. Close and latch the door: Close the dishwasher door firmly and ensure that it latches securely. This will prevent the door from opening during transportation. By following these steps, you can securely fasten the loose parts of the dishwasher and minimize the risk of damage during transportation.
To protect the Bosch SMV53M40GB dishwasher against frost during transportation, follow these steps: 1. Empty the dishwasher: Remove all dishes, utensils, and any other items from the dishwasher. 2. Drain the appliance: Ensure that the dishwasher is completely drained of water. Run a drain cycle or use the cancel/drain function to remove any remaining water. 3. Disconnect the water supply: Turn off the water supply to the dishwasher and disconnect the water inlet hose. This will prevent any water from freezing and causing damage during transportation. 4. Protect the appliance: Wrap the dishwasher with a thick blanket or use foam padding to provide insulation and protect it from extreme temperatures. 5. Secure the door: Close and latch the dishwasher door securely to prevent it from opening during transportation. 6. Transport the appliance upright: Always transport the dishwasher in an upright position to avoid any potential damage to the internal components. By following these steps, you can ensure that the Bosch SMV53M40GB dishwasher is protected against frost and safely transported to its destination.
If the Bosch SMV53M40GB dishwasher is not functioning properly after installation, you can try the following steps: 1. Check for detergent residue: If there is detergent residue in the detergent dispenser or tablet collecting tray, it may affect the dishwasher's performance. Ensure that the spray arms are not blocked by utensils and can rotate freely. 2. Verify proper detergent usage: Make sure the detergent dispenser was dry when filled and that you are using the correct amount and type of detergent. 3. Ensure proper door closure: If the appliance stops in the program or the program is interrupted, check if the door is closed properly. Avoid placing utensils or fragrance dispensers in the tablet collecting tray. 4. Check for obstructions: If the top basket presses against the door and prevents it from closing securely, check if the rear panel is being pressed in by a socket or hose holder that has not been removed. 5. Restore power and water supply: If the power and/or water supply is interrupted, restore them to ensure proper functioning of the dishwasher. 6. Address unusual noises: If you hear knocking or rattling noises, make sure utensils are positioned correctly and not striking the spray arms. If there is low load, load the appliance with more utensils or distribute them evenly. Secure light utensils to prevent movement during the wash cycle. 7. Address foam formation: If there is unusual foam formation, refill the rinse aid dispenser immediately and remove any spilled rinse aid. If the issue persists after following these steps, it is recommended to contact the dealer or customer service for further assistance.
Yes, the manual of the Bosch SMV53M40GB is available in English .
Is your question not listed? Ask your question here
No results
Need help?
Do you have a question about the Bosch and is the answer not in the manual?
Question and answer
Number of questions: 0