View the manual for the Bosch SMV45IX03E here, for free. This manual comes under the category dishwashers and has been rated by 2 people with an average of a 7.1. This manual is available in the following languages: English. Do you have a question about the Bosch SMV45IX03E or do you need help? Ask your question here




Below you will find the product specifications and the manual specifications of the Bosch SMV45IX03E.

| Brand | Bosch |
| Model | SMV45IX03E | SMV45IX03E |
| Product | dishwasher |
| EAN | 4242002965055 |
| Language | English |
| Filetype | User manual (PDF), Energy label (PDF) |
| Number of place settings | 13 place settings |
| Noise level | 44 dB |
| Cycle time | 195 min |
| Number of washing programs | 5 |
| Dishwashing programs | Auto 45-65°C, Eco, Glass/delicate, Intensive, Quick |
| Drying system | Heat exchanger |
| AquaSensor function | Yes |
| Delayed start timer | Yes |
| Delay start (max) | 24 h |
| AquaStop function | Yes |
| Glass protection | Yes |
| Temperature (max) | 70 °C |
| Number of temperature settings | 5 |
| B |
| Water fill | Cold, Hot |
| Concealed heating element | Yes |
| Cutlery compartment type | Basket |
| Upper basket adjustable height | Yes |
| Baskets adjustable placement | Upper |
| Tub material | Stainless steel |
| Appliance placement | Fully built-in |
| Product size | Full size (60 cm) |
| Door color | Not applicable |
| Control panel color | Stainless steel |
| Control type | Buttons |
| Built-in display | Yes |
| Lower built-in capability (topless) | Yes |
| Cord length | 1.75 m |
| Outlet hose length | 1.9 m |
| Built-in water softener | Yes |
| Inlet hose length | 1.65 m |
| Self-cleaning filter | Yes |
| Remaining time indication | Yes |
| Buzzer | Yes |
| Salt indicator | Yes |
| Rinse aid indicator | Yes |
| Adjustable feet | Yes |
| Interior light | Yes |
| Dosage assistant | Yes |
| Height | 815 mm |
| Width | 598 mm |
| Depth | 550 mm |
| Weight | 44000 g |
| Energy consumption per cycle | 0.82 kWh |
| Power consumption (off) | 0.1 W |
| Water consumption per cycle | 9.5 L |
| Current | 10 A |
| AC input voltage | 220 - 240 V |
| AC input frequency | 50 - 60 Hz |
| Connected load | 2400 W |
| Energy efficiency class | D |
| Energy efficiency scale | A to G |
| 84 kWh |
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Bosch SMV45IX03E below.
In the case of a smelly dishwasher, you can take the following steps: - Clean the filters - Clean the spray arms - Clean the door rubbers - Run a hot wash program - Run an empty machine with a dishwasher cleaner
It is not recommended to rinse dirty dishes before placing them in the dishwasher. For the life cycle of the machine, it is better to put everything dirty in the dishwasher. The grease on the dirty dishes is the lubrication for the pump in the machine.
The average amount used is about 25 grams of dishwashing detergent. It is recommended to follow the advice on the packaging.
Each dishwasher has a separate compartment for softening salt. It opens when you turn the knob on the compartment. The softening salt can then be poured into the compartment by means of a funnel.
The Bosch SMV45IX03E has a weight of 44000 g.
The Bosch SMV45IX03E has a height of 815 mm.
The Bosch SMV45IX03E has a width of 598 mm.
The Bosch SMV45IX03E has a depth of 550 mm.
The Bosch SMV45IX03E has energy label D.
The Bosch SMV45IX03E has 13 place settings. This means that it can accommodate a good amount of dishes, making it suitable for medium-sized households.
The noise level of the Bosch SMV45IX03E is 44 dB. This is considered to be relatively quiet, ensuring a peaceful environment while the dishwasher is running.
The cycle time for the Bosch SMV45IX03E is 195 minutes. This indicates that the dishwasher may take a bit longer to complete a cycle compared to some other models.
Yes, the Bosch SMV45IX03E has the ability to fill water using both cold and hot options. This flexibility allows for better customization and efficiency in different washing scenarios.
Yes, the Bosch SMV45IX03E has a concealed heating element. This feature helps in achieving better drying results and reduces the risk of accidents when accessing the dishwasher's interior.
To change the factory settings of the Bosch SMV45IX03E dishwasher, follow these steps: 1. Open the dishwasher door. 2. Switch on the ON/OFF switch. 3. Press and hold the Info button (number 8) for 3 seconds until the display window shows the following text: "Scroll with < >, Set with - +, Leave with Setup 3 sec." 4. Use the < > buttons to scroll through the settings until you find the one you want to change. 5. Adjust the setting using the + and - buttons. 6. Press and hold the Info button (number 8) for 3 seconds to save the chosen setting. 7. The new setting is now stored. If you want to reset all the changed settings back to the original factory settings, follow these additional steps: 1. Press and hold the Info button (number 8) for 3 seconds. 2. The dishwasher will be reset to the factory settings, and you will be taken directly to the settings for the initial start-up. Please note that the specific factory settings available may vary depending on the configuration of your dishwasher.
To navigate the display window and access different settings and options on the Bosch SMV45IX03E dishwasher, follow these steps: 1. Open the dishwasher door. 2. Switch on the ON/OFF switch. 3. Press and hold the Info button (number 8) for 3 seconds until the display window shows the following text: "Scroll with < >, Set with - +, Leave with Setup 3 sec." 4. Use the < > buttons to scroll through the available settings and options. 5. When you find the desired setting or option, press the corresponding button (e.g., programme button) to access more information or make changes. 6. The display window will show the relevant information or options for the selected setting. 7. Use the + and - buttons to adjust the setting or option as needed. 8. Press and hold the Info button (number 8) for 3 seconds to save the changes. 9. The display window will now show the updated setting or option. By following these steps, you can easily navigate the display window of the Bosch SMV45IX03E dishwasher to access and modify different settings and options according to your preferences.
To change the time setting on the Bosch SMV45IX03E dishwasher, follow these steps: 1. Open the dishwasher door. 2. Switch on the ON/OFF switch. 3. Press and hold the Info button (number 8) for 3 seconds until the display window shows the text: "Scroll with < >, Set with - +, Leave with Setup 3 sec." 4. Use the > button to scroll through the settings until you find the "Time setting" option. 5. Press the + or - button to adjust the time to the desired value. 6. Press and hold the Info button (number 8) for 3 seconds to save the new time setting. 7. The time setting is now updated. Please note that the time format (12-hour or 24-hour) can also be changed using the same method. Additionally, during the initial start-up of the dishwasher, you can set the current time as part of the initial settings. By following these steps, you can easily change the time setting on your Bosch SMV45IX03E dishwasher to ensure accurate timing for your wash cycles.
The default time format on the Bosch SMV45IX03E dishwasher is 24-hour format. However, you can change it to a 12-hour format if desired. Here are the steps to change the time format: 1. Open the dishwasher door. 2. Switch on the ON/OFF switch. 3. Press and hold the Info button (number 8) for 3 seconds until the display window shows the text: "Scroll with < >, Set with - +, Leave with Setup 3 sec." 4. Use the < > buttons to scroll through the settings until you find the "Time format" option. 5. Press the + or - button to toggle between the available options (12-hour or 24-hour format). 6. Select the desired time format. 7. Press and hold the Info button (number 8) for 3 seconds to save the new time format. 8. The time format is now updated. By following these steps, you can easily change the time format on your Bosch SMV45IX03E dishwasher to either 12-hour or 24-hour format according to your preference.
To adjust the water hardness setting on the Bosch SMV45IX03E dishwasher, follow these steps: 1. Open the dishwasher door. 2. Switch on the ON/OFF switch. 3. Press and hold the Info button (number 8) for 3 seconds until the display window shows the text: "Scroll with < >, Set with - +, Leave with Setup 3 sec." 4. Use the > button to scroll through the settings until you find the "Water hardness" option. 5. Press the + or - button to adjust the water hardness setting according to the value provided by your local water utility company. 6. Refer to the water hardness table in the manual to determine the required setting based on the water hardness value. 7. Press and hold the Info button (number 8) for 3 seconds to save the new water hardness setting. 8. The chosen setting is now stored. By following these steps, you can easily adjust the water hardness setting on your Bosch SMV45IX03E dishwasher to ensure optimal performance and efficiency based on the hardness of your tap water.
The recommended rinse aid dispenser level for optimal drying on the Bosch SMV45IX03E dishwasher is set to level 5. To adjust the rinse aid dispenser level, follow these steps: 1. Open the dishwasher door. 2. Switch on the ON/OFF switch. 3. Press and hold the Info button (number 8) for 3 seconds until the display window shows the text: "Scroll with < >, Set with - +, Leave with Setup 3 sec." 4. Use the > button to scroll through the settings until you find the "Rinse aid dispenser" option. 5. Press the + or - button to adjust the rinse aid dispenser level to 5 for optimal drying performance. 6. Press and hold the Info button (number 8) for 3 seconds to save the new rinse aid dispenser level. 7. The chosen setting is now stored. By following these steps, you can ensure that the rinse aid dispenser is set to the recommended level of 5, which will help achieve excellent drying results for your dishes and utensils.
To enable or disable the extra dry option for better drying performance on the Bosch SMV45IX03E dishwasher, follow these steps: 1. Open the dishwasher door. 2. Switch on the ON/OFF switch. 3. Press and hold the Info button (number 8) for 3 seconds until the display window shows the text: "Scroll with < >, Set with - +, Leave with Setup 3 sec." 4. Use the > button to scroll through the settings until you find the "Extra dry" option. 5. Press the + or - button to toggle between enabling or disabling the extra dry option. 6. Select the desired setting based on your preference. 7. Press and hold the Info button (number 8) for 3 seconds to save the new setting. 8. The extra dry option is now enabled or disabled, depending on your selection. By following these steps, you can easily enable or disable the extra dry option on your Bosch SMV45IX03E dishwasher, allowing for better drying performance of your dishes and utensils.
The Bosch SMV45IX03E dishwasher is designed to be connected to cold water only. It is not compatible with hot water connections. To ensure proper operation and avoid any potential damage to the dishwasher, follow these steps: 1. Locate the water supply valve near the dishwasher. 2. Turn off the hot water supply to the dishwasher by closing the water supply valve. 3. Connect the dishwasher's water inlet hose to the cold water supply. 4. Ensure that the water inlet hose is securely connected and there are no leaks. 5. Turn on the cold water supply by opening the water supply valve. 6. The dishwasher is now ready to use with cold water. By following these steps, you can ensure that the Bosch SMV45IX03E dishwasher is connected to the appropriate cold water supply, which is the recommended and compatible option for optimal performance and safety.
To activate the interior light of the Bosch SMV45IX03E dishwasher, follow these steps: 1. Open the dishwasher door. 2. Locate the "Interior Light" button on the control panel. 3. Press the "Interior Light" button to activate the interior light. 4. The interior light will turn on, illuminating the inside of the dishwasher. 5. To turn off the interior light, press the "Interior Light" button again. 6. The interior light will turn off. By following these steps, you can easily activate and deactivate the interior light of the Bosch SMV45IX03E dishwasher. The interior light provides visibility inside the dishwasher, making it easier to load and unload dishes, especially in low-light conditions.
To reset all the changed settings back to the original factory settings on the Bosch SMV45IX03E dishwasher, follow these steps: 1. Open the dishwasher door. 2. Switch on the ON/OFF switch. 3. Press and hold the Info button (number 8) for 3 seconds until the display window shows the text: "Scroll with < >, Set with - +, Leave with Setup 3 sec." 4. Use the < > buttons to scroll through the settings until you find the "Setup" option. 5. Press the Setup button to enter the setup menu. 6. Use the < > buttons to navigate through the setup menu until you find the "Factory settings" option. 7. Press the Factory settings button to select it. 8. A confirmation message will appear on the display window. 9. Press the Yes button to confirm and reset all the settings back to the original factory settings. 10. The dishwasher will reset, and the settings will be restored to their default values. By following these steps, you can easily reset all the changed settings on your Bosch SMV45IX03E dishwasher back to the original factory settings, ensuring that the dishwasher is set up according to the manufacturer's recommended configuration.
Yes, the manual of the Bosch SMV45IX03E is available in English .
Is your question not listed? Ask your question here
No results
Need help?
Do you have a question about the Bosch and is the answer not in the manual?
Question and answer
Number of questions: 0