View the manual for the Bosch Serie 8 DFS067K50 here, for free. This manual comes under the category exhaust hoods and has been rated by 1 people with an average of a 6.2. This manual is available in the following languages: English. Do you have a question about the Bosch Serie 8 DFS067K50 or do you need help? Ask your question here





| Brand | Bosch |
| Model | Serie 8 DFS067K50 | DFS067K50 |
| Product | exhaust hood |
| EAN | 4242002878300 |
| Language | English |
| Filetype | User manual (PDF), Energy label (PDF) |
| Maximum extraction power | 700 m³/h |
| Type of extraction | Ducted/Recirculating |
| Fluid dynamic efficiency class | A |
| Lighting efficiency class | A |
| Grease filtering efficiency class | B |
| Number of speeds | 5 |
| Intensive speed | Yes |
| Noise level | 54 dB |
| Maximum recirculating power | 290 m³/h |
| Type | Built-in |
| Exhaust connection diameter | 120 mm |
| Certification | CE, VDE |
| Number of motors | 2 |
| Built-in display | Yes |
| Housing material | Stainless steel |
| Product color | Stainless steel |
| Control type | Touch |
| Cord length | 1.75 m |
| Exhaust location | Top |
| Number of bulbs | 2 bulb(s) |
| Bulb type | LED |
| Bulb power | 6 W |
| Illuminance | 683 lx |
| Motor power | 146 W |
| Connected load | 140 W |
| Energy efficiency class | A |
| Annual energy consumption | 34 kWh |
| Auto power off | Yes |
| Current | 10 A |
| AC input voltage | 220-240 V |
| AC input frequency | 50 - 60 Hz |
| Grease filter type | Stainless steel |
| Width | 598 mm |
| Depth | 290 mm |
| Height | 471 mm |
| Height without chimney | 426 mm |
| Weight | 14000 g |
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Bosch Serie 8 DFS067K50 below.
The Bosch Serie 8 DFS067K50 has a weight of 14000 g.
The Bosch Serie 8 DFS067K50 has the following certifications: CE, VDE.
The carbon filter should be replaced every three to twelve months.
The metal grease filters should be cleaned every eight to ten weeks.
The model number of the hood is usually found on a white label inside the hood.
The Bosch Serie 8 DFS067K50 has a height of 471 mm.
The Bosch Serie 8 DFS067K50 has a width of 598 mm.
The Bosch Serie 8 DFS067K50 has a depth of 290 mm.
The Bosch Serie 8 DFS067K50 has energy label A.
The maximum extraction power of the Bosch Serie 8 DFS067K50 is 700 m³/h. This high extraction power ensures efficient removal of cooking odors and smoke, providing a clean and fresh kitchen environment for the user.
Yes, the Bosch Serie 8 DFS067K50 has an intensive speed setting. This feature allows for quick and powerful extraction when needed, such as when dealing with heavy smoke or strong odors during intense cooking sessions.
The noise level of the Bosch Serie 8 DFS067K50 is 54 dB. This indicates that the exhaust hood operates relatively quietly, ensuring a peaceful cooking experience for the user without disturbing conversations or activities in the kitchen.
The Bosch Serie 8 DFS067K50 has 2 bulb(s). The LED bulbs provide bright and energy-efficient lighting for the cooking area, enhancing visibility and creating a pleasant ambiance in the kitchen.
The fluid dynamic efficiency class of the Bosch Serie 8 DFS067K50 is A. This indicates that the exhaust hood is highly efficient in extracting airborne impurities and maintaining good air quality in the kitchen. It performs better in fluid dynamic efficiency compared to products with lower efficiency classes.
To troubleshoot if the Bosch Serie 8 DFS067K50 exhaust hood is not turning on when you press the power button, follow these steps: 1. Check the power supply: Ensure that the exhaust hood is properly connected to a power source and that the power supply is functioning correctly. Check if the power cord is securely plugged into the outlet. 2. Reset the circuit breaker: If the exhaust hood is not receiving power, check the circuit breaker or fuse box. Reset the circuit breaker or replace the fuse if necessary. 3. Check the control panel: Make sure that the control panel is not locked or in a standby mode. Some models may have a lock feature to prevent accidental operation. Refer to the manual for instructions on how to unlock the control panel. 4. Test the power button: Press and hold the power button for a few seconds to ensure that it is functioning properly. If the button feels loose or unresponsive, it may need to be repaired or replaced. 5. Contact customer support: If the exhaust hood still does not turn on after following these steps, it is recommended to contact Bosch customer support for further assistance. They can provide specific troubleshooting steps or arrange for a service technician to inspect the appliance. By following these troubleshooting steps, you can identify and resolve the issue of the exhaust hood not turning on when the power button is pressed.
To troubleshoot if the fan speed of the Bosch Serie 8 DFS067K50 exhaust hood is not changing when you adjust it, follow these steps: 1. Check the control panel: Ensure that the control panel is not locked or in standby mode. Some models have a lock feature to prevent accidental changes. Refer to the manual for instructions on how to unlock the control panel. 2. Verify the fan settings: Pull out the filter pull-out and touch the % symbol to switch on the fan. Select the desired fan setting using the available options. Note that when the filter pull-out is pushed in, only certain fan settings may be available. 3. Reset the exhaust hood: If the fan speed is still not changing, try resetting the exhaust hood. Touch the % symbol to switch off the fan and slide in the filter pull-out. This can help reset the settings and resolve any temporary issues. 4. Contact customer support: If the fan speed continues to be unresponsive, it is recommended to contact Bosch customer support for further assistance. They can provide specific troubleshooting steps or arrange for a service technician to inspect the exhaust hood. By following these steps, you can troubleshoot and resolve the issue of the fan speed not changing when adjusting the Bosch Serie 8 DFS067K50 exhaust hood.
To troubleshoot if the intensive setting of the Bosch Serie 8 DFS067K50 exhaust hood is not working, follow these steps: 1. Check the control panel: Ensure that the control panel is not locked or in standby mode. Some models have a lock feature to prevent accidental changes. Refer to the manual for instructions on how to unlock the control panel. 2. Activate the intensive setting: Touch the C or D symbol on the control panel to activate the intensive setting. The intensive setting is used when there is a large buildup of odors and fumes/vapors in the kitchen. 3. Wait for automatic reduction: After approximately six minutes, the electronics of the exhaust hood will automatically reduce the fan speed to a lower setting. This is a normal operation to maintain optimal performance and reduce noise levels. 4. End the intensive setting: If you want to end the intensive setting before the preset time expires, touch the symbol for the required fan setting. This will switch the exhaust hood to the desired fan speed. If the intensive setting is still not working after following these steps, it is recommended to contact Bosch customer support for further assistance. They can provide specific troubleshooting steps or arrange for a service technician to inspect the exhaust hood.
To troubleshoot if the saturation display of the Bosch Serie 8 DFS067K50 exhaust hood is showing even after cleaning the filters, follow these steps: 1. Check the filter cleaning: Ensure that the metal grease filters have been properly cleaned. Refer to the manual for instructions on how to clean the metal grease filters. Make sure to clean both the filters and the holder for the filters using a damp cloth. 2. Verify the filter installation: Ensure that the metal grease filters have been correctly installed back into the exhaust hood. Make sure they are securely in place and not loose or misaligned. 3. Reset the saturation display: If the saturation display continues to show even after cleaning the filters, try resetting the display. Touch the corresponding symbol for the metal grease filter (E) on the control panel to reset the saturation display. This should clear the indication and allow the exhaust hood to function properly. 4. Contact customer support: If the saturation display still persists after following these steps, it is recommended to contact Bosch customer support for further assistance. They can provide specific troubleshooting steps or arrange for a service technician to inspect the exhaust hood. By following these steps, you can troubleshoot and resolve the issue of the saturation display showing even after cleaning the filters on the Bosch Serie 8 DFS067K50 exhaust hood.
To troubleshoot if the Bosch Serie 8 DFS067K50 exhaust hood is not conveying the exhaust air properly in the exhaust air mode, follow these steps: 1. Check the exhaust duct: Ensure that the exhaust duct is not blocked or obstructed. Inspect the duct for any debris, obstructions, or bends that may be restricting the airflow. Clear any blockages and ensure that the duct is properly connected to the exhaust hood. 2. Verify the exhaust outlet: Check the exhaust outlet outside your home to ensure that it is not blocked or covered. Remove any obstructions, such as leaves or debris, that may be blocking the outlet. 3. Adjust the fan speed: Increase the fan speed to a higher setting to improve the airflow. The higher the fan speed, the more air the exhaust hood will be able to convey. Refer to the manual for instructions on how to adjust the fan speed. 4. Clean or replace the filters: If the exhaust hood has grease or carbon filters, check if they are dirty or clogged. Clean the filters according to the manual's instructions or replace them if necessary. Dirty filters can restrict the airflow and affect the performance of the exhaust hood. 5. Contact customer support: If the exhaust hood still does not convey the exhaust air properly after following these steps, it is recommended to contact Bosch customer support for further assistance. They can provide specific troubleshooting steps or arrange for a service technician to inspect the exhaust hood. By following these steps, you can troubleshoot and resolve the issue of the exhaust hood not conveying the exhaust air properly in the exhaust air mode for the Bosch Serie 8 DFS067K50 exhaust hood.
To troubleshoot if the activated carbon filter is not installed correctly for air recirculation mode in the Bosch Serie 8 DFS067K50 exhaust hood, follow these steps: 1. Check the filter compatibility: Ensure that the activated carbon filter is compatible with the Bosch Serie 8 DFS067K50 exhaust hood. Refer to the manual or product specifications to verify the correct filter model. 2. Remove and reinsert the filter: Carefully remove the activated carbon filter from the exhaust hood. Check for any visible damage or misalignment. Reinsert the filter, ensuring that it is securely in place and properly aligned with the filter housing. 3. Verify the filter indicator: Check the filter indicator on the control panel. If the indicator is showing that the filter needs to be replaced, it may indicate that the filter is not installed correctly. Reset the filter indicator according to the manual's instructions. 4. Test the air recirculation mode: Activate the air recirculation mode and observe the performance of the exhaust hood. If there is still an issue with the activated carbon filter, it may require further inspection or replacement. 5. Contact customer support: If the activated carbon filter continues to not be installed correctly or if there are persistent issues with the air recirculation mode, it is recommended to contact Bosch customer support for further assistance. They can provide specific troubleshooting steps or arrange for a service technician to inspect the exhaust hood. By following these steps, you can troubleshoot and resolve issues related to the installation of the activated carbon filter for air recirculation mode in the Bosch Serie 8 DFS067K50 exhaust hood.
To troubleshoot why the lighting of the Bosch Serie 8 DFS067K50 exhaust hood is not turning on/off independently of the fan, follow these steps: 1. Check the lighting settings: Ensure that the lighting settings are properly configured. Some models may have separate controls for the fan and lighting. Verify that the lighting is not set to a specific mode or deactivated. 2. Test the lighting switch: Press the lighting switch or button to check if it is functioning properly. If the switch feels loose or unresponsive, it may need to be repaired or replaced. 3. Verify the power supply: Ensure that the exhaust hood is properly connected to a power source and that the power supply is functioning correctly. Check if the power cord is securely plugged into the outlet. 4. Reset the exhaust hood: Try resetting the exhaust hood by turning off the power and then turning it back on. This can help resolve any temporary issues with the lighting function. 5. Contact customer support: If the lighting still does not turn on/off independently of the fan after following these steps, it is recommended to contact Bosch customer support for further assistance. They can provide specific troubleshooting steps or arrange for a service technician to inspect the exhaust hood. By following these steps, you can troubleshoot and resolve the issue of the lighting not turning on/off independently of the fan in the Bosch Serie 8 DFS067K50 exhaust hood.
To troubleshoot if the brightness of the lighting is not adjustable in the Bosch Serie 8 DFS067K50 exhaust hood, follow these steps: 1. Check the lighting settings: Ensure that the lighting settings are properly configured. Some models may have different brightness levels or lighting modes. Verify that the lighting is not set to a specific mode that does not allow brightness adjustment. 2. Test the brightness control: Use the brightness control feature to adjust the lighting intensity. If the control feels unresponsive or the brightness does not change, try pressing the control button multiple times or holding it down for a few seconds to see if it activates the adjustment function. 3. Verify the power supply: Ensure that the exhaust hood is properly connected to a power source and that the power supply is functioning correctly. Check if the power cord is securely plugged into the outlet. 4. Reset the exhaust hood: Try resetting the exhaust hood by turning off the power and then turning it back on. This can help resolve any temporary issues with the lighting adjustment function. 5. Contact customer support: If the brightness of the lighting is still not adjustable after following these steps, it is recommended to contact Bosch customer support for further assistance. They can provide specific troubleshooting steps or arrange for a service technician to inspect the exhaust hood. By following these steps, you can troubleshoot and resolve the issue of the brightness of the lighting not being adjustable in the Bosch Serie 8 DFS067K50 exhaust hood.
To troubleshoot if the audible signal of the Bosch Serie 8 DFS067K50 exhaust hood is not turning on/off as expected, follow these steps: 1. Check the audible signal settings: Ensure that the audible signal settings are properly configured. Some models may have separate controls for the audible signal. Verify that the signal is not deactivated or set to a low volume level. 2. Test the audible signal switch: Press the audible signal switch or button to check if it is functioning properly. If the switch feels loose or unresponsive, it may need to be repaired or replaced. 3. Verify the power supply: Ensure that the exhaust hood is properly connected to a power source and that the power supply is functioning correctly. Check if the power cord is securely plugged into the outlet. 4. Reset the exhaust hood: Try resetting the exhaust hood by turning off the power and then turning it back on. This can help resolve any temporary issues with the audible signal function. 5. Contact customer support: If the audible signal still does not turn on/off as expected after following these steps, it is recommended to contact Bosch customer support for further assistance. They can provide specific troubleshooting steps or arrange for a service technician to inspect the exhaust hood. By following these steps, you can troubleshoot and resolve the issue of the audible signal not turning on/off as expected in the Bosch Serie 8 DFS067K50 exhaust hood.
To troubleshoot if the # and C symbols are not activating/deactivating the audible signal in the Bosch Serie 8 DFS067K50 exhaust hood, follow these steps: 1. Check the control panel: Ensure that the control panel is not locked or in standby mode. Some models have a lock feature to prevent accidental changes. Verify that the control panel is unlocked and responsive. 2. Test the # and C symbols: Press and hold the # and C symbols simultaneously for approximately three seconds when the fan is switched off. This should activate the audible signal as an acknowledgement. If the symbols are not responding, try pressing them firmly or cleaning the control panel surface. 3. Verify the power supply: Ensure that the exhaust hood is properly connected to a power source and that the power supply is functioning correctly. Check if the power cord is securely plugged into the outlet. 4. Reset the exhaust hood: Try resetting the exhaust hood by turning off the power and then turning it back on. This can help resolve any temporary issues with the control panel or the audible signal function. 5. Contact customer support: If the # and C symbols still do not activate/deactivate the audible signal after following these steps, it is recommended to contact Bosch customer support for further assistance. They can provide specific troubleshooting steps or arrange for a service technician to inspect the exhaust hood. By following these steps, you can troubleshoot and resolve the issue of the # and C symbols not activating/deactivating the audible signal in the Bosch Serie 8 DFS067K50 exhaust hood.
Yes, the manual of the Bosch Serie 8 DFS067K50 is available in English .
Is your question not listed? Ask your question here
No results
Need help?
Do you have a question about the Bosch and is the answer not in the manual?
Question and answer
Number of questions: 0