Bosch Serie 6 DWK67JQ60 manual

Bosch Serie 6 DWK67JQ60
8.5 · 2
PDF manual
 · 20 pages
English
manualBosch Serie 6 DWK67JQ60
[en] Instructions for installation
and use

Extractor hood

View the manual for the Bosch Serie 6 DWK67JQ60 here, for free. This manual comes under the category exhaust hoods and has been rated by 2 people with an average of a 8.5. This manual is available in the following languages: English. Do you have a question about the Bosch Serie 6 DWK67JQ60 or do you need help? Ask your question here

Need help?

Do you have a question about the Bosch and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

General
BrandBosch
ModelSerie 6 DWK67JQ60 | DWK67JQ60
Productexhaust hood
EAN4242002946740
LanguageEnglish
FiletypeUser manual (PDF), Energy label (PDF)
Performance
Maximum extraction power730 m³/h
Type of extractionDucted/Recirculating
Fluid dynamic efficiency classA
Lighting efficiency classA
Grease filtering efficiency classB
Maximum recirculating power560 m³/h
Number of speeds5
Intensive speedYes
Noise level54 dB
Noise level (intensive speed)64 dB
Minimum distance from electric hob450 mm
Minimum distance from gas hob600 mm
Design
TypeWall-mounted
Product colorBlack, Stainless steel
Control typeTouch
Built-in displayNo
Cord length1.3 m
Number of motors1
Exhaust connection diameter150 mm
Compatible productsCE, VDE
Lighting
Number of bulbs2 bulb(s)
Bulb typeLED
Illuminance230 lx
Bulb power1.5 W
Filtering
Grease filter typeAluminum
Dishwasher proof filterYes
Washable filterYes
Power
Energy efficiency classA+
Connected load143 W
Motor power- W
AC input voltage220-240 V
AC input frequency50 - 60 Hz
Current10 A
Annual energy consumption26.3 kWh
Weight & dimensions
Width590 mm
Depth499 mm
Height- mm
Height (min)928 mm
Height (max)1198 mm
Height without chimney323 mm
Weight17000 g
show more

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Bosch Serie 6 DWK67JQ60 below.

What is the weight of the Bosch Serie 6 DWK67JQ60?

The Bosch Serie 6 DWK67JQ60 has a weight of 17000 g.

When should I replace the carbon filter on my extractor hood?

The carbon filter should be replaced every three to twelve months.

How often should I clean the metal hood grease filters?

The metal grease filters should be cleaned every eight to ten weeks.

Where can I find the model number of my cooker ectractor hood?

The model number of the hood is usually found on a white label inside the hood.

What is the height of the Bosch Serie 6 DWK67JQ60?

The Bosch Serie 6 DWK67JQ60 has a height of - mm.

What is the width of the Bosch Serie 6 DWK67JQ60?

The Bosch Serie 6 DWK67JQ60 has a width of 590 mm.

What is the depth of the Bosch Serie 6 DWK67JQ60?

The Bosch Serie 6 DWK67JQ60 has a depth of 499 mm.

What energy label does the Bosch Serie 6 DWK67JQ60 have?

The Bosch Serie 6 DWK67JQ60 has energy label A+.

What is the maximum extraction power of the Bosch Serie 6 DWK67JQ60?

The maximum extraction power of the Bosch Serie 6 DWK67JQ60 is 730 m³/h. This means it has a high capacity to extract smoke, steam, and odors from the kitchen, making it suitable for larger cooking spaces or for users who require powerful ventilation.

Does the Bosch Serie 6 DWK67JQ60 have a ducted and recirculating extraction option?

Yes, the Bosch Serie 6 DWK67JQ60 offers both ducted and recirculating extraction options. This versatility allows users to choose the most suitable method according to their kitchen setup or personal preferences.

What is the grease filtering efficiency class of the Bosch Serie 6 DWK67JQ60?

The grease filtering efficiency class of the Bosch Serie 6 DWK67JQ60 is B. While not the highest rating, it still indicates that the hood is effective in capturing grease particles, ensuring cleaner cooking environment and helping to prolong the life of the ventilation system.

Does the Bosch Serie 6 DWK67JQ60 have an intensive speed setting?

Yes, the Bosch Serie 6 DWK67JQ60 has an intensive speed setting. This feature allows for a boost in extraction power when cooking emits higher levels of smoke or odors. It provides a quick and efficient solution to eliminate unwanted fumes.

What is the noise level of the Bosch Serie 6 DWK67JQ60 during intensive speed?

The noise level of the Bosch Serie 6 DWK67JQ60 during intensive speed is 64 dB. While this might not be the quietest option available, it is still within a reasonable range for most users, especially considering the higher extraction power provided by the intensive speed setting.

How do I switch on and off the Bosch Serie 6 DWK67JQ60 exhaust hood?

To switch on and off the Bosch Serie 6 DWK67JQ60 exhaust hood, follow these steps: 1. Switching on: - Touch and hold the "#" and "y" symbols at the same time for approximately 3 seconds when the fan is switched off. - An audible signal will sound as an acknowledgement. 2. Switching off: - Touch and hold the "#" and "y" symbols at the same time for approximately 3 seconds when the fan is switched off. - An audible signal will sound as an acknowledgement. Please note that these instructions are specific to the Bosch Serie 6 DWK67JQ60 exhaust hood. Make sure to follow the steps accurately to ensure proper operation of the appliance.

Why is the fan not working on my Bosch Serie 6 DWK67JQ60 exhaust hood?

The fan on the Bosch Serie 6 DWK67JQ60 exhaust hood may not be working due to various reasons. Here are some troubleshooting steps to identify and resolve the issue: 1. Check the power supply: Ensure that the exhaust hood is properly connected to a power source and that the power supply is functioning correctly. Check if the power cord is securely plugged in. 2. Check the control panel: Make sure that the control panel is not locked or in a standby mode. If it is, unlock or activate the control panel according to the instructions in the manual. 3. Check the fan settings: Verify that the fan is set to an appropriate speed. Use the control panel to adjust the fan setting to a higher level and see if the fan starts working. If it does not, try different fan settings to troubleshoot the issue. 4. Check for any obstructions: Inspect the exhaust hood and the fan area for any obstructions, such as debris or grease buildup. Clean the filters and remove any blockages that may be preventing the fan from operating properly. 5. Contact customer support: If the above steps do not resolve the issue, it is recommended to contact Bosch customer support for further assistance. They can provide specific troubleshooting guidance or arrange for a service technician to inspect and repair the exhaust hood if necessary. Please note that these steps are general troubleshooting suggestions and may vary depending on the specific model and configuration of the Bosch Serie 6 DWK67JQ60 exhaust hood.

How do I use the intensive setting on the Bosch Serie 6 DWK67JQ60 exhaust hood?

To use the intensive setting on the Bosch Serie 6 DWK67JQ60 exhaust hood, follow these steps: 1. Switching on the intensive setting: - Touch the "C" or "D" symbol on the control panel. - The intensive setting is used when there is a large build-up of odors and fumes/vapors during cooking. 2. Automatic switch back to fan setting 3: - After approximately 6 minutes, the exhaust hood will automatically switch back to fan setting 3. 3. Switching off the intensive setting: - If you want to end the intensive mode before the preset time expires, touch the symbol for the required fan setting. Please note that the intensive setting is designed to provide extra power and airflow to effectively remove strong odors and fumes. It is recommended to use this setting only when necessary, as it consumes more energy.

How do I adjust the glass front on the Bosch Serie 6 DWK67JQ60 exhaust hood?

To adjust the glass front on the Bosch Serie 6 DWK67JQ60 exhaust hood, follow these steps: 1. Open the glass front: Slowly and fully open the glass front by holding it in the center and gripping it firmly. Be cautious when opening to avoid any accidents. 2. Swing down the metal grease filter: Open the lock and swing down the metal grease filter. Use your other hand to hold the metal grease filter from underneath. 3. Remove the metal grease filter: Take the metal grease filter out of the holder. Ensure that the filter is clean and free from any grease buildup. Please note that the glass front is designed to provide access to the metal grease filter for cleaning and maintenance purposes. It is important to regularly clean the metal grease filter to prevent the risk of fire and maintain the performance of the exhaust hood. These instructions are specific to the Bosch Serie 6 DWK67JQ60 exhaust hood. Follow the steps carefully to adjust the glass front properly.

Why is the fan run-on time not working on my Bosch Serie 6 DWK67JQ60 exhaust hood?

If the fan run-on time is not working on your Bosch Serie 6 DWK67JQ60 exhaust hood, there could be a few possible reasons. Here are some troubleshooting steps to help identify and resolve the issue: 1. Check the settings: Ensure that the fan run-on time setting is enabled. Use the control panel to access the settings menu and verify that the fan run-on time is set to a desired duration. 2. Check the fan run-on time delay: The fan run-on time may have a delay before it starts. Wait for a few minutes after turning off the exhaust hood to see if the fan run-on time activates. 3. Check for any obstructions: Inspect the exhaust hood and the fan area for any obstructions, such as debris or grease buildup. Clean the filters and remove any blockages that may be affecting the fan run-on time. 4. Reset the appliance: If the above steps do not resolve the issue, try resetting the exhaust hood. Turn off the power supply to the hood for a few minutes, then turn it back on and test the fan run-on time again. If the problem persists, it is recommended to contact Bosch customer support for further assistance. They can provide specific troubleshooting guidance or arrange for a service technician to inspect and repair the exhaust hood if necessary.

How do I manage the lighting on the Bosch Serie 6 DWK67JQ60 exhaust hood?

To manage the lighting on the Bosch Serie 6 DWK67JQ60 exhaust hood, follow these steps: 1. Switching the lighting on and off: Use the control panel to independently switch the lighting on and off. Look for the lighting symbol on the control panel and press the corresponding button to toggle the lighting. 2. Adjusting the brightness: If the exhaust hood has adjustable lighting brightness, use the control panel to adjust it. Look for the brightness control symbol on the control panel and press the corresponding button to increase or decrease the brightness level. 3. Selecting different lighting modes: Some models may offer different lighting modes, such as ambient lighting or task lighting. Refer to the control panel and look for the lighting mode symbol. Press the corresponding button to cycle through the available lighting modes. Please note that the specific lighting features and controls may vary depending on the model of the Bosch Serie 6 DWK67JQ60 exhaust hood. Refer to the control panel and symbols on your specific model for accurate operation.

How can I save energy while using the Bosch Serie 6 DWK67JQ60 exhaust hood?

To save energy while using the Bosch Serie 6 DWK67JQ60 exhaust hood, follow these tips: 1. Ensure sufficient air supply: During cooking, make sure there is enough air supply to the exhaust hood. This allows the hood to work efficiently and with a lower level of operating noise. 2. Adjust fan speed: Set the fan speed to match the intensity of the cooking fumes. Using a lower fan speed consumes less energy. Only use the intensive mode when necessary for strong cooking fumes. 3. Switch off when not needed: Turn off the exhaust hood and lighting when they are no longer required. This helps to conserve energy. 4. Clean and replace filters: Regularly clean and, if needed, replace the filters to increase the effectiveness of the ventilation system and prevent the risk of fire. By following these energy-saving practices, you can optimize the efficiency of the Bosch Serie 6 DWK67JQ60 exhaust hood while reducing energy consumption.

How do I ensure sufficient air supply for the Bosch Serie 6 DWK67JQ60 exhaust hood?

To ensure sufficient air supply for the Bosch Serie 6 DWK67JQ60 exhaust hood, follow these steps: 1. Adequate incoming air: It is important to ensure that there is enough fresh air in the room where the exhaust hood is installed. This is especially crucial when the hood is operated in exhaust air mode simultaneously with room air-dependent heat-producing appliances, such as gas or oil heaters. 2. Avoid partial vacuum: When the exhaust hood extracts air from the kitchen and neighboring rooms, it can create a partial vacuum if there is not enough fresh air supplied. This can lead to the backflow of toxic gases from the chimney or extraction shaft into the living space. To prevent this, make sure there are openings that allow the air needed for combustion to enter, such as doors, windows, or incoming/exhaust air wall boxes. 3. Consult a professional: It is recommended to consult a responsible Master Chimney Sweep who can assess the ventilation setup of your house and suggest suitable ventilation measures to ensure safe operation. By following these steps, you can ensure sufficient air supply for the Bosch Serie 6 DWK67JQ60 exhaust hood and maintain proper ventilation in your kitchen.

How do I adjust the fan speed on the Bosch Serie 6 DWK67JQ60 exhaust hood?

To adjust the fan speed on the Bosch Serie 6 DWK67JQ60 exhaust hood, follow these steps: 1. Control panel model 1: - Switching on: Touch the "#" symbol. The fan starts at fan setting 2. - Selecting the fan setting: Touch symbol 1, 2, or 3 to set a different fan setting. - Switching off: Touch the "#" symbol. 2. Control panel model 2: - Switching on: Touch the "#" symbol. The fan starts at fan setting 2. - Selecting the fan setting: Touch symbol 1, 2, or 3 to set a different fan setting. - Switching off: Touch the "#" symbol. Please note that the specific control panel model may vary depending on your Bosch Serie 6 DWK67JQ60 exhaust hood. Refer to the control panel symbols and buttons on your specific model for accurate operation. By following these steps, you can easily adjust the fan speed on your Bosch Serie 6 DWK67JQ60 exhaust hood to match your ventilation needs during cooking.

How do I switch off the hood and lighting when not needed on the Bosch Serie 6 DWK67JQ60 exhaust hood?

To switch off the hood and lighting when not needed on the Bosch Serie 6 DWK67JQ60 exhaust hood, follow these steps: 1. Hood: - Locate the power switch or control panel on the exhaust hood. - Look for the power symbol or switch symbol. - Press or toggle the power switch to the "Off" position to switch off the hood. 2. Lighting: - On the control panel, locate the lighting symbol or button. - Press the lighting symbol or button to switch off the lighting. By following these steps, you can easily switch off the hood and lighting of the Bosch Serie 6 DWK67JQ60 exhaust hood when they are not needed. This helps conserve energy and ensures that the hood and lighting are not running unnecessarily.

How do I switch between exhaust air mode and circulating-air mode on the Bosch Serie 6 DWK67JQ60 exhaust hood?

To switch between exhaust air mode and circulating-air mode on the Bosch Serie 6 DWK67JQ60 exhaust hood, follow these steps: 1. Switching to exhaust air mode: - Ensure that the exhaust hood is connected and switched off. - Touch and hold the "D" symbol on the control panel. - While holding the "D" symbol, touch the "1" symbol. - Release the "D" symbol. - This will switch the electronic controller over to exhaust air mode. 2. Switching to circulating-air mode: - Ensure that the exhaust hood is connected and switched off. - Touch and hold the "D" symbol on the control panel. - While holding the "D" symbol, touch the "2" symbol for filters that cannot be regenerated, or touch the "3" symbol for filters that can be regenerated. - Release the "D" symbol. - This will switch the electronic controller over to circulating-air mode. 3. Switching back to exhaust air mode: - If you want to switch back to exhaust air mode after being in circulating-air mode, repeatedly touch and hold the "D" symbol and touch the "1" symbol. - This will switch the electronic controller back to exhaust air mode. Please note that these steps are specific to the Bosch Serie 6 DWK67JQ60 exhaust hood. Follow the instructions carefully to switch between the different modes according to your ventilation needs.

How do I convey the exhaust air on the Bosch Serie 6 DWK67JQ60 exhaust hood?

To convey the exhaust air on the Bosch Serie 6 DWK67JQ60 exhaust hood, follow these steps: 1. Exhaust air mode: - Ensure that the exhaust hood is properly installed and connected. - The air drawn in by the exhaust hood is cleaned by the grease filters and conveyed to the exterior through a pipe system. - It is important to note that the exhaust air must not be conveyed into a functioning smoke or exhaust gas flue or into a shaft used to ventilate rooms with heat-producing appliances. - If you wish to convey the exhaust air into a non-functioning smoke or exhaust gas flue, you must obtain the consent of the responsible heating engineer. 2. Circulating-air mode: - In circulating-air mode, the air drawn in by the exhaust hood is cleaned by the grease filters and an activated carbon filter. - To operate the appliance in circulating-air mode, you need to install an activated carbon filter. The different options for operating the appliance in circulating-air mode can be found in the brochure or by consulting your dealer. - The required accessories, including the activated carbon filter, are available from specialist retailers, customer service, or the Online Shop. Please note that these steps are specific to the Bosch Serie 6 DWK67JQ60 exhaust hood. Follow the instructions carefully to ensure proper ventilation mode according to your needs.

How do I install an activated carbon filter for circulating-air mode on the Bosch Serie 6 DWK67JQ60 exhaust hood?

To install an activated carbon filter for circulating-air mode on the Bosch Serie 6 DWK67JQ60 exhaust hood, follow these steps: 1. Ensure that the exhaust hood is switched off and disconnected from the power supply. 2. Locate the metal grease filter(s) inside the exhaust hood. Remove the metal grease filter(s) by unlocking and swinging them down. 3. Install the activated carbon filter in the designated area behind the metal grease filter(s). Make sure it is securely in place. 4. Swing the metal grease filter(s) back up and lock them into position. 5. Switch on the exhaust hood and verify that the activated carbon filter is properly installed by checking the display or indicator on the control panel. Please note that the specific installation process may vary depending on the model of the Bosch Serie 6 DWK67JQ60 exhaust hood. Refer to the instructions provided in the manual for accurate installation steps.

What does the metal grease filter/activated charcoal filter saturation indicator symbol mean on the Bosch Serie 6 DWK67JQ60 exhaust hood?

The metal grease filter/activated charcoal filter saturation indicator symbol on the Bosch Serie 6 DWK67JQ60 exhaust hood serves to indicate the saturation level of the filters. Here is what the symbols mean: - Metal grease filter: The symbol for the metal grease filter saturation indicator is "E". When this symbol flashes after the appliance is switched off, it indicates that the metal grease filter is saturated and needs to be cleaned. - Activated charcoal filter: The symbol for the activated charcoal filter saturation indicator is "F". When this symbol flashes after the appliance is switched off, it indicates that the activated charcoal filter is saturated and needs to be replaced. - Metal grease filter and activated charcoal filter: The symbols "E" and "F" flashing together indicate that both the metal grease filter and the activated charcoal filter are saturated and need attention. The metal grease filter should be cleaned, and the activated charcoal filter should be replaced. To reset the saturation indicators, simply touch the appropriate symbol on the control panel. Please note that regular maintenance of the filters is important to ensure the proper functioning of the exhaust hood. Refer to the "Cleaning and maintenance" section in the manual for detailed instructions on how to clean the metal grease filter and replace the activated charcoal filter.

How do I independently switch the lighting on and off on the Bosch Serie 6 DWK67JQ60 exhaust hood?

To independently switch the lighting on and off on the Bosch Serie 6 DWK67JQ60 exhaust hood, follow these steps: 1. Locate the lighting control on the control panel of the exhaust hood. 2. To switch on the lighting, press the lighting symbol or button on the control panel. The lighting will turn on. 3. To switch off the lighting, press the lighting symbol or button again. The lighting will turn off. Please note that the lighting control on the Bosch Serie 6 DWK67JQ60 exhaust hood allows you to independently control the lighting without affecting the operation of the hood itself. This feature provides flexibility in using the lighting according to your needs, whether it is for additional illumination during cooking or for ambient lighting in the kitchen.

How do I adjust the brightness of the lighting on the Bosch Serie 6 DWK67JQ60 exhaust hood?

To adjust the brightness of the lighting on the Bosch Serie 6 DWK67JQ60 exhaust hood, follow these steps: 1. Switch on the lighting: Press the lighting symbol or button on the control panel to switch on the lighting. 2. Adjust the brightness: Press and hold the lighting symbol or button until the desired brightness level is reached. The brightness will gradually increase or decrease as you continue to hold the button. 3. Release the button: Once you have achieved the desired brightness level, release the lighting symbol or button. The lighting will remain at the adjusted brightness level until you change it again. Please note that the specific control panel layout and symbols may vary depending on the model of the Bosch Serie 6 DWK67JQ60 exhaust hood. Refer to the control panel of your specific model for accurate operation and adjustment of the lighting brightness.

Is the manual of the Bosch Serie 6 DWK67JQ60 available in English?

Yes, the manual of the Bosch Serie 6 DWK67JQ60 is available in English .

Is your question not listed? Ask your question here

No results