View the manual for the Bosch Sensixx'x DA70 SensorSecure i-Temp TDA703021I here, for free. This manual comes under the category irons and has been rated by 1 people with an average of a 6.4. This manual is available in the following languages: English. Do you have a question about the Bosch Sensixx'x DA70 SensorSecure i-Temp TDA703021I or do you need help? Ask your question here
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Bosch Sensixx'x DA70 SensorSecure i-Temp TDA703021I below.
A high wattage iron heats up faster.
Soak a cloth in vinegar and put your iron on the cloth for half an hour so that the vinegar can absorb into the stains. You can then remove the stains with a damp cloth.
Yes, irons are in principle only suitable for tap water.
To ensure the Bosch Sensixx'x DA70 SensorSecure i-Temp TDA703021I iron is not left unattended while connected to the supply mains, follow these steps: 1. Do not leave the iron unattended while it is connected to the supply mains. 2. Always remove the plug from the socket before filling the iron with water or pouring out the remaining water after use. 3. Place the iron on a stable surface when in use. 4. Ensure that the surface where the iron stand is placed is stable. 5. Do not use the iron if it has been dropped, shows visible damage, or is leaking water. Have it checked by an authorized Technical Service Centre before use. 6. Any necessary work or repairs on the iron should only be done by qualified personnel from an Authorized Technical Service Centre. 7. Keep the iron and its cord out of reach of children under 8 years old when it is energized or cooling down.
If the Bosch Sensixx'x DA70 SensorSecure i-Temp TDA703021I iron has been dropped, shows visible signs of damage, or is leaking water, follow these steps: 1. Check the temperature control setting and adjust it if necessary. 2. Grip the handle of the iron to restart it if the "SensorSecure" system has been activated. 3. Ensure that the soleplate is heating up or cooling down to the selected temperature if the "TempOK" lights are flashing. 4. Adjust the temperature control to a higher setting and wait for the lights inside the temperature control to stop flashing. 5. Set the steam regulator to a lower setting if water is dripping out with steam. 6. Wait for 5 seconds between each press of the shot of steam button. 7. If the issue persists, contact an authorized technical service.
Yes, the manual of the Bosch Sensixx'x DA70 SensorSecure i-Temp TDA703021I is available in English .
Is your question not listed? Ask your question here
No results
Need help?
Do you have a question about the Bosch and is the answer not in the manual?
Question and answer
Number of questions: 0