• This appliance has been designed exclusively for domestic use
and must not be used for industrial purposes.
• This appliance reaches high temperatures and produces steam
during use, this could cause scalds or burns in case of improper
use.
- Do not touch the soleplate! Hold the iron by its handle.
- Do not leave the power cable hanging over the table or ironing
board, to prevent the appliance from falling.
- Do not iron clothing while it is being worn!
- Never spray or aim the steam at persons or animals!
• Do not allow the power cable to come into contact with sharp
edges or with the soleplate when it is hot.
• Never rest the iron in a horizontal position when the soleplate
is hot. Rest it on its heel.
• Do not touch the appliance with wet hands when in operation.
• This appliance is to be connected and used in accordance with
the information stated on its characteristics plate.
• This appliance must be connected to an earthed socket. If it is
absolutely necessary to use an extension cable, make sure that
it is suitable for 16A and has a socket with an earth connection.
• In order to avoid that, under unfavourable mains conditions,
phenomena like transient voltage drops or lighting fluctuations
can happen, it is recommended that the iron is connected to a
power supply system with a maximum impedance of 0.26Ω. If
necessary, the user can ask the public power supply company
for the system impedance at the interface point.
• The appliance must never be placed directly under the tap to
fill the water tank.
• Unplug the appliance from the mains supply after each use, or
if a fault is suspected.
• The electrical plug must not be removed from the socket by
pulling the cable.
• Never immerse the iron in water or any other fluid.
• Do not leave the appliance exposed to weather conditions (rain,
sun, frost, etc.).
• If the safety fuse fitted in the appliance blows, the appliance
will be rendered inoperative. To restore normal operation the
appliance will have to be taken to an authorised Technical
Service Centre.
Tips to help you save energy
Steam production consumes the most energy. To help minimise
the energy used, follow the advice below:
• Regulate the steam according to the selected ironing
temperature, following the instructions in this manual.
• Try to Iron the fabrics while they are still damp and reduce the
steam setting. Steam will be generated from the fabrics rather
than the iron. If you tumble dry your fabrics before ironing them,
set the tumble drier on the ‘iron dry’ programme.
• Stand the iron upright during pauses. Resting it horizontally with
the steam regulator on generates wasted steam.
GUARANTEE TERMS
The terms of the guarantee for this appliance are in accordance
with that stated by our representative for the country in which
it is sold. Details of those conditions can be obtained from the
retailer from whom the appliance was purchased. The SALES
RECEIPT must be presented when making any claims against the
terms of this guarantee. We reserve the right to make technical
modifications.
Advice on disposal
Our goods come in optimised packaging. This basically consists in
using non-contaminating materials which should be handed over
to the local waste disposal service as secondary raw materials.
Your local town council can give you information about how to
dispose of obsolete appliances.
This appliance is labelled in accordance with
European Directive 2012/19/EU concerning used
electrical and electronic appliances (waste
electrical and electronic equipment -WEEE).
The guideline determines the framework for
the return and recycling of used appliances as applicable
throughout the EU.
View the manual for the Bosch Sensixx'x DA10 here, for free. This manual comes under the category irons and has been rated by 6 people with an average of a 8.5. This manual is available in the following languages: English. Do you have a question about the Bosch Sensixx'x DA10 or do you need help? Ask your question here
Need help?
Do you have a question about the Bosch and is the answer not in the manual?
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Bosch Sensixx'x DA10 below.
What does the wattage on my iron say?
A high wattage iron heats up faster.
How do I remove stains on the soleplate?
Soak a cloth in vinegar and put your iron on the cloth for half an hour so that the vinegar can absorb into the stains. You can then remove the stains with a damp cloth.
Can I use tap water in my iron?
Yes, irons are in principle only suitable for tap water.
Why is the iron not heating up at all?
Check if the power cord is securely plugged into a functioning electrical outlet. If the iron is properly connected and still not heating up, it might need to be serviced by a professional technician.
How do I adjust the temperature settings on the iron?
The temperature setting knob is typically located on the handle or control panel of the iron. Rotate the knob to select the desired temperature according to the fabric type you are ironing. Higher numbers generally indicate higher heat settings.
Why is the iron leaking water during use?
Ensure that the water tank is not overfilled, as excessive water can cause leakage. Also, check if the iron is set on the appropriate steam setting for your current ironing needs. If the issue persists, try cleaning the steam vents or consult an authorized service center.
Can I use tap water in the iron's water tank?
It is recommended to use distilled or demineralized water to prevent mineral build-up within the iron. However, if you only have access to tap water, it is advisable to mix it with distilled water in a 50/50 ratio to minimize potential scale formation.
How do I clean the iron's soleplate?
Make sure the iron is unplugged and cooled down. Dampen a cloth or sponge with a mild detergent or vinegar solution and gently wipe the soleplate. Avoid using abrasive materials or harsh chemicals that can damage the soleplate. Afterwards, wipe it clean with a dry cloth.
Does the Bosch Sensixx'x DA10 have an auto power off feature?
Yes, the Bosch Sensixx'x DA10 has an auto power off feature. This means that the iron will automatically turn off after a certain period of inactivity, providing safety and saving energy for the user.
What type of soleplate does the Bosch Sensixx'x DA10 have?
The Bosch Sensixx'x DA10 has a Palladium soleplate. This type of soleplate is known for its smooth gliding and excellent heat distribution, which ensures efficient and effective ironing.
Does the Bosch Sensixx'x DA10 have a steam boost function?
Yes, the Bosch Sensixx'x DA10 has a steam boost function. This allows the user to generate a powerful burst of steam, which is especially useful for removing stubborn wrinkles or for vertical steaming.
Does the Bosch Sensixx'x DA10 have an automatic anti-calc feature?
Yes, the Bosch Sensixx'x DA10 has an automatic anti-calc feature. This means that the iron will automatically remove limescale from the steam chamber, prolonging the lifespan of the iron and ensuring consistent steam performance.
What is the power of the Bosch Sensixx'x DA10?
The Bosch Sensixx'x DA10 has a power of 2400 W. This high power rating allows for quick heating and efficient steam production, making ironing faster and easier for the user.
Is the manual of the Bosch Sensixx'x DA10 available in English?
Yes, the manual of the Bosch Sensixx'x DA10 is available in English .
Need help?
Do you have a question about the Bosch and is the answer not in the manual?
Question and answer
Number of questions: 0