View the manual for the Bosch Sensixx B25L professional TDS25PRO2 here, for free. This manual comes under the category irons and has been rated by 2 people with an average of a 9.1. This manual is available in the following languages: English. Do you have a question about the Bosch Sensixx B25L professional TDS25PRO2 or do you need help? Ask your question here
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Bosch Sensixx B25L professional TDS25PRO2 below.
A high wattage iron heats up faster.
Soak a cloth in vinegar and put your iron on the cloth for half an hour so that the vinegar can absorb into the stains. You can then remove the stains with a damp cloth.
Yes, irons are in principle only suitable for tap water.
To ensure the steam ironing system of the Bosch Sensixx B25L professional TDS25PRO2 is properly connected to an earthed socket, follow these steps: 1. Check the characteristics plate of the appliance for information on how to connect and use it. 2. Make sure the iron is connected to an earthed socket. If you need to use an extension cable, ensure that it is suitable for 16A and has an earth connection. 3. Inspect the iron for any visible signs of damage before use. If you notice any damage, do not use the iron and have it checked by an authorized Technical Service Centre. 4. If the safety fuse in the appliance blows, rendering it inoperative, take the iron to an authorized Technical Service Centre to restore normal operation. 5. To prevent voltage drops or fluctuations, connect the iron to a power supply system with a maximum impedance of 0.27 Ω. You can contact the public power supply company for information on the system impedance at the interface point. By following these steps, you can ensure that the steam ironing system of the Bosch Sensixx B25L professional TDS25PRO2 is properly connected to an earthed socket, ensuring safe and efficient operation.
If you notice any visible signs of damage on the Bosch Sensixx B25L professional TDS25PRO2 iron, follow these steps: 1. Stop using the iron immediately if you notice any visible signs of damage, such as cracks, frayed cords, or loose parts. 2. Disconnect the iron from the power source by unplugging it from the socket. 3. Do not attempt to repair the iron yourself. Contact an authorized Technical Service Centre for assistance. 4. Provide the service centre with detailed information about the visible signs of damage and any other relevant information. 5. Follow the instructions provided by the service centre for further assessment and repair of the iron. 6. Do not use the iron until it has been inspected and repaired by a qualified technician to ensure safe operation. By following these steps, you can address any visible signs of damage on the Bosch Sensixx B25L professional TDS25PRO2 iron and ensure the safety and proper functioning of the appliance.
To remove and refill the water tank of the Bosch Sensixx B25L professional TDS25PRO2 iron, follow these steps: 1. Ensure that the iron is unplugged and cooled down before handling the water tank. 2. Locate the removable water tank on the iron. It is usually located at the front or side of the iron. 3. Hold the water tank firmly and lift it upwards to remove it from the iron. 4. Take the water tank to a sink or faucet for refilling. 5. Open the water tank cap or lid to access the filling opening. 6. Fill the water tank with clean tap water or a mixture of tap water and distilled water, following the maximum fill level indicated on the tank. 7. Close the water tank cap or lid securely to prevent any water from leaking. 8. Insert the filled water tank back into the iron, ensuring it is properly aligned and securely attached. 9. You can now plug in the iron and use it for steam ironing. By following these steps, you can easily remove and refill the water tank of the Bosch Sensixx B25L professional TDS25PRO2 iron, ensuring a continuous supply of steam during ironing.
If the steam ready pilot light on the Bosch Sensixx B25L professional TDS25PRO2 iron is not turning on, you can try the following steps to troubleshoot the issue: 1. Check the main power button and ensure it is switched on. The steam generator will not come on if the main power button is not activated. 2. Verify that the water tank is filled with enough water. If the water level is too low, the steam ready pilot light may not turn on. 3. Make sure the temperature control knob is set to the appropriate position. If it is set to the "min" position, the iron may not heat up and the steam ready pilot light will not activate. 4. Check the connection between the iron and the power source. Ensure that the mains cable is securely plugged into the socket. 5. If the issue persists, it is recommended to contact an authorized Technical Service Centre for further assistance. They will be able to provide specific troubleshooting steps or arrange for repairs if necessary. By following these steps, you can address the issue of the steam ready pilot light not turning on and ensure proper functioning of the Bosch Sensixx B25L professional TDS25PRO2 iron.
To clean and descale the Bosch Sensixx B25L professional TDS25PRO2 iron, follow these steps: 1. After ironing, unplug the iron and allow it to cool down before cleaning. 2. Wipe the housing, handle, and iron body with a damp cloth to remove any dirt or residue. 3. If the soleplate is soiled with dirt or scale, clean it with a damp cloth. Avoid using abrasive products or solvents. 4. To descale the boiler, ensure that the appliance is cold and unplugged for at least 2 hours. Empty the water tank and remove the plastic cover located on the bottom of the iron by turning it to the designated position. 5. Unscrew the boiler drainage plug located on the bottom of the iron using a coin. Hold the iron upside down and fill the boiler with 1/4 liter of water using a jug. Shake the iron for a few moments and then empty it completely over a sink or bucket. Repeat this process twice for best results. 6. Replace and tighten the boiler drainage plug with a coin. Insert and close the plastic cover by turning it to the designated position. 7. To reset the "Calc'n clean" pilot light and hours counter, switch off the iron twice, keeping it off for at least 30 seconds each time. By following these steps, you can effectively clean and descale the Bosch Sensixx B25L professional TDS25PRO2 iron, ensuring optimal performance and prolonging its lifespan.
Yes, the manual of the Bosch Sensixx B25L professional TDS25PRO2 is available in English .
Is your question not listed? Ask your question here
No results
Need help?
Do you have a question about the Bosch and is the answer not in the manual?
Question and answer
Number of questions: 0