View the manual for the Bosch Sensixx B22L TDS2241 here, for free. This manual comes under the category irons and has been rated by 1 people with an average of a 5.3. This manual is available in the following languages: English. Do you have a question about the Bosch Sensixx B22L TDS2241 or do you need help? Ask your question here
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Bosch Sensixx B22L TDS2241 below.
A high wattage iron heats up faster.
Soak a cloth in vinegar and put your iron on the cloth for half an hour so that the vinegar can absorb into the stains. You can then remove the stains with a damp cloth.
Yes, irons are in principle only suitable for tap water.
If the Bosch Sensixx B22L TDS2241 iron has been dropped, shows visible signs of damage, or is leaking water, follow these steps: 1. Check if the filter located at the side of the appliance is loose and tighten it up to prevent water leakage from the boiler. 2. If the iron does not stop steaming after placing it on the pad, it may be due to the "PulseSteam" function being activated by double-click. Simply press the trigger once again to stop the steaming. 3. If the issue persists, contact an authorized technical service for further assistance.
To ensure that the Bosch Sensixx B22L TDS2241 iron is placed on a stable surface during use, follow these steps: 1. Place the appliance horizontally on a solid, stable surface. 2. Use the iron pad provided or another solid, stable, horizontal surface to place the iron on. 3. Ensure that the iron is not resting on its heel but positioned horizontally on the iron pad. 4. Avoid placing the iron on the appliance without the iron pad. 5. Always position the iron on a stable surface to prevent any accidents or damage. By following these steps, you can ensure that the Bosch Sensixx B22L TDS2241 iron is placed securely on a stable surface while in use.
To troubleshoot if the Bosch Sensixx B22L TDS2241 iron is not producing steam when the steam release button is pressed, follow these steps: 1. Check the main power switch (13) to ensure it is set to the “I” position. 2. Verify that the water tank is filled and the boiler is switched on. 3. Increase the steam flow by adjusting the steam regulation to a higher position. 4. Press the steam release button at intervals to prevent loss of pressure during ironing. 5. If water spots appear on the garment, wipe the ironing board cover and iron any water drops to dry them. 6. If the issue persists, contact an authorized technical service for further assistance.
Yes, the manual of the Bosch Sensixx B22L TDS2241 is available in English .
Is your question not listed? Ask your question here
No results
Need help?
Do you have a question about the Bosch and is the answer not in the manual?
Question and answer
Number of questions: 0