View the manual for the Bosch Sensixx B20L TDS2012 here, for free. This manual comes under the category irons and has been rated by 2 people with an average of a 8. This manual is available in the following languages: English. Do you have a question about the Bosch Sensixx B20L TDS2012 or do you need help? Ask your question here
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Bosch Sensixx B20L TDS2012 below.
A high wattage iron heats up faster.
Soak a cloth in vinegar and put your iron on the cloth for half an hour so that the vinegar can absorb into the stains. You can then remove the stains with a damp cloth.
Yes, irons are in principle only suitable for tap water.
Make sure that the water tank is filled with enough water and properly inserted into the iron. Check that the steam setting is appropriately selected, as lower settings may not produce visible steam. Additionally, ensure that the steam button is pressed and held down long enough to allow steam to be generated.
Firstly, avoid overfilling the water tank beyond the maximum level indicated. Make sure the iron is not stored horizontally or tipped over when hot or in use, as this can cause water to leak. If you notice excess water accumulation, try adjusting the iron's temperature or steam settings to avoid condensation build-up and potential leakage.
Verify that the iron is properly connected to a power source. Check if the power cord is securely plugged into the iron and the electrical outlet. Additionally, confirm that the temperature dial is set to the desired heat setting and allow sufficient warm-up time for the iron to reach the selected temperature.
To descale your iron, first ensure that it is completely cool and unplugged. Remove the water tank and pour out any remaining water. Mix a suitable descaling solution according to the manufacturer's instructions. Fill the water tank with the descaling solution and reattach it to the iron. Plug in the iron and switch it on, allowing it to heat up until the descaling indicator light turns off. Finally, empty and rinse the water tank thoroughly before refilling it with clean water for regular use.
It is generally recommended to use distilled or filtered water to prevent limescale build-up in your iron. However, if distilled or filtered water is not available, tap water can be used. In such cases, it is advisable to use equal parts of tap water and distilled water, or at least mix tap water with some distilled water, to reduce the risk of limescale deposits in the iron's steam chamber. Remember to descale your iron regularly to maintain optimal performance.
Yes, the manual of the Bosch Sensixx B20L TDS2012 is available in English .
Is your question not listed? Ask your question here
No results
Need help?
Do you have a question about the Bosch and is the answer not in the manual?
Question and answer
Number of questions: 0