View the manual for the Bosch Relaxxx ProSilence 66 here, for free. This manual comes under the category vacuum cleaners and has been rated by 22 people with an average of a 8.1. This manual is available in the following languages: English. Do you have a question about the Bosch Relaxxx ProSilence 66 or do you need help? Ask your question here




| Brand | Bosch |
| Model | Relaxxx ProSilence 66 | BGS5SIL66M |
| Product | vacuum cleaner |
| Language | English |
| Filetype | User manual (PDF) |
| Annual energy consumption | 27 kWh |
| Variable power | Yes |
| AC input voltage | 220-240 V |
| AC input frequency | 50 Hz |
| Power control | Electronic |
| Maximum input power | 700 W |
| Type | Cylinder vacuum |
| Dust container type | Bagless |
| Dust capacity | 3 L |
| Product color | Black |
| Tube type | Telescopic |
| Flexible hose | Yes |
| Cleaning type | Dry |
| Vacuum air filtering | GORE CleanStream filter, HEPA |
| Proper use | Home |
| Cleaning surfaces | Carpet, Hard floor |
| A | |
| C | |
| A | |
| Noise level | 66 dB |
| Operating radius | 11 m |
| Removable filter | Yes |
| Washable filter | Yes |
| Dirt separating method | Filtering |
| Cord length | 8 m |
| Automatic cord rewinder | Yes |
| On/off switch | Yes |
| Control type | Buttons, Rotary |
| Cord storage | Yes |
| Width | 310 mm |
| Depth | 470 mm |
| Height | 320 mm |
| Weight | 8600 g |
| Weight (without accessories) | 6700 g |
| Vacuum brushes included | Hard floor brush |
| Crevice tool | Yes |
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Bosch Relaxxx ProSilence 66 below.
Your Bosch vacuum cleaner losing suction power can be due to the following causes: - The suction power is not set to maximum - The dust container or dust bag is full - The hose, brush or tube is clogged
A clean filter is important to maintain the vacuum cleaner's suction power. Therefore, check the filter regularly. When a filter is clogged, dust absorption decreases and energy consumption increases.
A commonly used method is to put a little washing powder in the dust container or the dust bag.
For allergy sufferers, vacuuming the house at least twice a week is recommended.
The Bosch Relaxxx ProSilence 66 has a weight of 8600 g.
The Bosch Relaxxx ProSilence 66 has a height of 320 mm.
The Bosch Relaxxx ProSilence 66 has a width of 310 mm.
The Bosch Relaxxx ProSilence 66 has a depth of 470 mm.
Yes, the Bosch Relaxxx ProSilence 66 has variable power. This means that the user can adjust the suction power according to their cleaning needs, making it versatile for different surfaces and tasks.
The dust capacity of the Bosch Relaxxx ProSilence 66 is 3 L. This is a relatively large capacity, allowing for longer cleaning sessions without the need to frequently empty the dust container.
Yes, the Bosch Relaxxx ProSilence 66 has a flexible hose. This feature provides added maneuverability and convenience during cleaning, allowing the user to reach and clean difficult-to-access areas with ease.
The Bosch Relaxxx ProSilence 66 has GORE CleanStream filter and HEPA air filtering. This combination of filters ensures effective air filtration, capturing fine dust particles and allergens, resulting in cleaner and healthier indoor air.
The Bosch Relaxxx ProSilence 66 has a noise level of 66 dB. This is considered a relatively low noise level for a vacuum cleaner, providing a quieter cleaning experience for the user and minimizing disturbance to others.
To assemble the Bosch Relaxx´x vacuum cleaner after purchase, follow these steps: 1. Push the flexible tube adapter into the air intake opening on the appliance until you hear an audible 'click'. 2. To remove the flexible hose, press the two catches together and pull out the hose. 3. Push the handle into the telescopic tube until it locks into place. To release the connection, squeeze the collar sleeve and pull the handle out. 4. Insert the adjustable floor tool with the accessory connection into the telescopic tube. 5. Attach the accessories holder to the side of the appliance. 6. Place the dust container into the appliance and close the appliance lid. It is important to use original Bosch accessories that have been specially developed for your vacuum cleaner to achieve the best possible vacuuming results. Please refer to the instruction manual for any additional information or specific details related to your model. Note: The steps provided are a general guide and may vary slightly depending on the specific model of the Bosch Relaxx´x vacuum cleaner.
The Bosch Relaxx´x vacuum cleaner (model ProSilence 66) comes with the following parts and accessories: 1. Adjustable floor tool with accessory connection 2. Telescopic tube with sliding switch and accessory connection 3. Accessories holder 4. Flexible hose 5. Handle 6. Brush ring (to fit on the upholstery nozzle) 7. Parking aid on the side of the appliance 8. Power cord 9. Dust container 10. Upholstery nozzle 11. Crevice nozzle 12. "Clean" filter cleaning button 13. Power level indicator 14. On/Off button with electronic suction regulator 15. Appliance lid 16. Carrying handle 17. Storage aid on the underside of the appliance 18. Plate filter 19. Fluff filter 20. Floor tool for delicate hard floors, e.g. parquet 21. "powerClean Stone & Co" floor tool for hard floors with joints and gaps, e.g. tiles and floorboards Please note that the availability of specific accessories may vary depending on the model. Refer to the instruction manual for more details and any additional accessories or replacement parts that may be available for your specific model.
To properly use the Bosch Relaxx´x vacuum cleaner (model ProSilence 66) for the first time, follow these steps: 1. Push the flexible tube adapter into the air intake opening on the appliance until you hear an audible 'click'. 2. To remove the flexible hose, press the two catches together and pull out the hose. 3. Push the handle into the telescopic tube until it locks into place. To release the connection, squeeze the collar sleeve and pull the handle out. 4. Insert the adjustable floor tool with the accessory connection into the telescopic tube. 5. Attach the accessories holder to the side of the appliance. 6. Place the dust container into the appliance and close the appliance lid. 7. Plug in the power cord to a suitable power outlet. 8. Press the On/Off button to turn on the vacuum cleaner. 9. Adjust the power level using the electronic suction regulator. 10. Start vacuuming by moving the floor tool across the desired surface, ensuring thorough coverage. 11. Empty the dust container when it becomes full, following the instructions in the manual. These steps will help you properly use the Bosch Relaxx´x vacuum cleaner for the first time.
To clean the Bosch Relaxx´x vacuum cleaner (model ProSilence 66) and its plastic accessories, follow these steps: 1. Always switch off the vacuum cleaner and disconnect the power cord from the mains before cleaning. 2. Use an ordinary plastic cleaner to clean the vacuum cleaner and plastic accessories. Avoid using scourers, glass-cleaning agents, or multipurpose cleaning products. 3. Never immerse the vacuum cleaner in water. 4. Clean the dust container regularly by emptying it and wiping it with a damp cloth. Ensure it is completely dry before reinserting it. 5. Clean the plastic accessories, such as the adjustable floor tool, upholstery nozzle, and crevice nozzle, by wiping them with a damp cloth. Ensure they are completely dry before using or storing them. 6. Pay attention to any specific cleaning instructions provided in the manual for individual accessories. 7. Store the vacuum cleaner and its accessories in a clean and dry place when not in use. By following these steps, you can effectively clean the Bosch Relaxx´x vacuum cleaner and its plastic accessories, ensuring optimal performance and longevity.
When using the Bosch Relaxx´x vacuum cleaner (model ProSilence 66), there are some cautionary notes and technical modifications to be aware of: 1. The vacuum cleaner is intended for domestic use only and should not be used for commercial purposes. 2. Use only original replacement parts, accessories, or special accessories recommended by Bosch to ensure proper functioning and avoid damage. 3. Do not vacuum persons or animals, insects or spiders, hazardous or sharp-edged substances, damp or liquid substances, highly flammable or explosive substances and gases, ash or soot from tiled stoves and central heating systems, or toner dust from printers and copiers. 4. The vacuum cleaner complies with recognized safety regulations and can be used by children over the age of 8 and individuals with reduced physical, sensory, or mental capacity if supervised or instructed on safe use. 5. Do not operate the vacuum cleaner without the dust bag or dust container, motor protection filter, or exhaust filter. 6. Keep the vacuum cleaner away from your head when using nozzles and tubes to avoid injury. 7. When vacuuming stairs, position the appliance below you for safety. 8. Do not use the power cord or hose to carry or transport the vacuum cleaner. 9. If the power cord becomes damaged, it should be replaced by the manufacturer or a qualified person. 10. Pull out the power cord completely if using the appliance for longer than 30 minutes. 11. Always switch off the appliance and unplug it before carrying out any maintenance or repairs. 12. Protect the vacuum cleaner from weather, moisture, and sources of heat. 13. Do not pour flammable substances or substances containing alcohol onto the filters. 14. The vacuum cleaner is not suitable for use on construction sites. 15. At the end of its life, render the appliance unusable and dispose of it appropriately. These cautionary notes and technical modifications are important to ensure safe and proper use of the Bosch Relaxx´x vacuum cleaner.
Yes, the manual of the Bosch Relaxxx ProSilence 66 is available in English .
Is your question not listed? Ask your question here
No results
Need help?
Do you have a question about the Bosch and is the answer not in the manual?
Question and answer
Number of questions: 20Dear Sir or Madam, Why does my vacuum cleaner Bosch Relaxxx ProSilence 66 constantly stop with a red light and is weak? Kind regards, Baouch
How can I remove the inner lamella filter to clean it? Can I clean it with water, or how can I clean the lamella filter at all?
After cleaning the filters, when turning on the vacuum quickly the red light comes on, I stop it and it works for a while and so on all the time, what could be the problem? Thank you for your solution.
hello good morning. my {Bosch Relaxxx ProSilence 66} vacuum cleaner with sensor control. it sucks very little, the red selfclean light turns on, I turn it off and after a while it works without power for 2 or 3 minutes and the red light turns on again. I have cleaned the cylindrical filter with folds. everything remains the same .. I don't know what to do. please help me. thank you.
This message has been automatically translatedThe vacuum cleaner {Bosch Relaxxx ProSilence 66} keeps stopping. It makes a reeling noise and then continues to suck. It's annoying because this happens approximately every 5 minutes.
This message has been automatically translatedThree years after purchase, it doesn't work, the control sensor jumps very quickly until it stops and turns red, I have to turn it off and on again and this happens again, I have cleaned the filter several times but it continues to give me that error, what can I do?
This message has been automatically translatedAfter almost 2 years, I am having problems with the otherwise good vacuum cleaner. As already asked several times by other owners, I also have the problem that the Server Control light always comes on after a short time, after about 4 repetitions it only lights up in red and the vacuum cleaner has to be switched off so that it can continue to suck after being switched back on. Then only for a short time and the same game starts all over again! What can I do??? The device is cleaned very thoroughly after each use!!! Thank you, Greetings K.D.
This message has been automatically translatedThe vacuum cleaner is constantly going into automatic cleaning mode and stops with the red light on after three times. I have cleaned all the filters and let them dry, but it still does the same thing. What should I do? Thank you.
This message has been automatically translated