View the manual for the Bosch PST 900 PEL here, for free. This manual comes under the category saws and has been rated by 6 people with an average of a 8.7. This manual is available in the following languages: English. Do you have a question about the Bosch PST 900 PEL or do you need help? Ask your question here



The Bosch PST 900 PEL is a saw that offers an input power of 620 W and an output power of 340 W. With a cutting depth of 90 mm in wood, this saw provides a suitable option for various woodworking projects. It operates on an AC input voltage of 230 V and weighs approximately 2200 g, making it a relatively lightweight tool for easy handling. The Bosch PST 900 PEL comes with a saw blade included, allowing users to start using it right away. It features a soft grip, which adds comfort and reduces hand fatigue during prolonged use. Additionally, the tool-free blade change feature enables convenient swapping of blades without the need for extra tools. With dust extraction capability, this saw helps maintain a cleaner working environment by efficiently collecting wood dust during operation. It utilizes an AC power source, making it suitable for use in areas with access to a power outlet. In terms of vibration levels, the Bosch PST 900 PEL has a vibration level of 11.5 m/s² when cutting wood, with an uncertainty level of 4 m/s². When cutting steel, the vibration level is 8.5 m/s², with an uncertainty level of 2 m/s². These vibration levels may provide insights into the tool's overall performance and user comfort. With its reliable construction and durable materials, the Bosch PST 900 PEL is designed to withstand long-term use. It offers a convenient and efficient solution for woodworking tasks and provides the flexibility needed for various cutting applications.
| Brand | Bosch |
| Model | PST 900 PEL | 0 603 3A0 200 |
| Product | saw |
| EAN | 3165140526968 |
| Language | English |
| Filetype | User manual (PDF) |
| Input power | 620 W |
| Output power | 340 W |
| AC input voltage | 230 V |
| Power source | AC |
| Cutting depth in wood | 90 mm |
| Vibration level (wood) | 11.5 m/s² |
| Vibration level uncertainty (steel) | 2 m/s² |
| Vibration level uncertainty (wood) | 4 m/s² |
| Vibration level (steel) | 8.5 m/s² |
| Idle stroke rate (max) | 3100 spm |
| Cutting depth in steel | 8 mm |
| Idle stroke rate (min) | 500 spm |
| Weight | 2200 g |
| Saw blade included | Yes |
| Carrying case | Yes |
| Soft grip | Yes |
| Tool-free blade change | Yes |
| Product color | Black, Green, Red, Silver |
| Dust extraction | Yes |
| Bevel adjustment | Yes |
| Bevel capacity (max) | 45 ° |
| Handle type | Top handle |
| Adjustable speed | Yes |
| Orbital action | - |
| Built-in light | Yes |
| Number of speeds | 5 |
| Dust blower | Yes |
| Base plate material | Steel |
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Bosch PST 900 PEL below.
The Bosch PST 900 PEL has a weight of 2200 g.
1. Wipe sawdust from the saw blade with a brush. 2. Spray the saw blade with oven cleaner and leave for 30 minutes. 3. Remove the oven cleaner and dirt with a dry cloth. 4. Grease saw blade with Vaseline.
If there is resin or other debris on the blade, it may look like the blade is blunt. If the saw blade has been thoroughly cleaned and is still blunt, it is recommended to have the saw blade sharpened.
1. Soak the rusty part in vinegar until completely soaked through. 2. Let the vinegar work on the rust for 24 hours. 3. Remove the rust with a wire brush or aluminium foil.
The maximum achievable charge level is expressed with 16V or 20V. The V in this case stands for Volt.
The amount of sound varies a lot per brand and type of saw, it is therefore wise to wear hearing protection to be sure.
To change the blade on the Bosch PST 900 PEL, first, ensure the saw is unplugged. Then, use the provided wrench to loosen the blade screw, remove the old blade, place the new blade with the teeth facing downwards, and tighten the blade screw securely.
The maximum cutting depth of the Bosch PST 900 PEL saw is 90 millimeters when cutting into wood, and 10 millimeters when cutting into aluminum or non-alloyed steel.
To adjust the bevel angle on the Bosch PST 900 PEL, use the bevel adjustment lever located on the front of the saw. Simply release the lever, set the desired angle on the scale, and lock the lever back in place.
To prevent splintering when using the Bosch PST 900 PEL saw, ensure you are using a sharp blade appropriate for the material being cut. Additionally, consider using a sacrificial backing, such as scrap wood, to support the material and reduce splintering.
The Bosch PST 900 PEL has a fixed speed and does not offer adjustable speed settings. However, its powerful 620-watt motor provides ample cutting performance for various materials.
Yes, the Bosch PST 900 PEL has an input power of 620 W. This means that it has a relatively high power and can handle cutting through different materials with ease.
Yes, a saw blade is included with the Bosch PST 900 PEL. This means that users can start using the saw immediately without the need to purchase a separate blade.
Yes, the Bosch PST 900 PEL can be used for bevel cuts. It has a bevel capacity of up to 45°, allowing users to make angled cuts for various applications.
Yes, the Bosch PST 900 PEL has a soft grip. This feature provides comfort and reduces fatigue during prolonged use, making it easier for users to control the saw and achieve precise cuts.
Yes, the Bosch PST 900 PEL has tool-free blade change. This makes it convenient and quick for users to replace or change the saw blade without the need for additional tools.
Yes, the manual of the Bosch PST 900 PEL is available in English .
Is your question not listed? Ask your question here
No results
Need help?
Do you have a question about the Bosch and is the answer not in the manual?
Question and answer
Number of questions: 2Jigsaw pst900pel, I want to change the cable....how do I disconnect the cables and where does the white cable go?
I like this jigsaw, but a few years ago I found the blade would not fit into the plunger rod. I got a replacement rod and it worked well until the same thing happened. I went through this cycle once more. What is going on?