View the manual for the Bosch PST 700 ReadyToSaw here, for free. This manual comes under the category saws and has been rated by 1 people with an average of a 9.5. This manual is available in the following languages: English. Do you have a question about the Bosch PST 700 ReadyToSaw or do you need help? Ask your question here

The Bosch PST 700 ReadyToSaw is a saw that comes with a carrying case for easy storage and transportation. With an input power of 500W, it provides sufficient power for various cutting tasks. It has a cutting depth of 70mm in wood, allowing for deep and precise cuts. For non-alloyed steel, the cutting depth is 4mm. The saw has a no-load stroke rate of 500 strokes per minute (spm) and an idle stroke rate (max) of 3100 spm, ensuring efficient cutting performance. Despite its power, it weighs only 1700g, making it relatively lightweight and easy to handle. To enhance visibility and maintain a clean work environment, the saw features a dust blower to remove debris. It also includes a saw blade and a dust extraction port for added convenience. When it comes to vibration levels, the Bosch PST 700 ReadyToSaw has a vibration level of 11 m/s² (with a vibration level uncertainty of 3 m/s²) when cutting steel, and 10 m/s² (with a vibration level uncertainty of 3 m/s²) when cutting wood. Overall, the Bosch PST 700 ReadyToSaw is a compact and portable saw that offers a respectable cutting depth, a range of useful features, and a sturdy carrying case for easy transportation. With its reliable performance and convenient design, this saw is a practical choice for both DIY enthusiasts and professionals in need of a versatile cutting tool.
| Brand | Bosch |
| Model | PST 700 ReadyToSaw | 0 603 3A0 005 |
| Product | saw |
| EAN | 4053423205640 |
| Language | English |
| Filetype | User manual (PDF) |
| Carrying case | Yes |
| Saw blade included | Yes |
| Input power | 500 W |
| AC input voltage | - V |
| Power source | AC |
| Cutting depth in wood | 70 mm |
| Cutting depth in non-alloyed steel | 4 mm |
| Idle stroke rate (max) | 3100 spm |
| Vibration level (steel) | 11 m/s² |
| Vibration level uncertainty (steel) | 3 m/s² |
| Vibration level (wood) | 10 m/s² |
| Vibration level uncertainty (wood) | 3 m/s² |
| Sound pressure level | 88 dB |
| Sound power level | 99 dB |
| Sound level uncertainty | 3 dB |
| No-load stroke rate | 500 spm |
| Weight | 1700 g |
| Product color | Black, Green, Red |
| Dust blower | Yes |
| Dust extraction port | Yes |
| Soft grip | Yes |
| Tool-free blade change | Yes |
| Bevel adjustment | Yes |
| Bevel capacity (max) | 45 ° |
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Bosch PST 700 ReadyToSaw below.
The Bosch PST 700 ReadyToSaw has a weight of 1700 g.
1. Wipe sawdust from the saw blade with a brush. 2. Spray the saw blade with oven cleaner and leave for 30 minutes. 3. Remove the oven cleaner and dirt with a dry cloth. 4. Grease saw blade with Vaseline.
If there is resin or other debris on the blade, it may look like the blade is blunt. If the saw blade has been thoroughly cleaned and is still blunt, it is recommended to have the saw blade sharpened.
1. Soak the rusty part in vinegar until completely soaked through. 2. Let the vinegar work on the rust for 24 hours. 3. Remove the rust with a wire brush or aluminium foil.
The maximum achievable charge level is expressed with 16V or 20V. The V in this case stands for Volt.
The amount of sound varies a lot per brand and type of saw, it is therefore wise to wear hearing protection to be sure.
To adjust the cutting depth on the Bosch PST 700 ReadyToSaw, locate the depth adjustment lever on the side of the saw. Push it forward to increase the depth or pull it back to decrease the depth.
The maximum cutting capacity of the Bosch PST 700 ReadyToSaw is 70 millimeters for wood and 10 millimeters for steel.
To change the blade on the Bosch PST 700 ReadyToSaw, first, ensure the saw is unplugged. Then, locate the blade release button near the blade guard and press it to release the blade. Carefully remove the old blade and insert the new one, making sure it is securely in place.
To align the cutting line with the blade on the Bosch PST 700 ReadyToSaw, use the built-in cutting line guide. Adjust the angle of the saw until the cutting line aligns perfectly with the indicator on the base of the saw.
To ensure safety while using the Bosch PST 700 ReadyToSaw, always wear protective goggles and gloves. Keep your work area well-lit and clear of any obstructions. Before starting, make sure the blade guard is in place and securely fastened. Remember to never force the saw or use it in an unstable position.
Yes, the Bosch PST 700 ReadyToSaw comes with a carrying case. This is convenient for storing and transporting the saw.
The input power of the Bosch PST 700 ReadyToSaw is 500 W. This indicates the amount of electrical power the saw consumes, which is a decent power for a saw of this size.
The vibration level of the Bosch PST 700 ReadyToSaw when cutting steel is 11 m/s². This means that the saw may cause some hand fatigue and discomfort during prolonged use, but it is still within an acceptable range compared to other similar saws.
Yes, the Bosch PST 700 ReadyToSaw has a tool-free blade change feature. This allows for quick and easy blade changes without the need for additional tools.
The sound power level of the Bosch PST 700 ReadyToSaw is 99 dB. This indicates that the saw produces a relatively high amount of noise during operation. It is recommended to use hearing protection when using the saw for extended periods.
Yes, the manual of the Bosch PST 700 ReadyToSaw is available in English .
Is your question not listed? Ask your question here
No results
Need help?
Do you have a question about the Bosch and is the answer not in the manual?
Question and answer
Number of questions: 0