Bosch PST 700 E manual

Bosch PST 700 E
7.9 · 6
PDF manual
 · 122 pages
English
manualBosch PST 700 E
Robert Bosch GmbH
Power Tools Division
70745 Leinfelden-Echterdingen
Germany
www.bosch-pt.com
2 609 003 949 (2009.09) T / 123 WEU
Low Vibr
ation

PST 700 E

de Originalbetriebsanleitung
en Original instructions
fr Notice originale
es Manual original
pt Manual original
it Istruzioni originali
nl Oorspronkelijke gebruiksaanwijzing
da Original brugsanvisning
sv Bruksanvisning i original
no Original driftsinstruks
fi Alkuperäiset ohjeet
el Πρωτότυπο οδηγιών χρήσης
tr Orijinal işletme talimat
OBJ_BUCH-1067-001.book Page 1 Monday, September 28, 2009 8:32 AM

View the manual for the Bosch PST 700 E here, for free. This manual comes under the category saws and has been rated by 6 people with an average of a 7.9. This manual is available in the following languages: English. Do you have a question about the Bosch PST 700 E or do you need help? Ask your question here

Need help?

Do you have a question about the Bosch and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 2
B
Basil RodJuly 5, 2020

The blade has been inserted the other way round in the PST 700E jigsaw and now it will not come out from the SDS system. Can you help, please?

C
Cliff ChaplinNovember 19, 2020

I have a PST 700PE jigsaw. The roller lever has broken. I have parts replacement. I am having difficulty in opening the casing in order to replace the broken part. I have unscrewed all the screws but the casing still refused to separate. Advice and instructions please. Thanks you.

The Bosch PST 700 E is an electric saw that offers efficient cutting capabilities. With an input power of 500 watts and an output power of 300 watts, it provides ample power for various cutting tasks. It boasts a cutting depth of 70 millimeters in wood and 4 millimeters in non-alloyed steel, making it suitable for both carpentry and metalworking projects. The saw weighs 1700 grams, ensuring a lightweight and manageable tool that can be easily maneuvered. One of its key features is the inclusion of a saw blade, allowing users to start cutting right away. Additionally, the tool-free blade change feature enables quick and hassle-free blade replacements. When it comes to vibration levels, the Bosch PST 700 E demonstrates a vibration level of 10 meters per second squared in wood and 11 meters per second squared in steel. The uncertainty level for vibrations is measured at 3 meters per second squared for both wood and steel. In terms of noise levels, this saw generates a sound pressure level of 88 decibels and a sound power level of 99 decibels, with an uncertainty level of 3 decibels. Overall, the Bosch PST 700 E is a reliable and versatile saw that provides efficient cutting performance in both wood and non-alloyed steel. With its light weight, tool-free blade change, and included saw blade, it offers convenience and ease of use for a variety of cutting tasks.

General
BrandBosch
ModelPST 700 E | 0 603 3A0 000
Productsaw
EAN3165140526838, 3165140526852, 4051709623843
LanguageEnglish
FiletypeUser manual (PDF)
Power
Input power500 W
Output power300 W
AC input voltage230 V
Power sourceAC
Performance
Cutting depth in wood70 mm
Cutting depth in non-alloyed steel4 mm
Vibration level (wood)10 m/s²
Vibration level (steel)11 m/s²
Vibration level uncertainty (wood)3 m/s²
Vibration level uncertainty (steel)3 m/s²
Sound pressure level88 dB
Sound power level99 dB
Sound level uncertainty3 dB
Idle stroke rate (min)500 spm
Idle stroke rate (max)3100 spm
Weight & dimensions
Weight1700 g
Packaging content
Saw blade includedYes
Carrying caseYes
Features
Tool-free blade changeYes
Soft gripYes
Product colorBlack, Green, Red
Dust blowerYes
Bevel adjustmentYes
Bevel capacity (max)45 °
Handle typeTop handle
Adjustable speed-
Orbital action-
Built-in lightNo
show more

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Bosch PST 700 E below.

What is the weight of the Bosch PST 700 E?

The Bosch PST 700 E has a weight of 1700 g.

What is the best way to clean my saw blade?

1. Wipe sawdust from the saw blade with a brush. 2. Spray the saw blade with oven cleaner and leave for 30 minutes. 3. Remove the oven cleaner and dirt with a dry cloth. 4. Grease saw blade with Vaseline.

My saw blade is blunt. What now?

If there is resin or other debris on the blade, it may look like the blade is blunt. If the saw blade has been thoroughly cleaned and is still blunt, it is recommended to have the saw blade sharpened.

How do I remove rust from my Bosch saw?

1. Soak the rusty part in vinegar until completely soaked through. 2. Let the vinegar work on the rust for 24 hours. 3. Remove the rust with a wire brush or aluminium foil.

What does '16V' or '20V' mean?

The maximum achievable charge level is expressed with 16V or 20V. The V in this case stands for Volt.

Do I have to wear hearing protection when using a saw?

The amount of sound varies a lot per brand and type of saw, it is therefore wise to wear hearing protection to be sure.

How do I change the blade on the Bosch PST 700 E saw?

To change the blade on your Bosch PST 700 E saw, first, make sure the saw is unplugged. Then, locate the blade release button or lever on the saw and press or lift it. This will loosen the blade. Carefully remove the old blade and insert a new one, making sure it is properly positioned. Finally, release the blade release button or lever to secure the new blade in place.

What should I do if the saw blade gets stuck during operation?

If the saw blade of your Bosch PST 700 E gets stuck during operation, immediately turn off the saw and unplug it. Never try to force the blade free. Check for any potential obstructions or debris around the blade and remove them. Carefully inspect the blade for any damage or warping. If necessary, replace the blade. Once everything is cleared, you can safely resume your cutting tasks.

How can I adjust the cutting depth on the Bosch PST 700 E saw?

Adjusting the cutting depth on your Bosch PST 700 E is simple. Start by unplugging the saw. Then, locate the depth adjustment control or knob on the saw. Rotate the control or knob to your desired cutting depth. Be sure to lock it securely into place before using the saw. Remember to always follow the manufacturer's recommendations for maximum cutting depth.

What type of material can I cut with the Bosch PST 700 E saw?

The Bosch PST 700 E saw is designed to cut a variety of materials including wood, plastic, and soft metals like aluminum. However, it is not suitable for cutting hard metals like steel. Additionally, it is important to use the appropriate blade for the specific material you plan to cut to ensure optimal performance and safety.

How do I properly clean and maintain the Bosch PST 700 E saw?

Maintenance is important to keep your Bosch PST 700 E saw in good working condition. After each use, unplug the saw and use a clean, dry cloth to wipe off any dust, debris, or residue from the saw body and blade. Periodically, check the blade for signs of wear or damage and replace if necessary. Lubricate the moving parts of the saw as recommended by the manufacturer. Properly store the saw in a dry and secure place when not in use to prevent damage or accidents.

Does the Bosch PST 700 E have a tool-free blade change?

Yes, the Bosch PST 700 E has a tool-free blade change. This makes it easy and convenient for users to switch blades without the need for additional tools.

Does the Bosch PST 700 E come with a saw blade included?

Yes, the Bosch PST 700 E comes with a saw blade included. This means that users can start using the saw right away without the need to purchase an additional blade.

What is the power output of the Bosch PST 700 E?

The power output of the Bosch PST 700 E is 300 W. This indicates the amount of power the saw can generate and is important for determining its cutting capabilities. Compared to other similar products, this power output may be considered on the lower side.

Does the Bosch PST 700 E have a dust blower?

Yes, the Bosch PST 700 E has a dust blower. This feature helps to keep the work area clean by blowing away dust and debris, allowing for better visibility and accuracy during cutting tasks.

What is the vibration level of the Bosch PST 700 E when cutting wood?

The vibration level of the Bosch PST 700 E when cutting wood is 10 m/s². This indicates the amount of vibrations the saw produces during operation. With a lower vibration level, the saw provides a smoother and more comfortable cutting experience for the user.

Is the manual of the Bosch PST 700 E available in English?

Yes, the manual of the Bosch PST 700 E is available in English .

Is your question not listed? Ask your question here

No results