View the manual for the Bosch PSS 250 AE here, for free. This manual comes under the category sanders and has been rated by 1 people with an average of a 8.1. This manual is available in the following languages: English. Do you have a question about the Bosch PSS 250 AE or do you need help? Ask your question here

| Brand | Bosch |
| Model | PSS 250 AE | 0 603 340 200 |
| Product | sanders |
| EAN | 3165140447744, 3165140474092, 3165140337533, 3165140337526 |
| Language | English |
| Filetype | User manual (PDF) |
| Weight | 1600 g |
| Sanding plate size (WxD) | 92 x 182 mm |
| Sanding sheet size (velcro) | 93 x 185 mm |
| Sanding sheet size (clamp) | 93 x 230 mm |
| Type of sander | Orbital sander |
| Soft grip | Yes |
| Product color | Black, Green, Red |
| Sanding media fixing | Clamp/Velcro |
| Input power | 250 W |
| Output power | 125 W |
| Power source | AC |
| Sanding surface | 0.0167 m² |
| 14000 - 24000 | |
| Vibration emission | 5.5 m/s² |
| Uncertainty K | 1.5 m/s² |
| Oscillating orbit diameter | 2 mm |
| Idle oscillation rate (min) | 14000 OPM |
| Idle oscillation rate (max) | 24000 OPM |
| Eccentricity | 1 mm |
| Sound power level | 93 dB |
| Sound pressure level | 82 dB |
| Sound level uncertainty | 3 dB |
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Bosch PSS 250 AE below.
The maximum achievable charge level is expressed with 16V or 20V. The V in this case stands for Volt.
The Bosch PSS 250 AE has a weight of 1600 g.
Yes, it has a soft grip. This means that the user will have a comfortable and secure grip on the sander during use, reducing fatigue and increasing control.
The sanding plate size is 92 x 182 mm. This provides a decent surface area for sanding, allowing for efficient and effective sanding of various sized materials.
The idle oscillation rate ranges from 14000 to 24000 OPM. This gives the user flexibility in adjusting the speed of the sander depending on the material and desired result.
The vibration emission is 5.5 m/s². This is relatively low, indicating that the sander produces minimal vibration during use, reducing the strain on the user's hands and arms.
The sound power level is 93 dB. This is within a normal range for power tools, but it is still recommended to wear hearing protection when using the sander for extended periods to prevent hearing damage.
To ensure safety while using the Bosch PSS 250 AE sander, follow these steps: 1. Read all safety warnings and instructions provided in the manual. Failure to do so may result in electric shock, fire, or serious injury. 2. Use the sander only for dry sanding of wood, plastic, filler, and coated surfaces, as intended by the manufacturer. 3. Familiarize yourself with the product features, such as the thumbwheel for orbit frequency preselection, on/off switch, dust box with a micro filter system, sanding-sheet clamp, sanding plate, sanding sheet, handle with an insulated gripping surface, extraction outlet, filter element, vacuum hose, and perforating tool. 4. Ensure that any devices provided for dust extraction and collection are connected and properly used. Using dust collection can reduce dust-related hazards. 5. Do not force the sander during use. Use the correct power tool for your application, as using the wrong tool can be unsafe. 6. Check that the on/off switch functions properly. If the switch does not turn the sander on and off, do not use the tool and have it repaired. 7. Before making any adjustments, changing accessories, or storing the sander, disconnect it from the power source or remove the battery pack. 8. Store the sander out of the reach of children and prevent unauthorized users from operating it. 9. Regularly maintain the sander by checking for misalignment or binding of moving parts, breakage of parts, and any other conditions that may affect its operation. Have the sander repaired before use if any damage is detected. 10. Use the sander, accessories, and tool bits according to the instructions provided, considering the working conditions and the specific tasks to be performed. Remember, always prioritize your safety and follow the guidelines provided by the manufacturer to ensure a safe and efficient sanding experience with the Bosch PSS 250 AE sander.
If the Bosch PSS 250 AE sander does not turn on when you press the on/off switch, follow these steps: 1. Check the power source: Ensure that the sander is properly connected to a functioning power outlet. Verify that the power cord is not damaged or frayed. 2. Confirm the switch position: Make sure that the on/off switch is in the "on" position (usually indicated by the letter "I"). If it is in the "off" position (usually indicated by the number "0"), switch it to the "on" position. 3. Test the power supply: Try plugging another device into the same power outlet to verify if the outlet is providing power. If the other device works, the issue may be with the sander itself. 4. Check the circuit breaker: If the power outlet is not providing power, check the circuit breaker or fuse box to see if a circuit has been tripped or a fuse has blown. Reset the circuit breaker or replace the fuse if necessary. 5. Seek professional assistance: If the sander still does not turn on after following these steps, it may require professional repair. Contact a qualified service center or the manufacturer's customer service for further assistance. Remember to always prioritize your safety and consult the manual for specific troubleshooting steps or contact the manufacturer for guidance.
To attach and remove sanding sheets on the sanding plate of the Bosch PSS 250 AE sander, follow these steps: 1. For sanding sheets with a hook and loop (Velcro) backing (PSS 200 A/PSS 250 AE): a. Before attaching a new sanding sheet, clean the sanding plate to remove any dirt or dust. b. Tap the hook and loop surface of the sanding plate to ensure optimal adhesion. c. Align one side of the sanding sheet with the sanding plate and press it firmly onto the plate. d. To remove the sanding sheet, grasp one corner and peel it off the sanding plate. 2. For sanding sheets without a hook and loop backing (PSS 190 AC/PSS 200 AC/PSS 250 AE): a. Lift the sanding-sheet clamp slightly and disengage it. b. Insert the sanding sheet under the open rear sanding-sheet clamp until it reaches the stop. c. Secure the sanding sheet by engaging the rear sanding-sheet clamp. d. Wrap the sanding sheet tightly around the sanding plate. e. Pass the other end of the sanding sheet under the front sanding-sheet clamp and secure it by engaging the clamp. f. To remove the sanding sheet, release the sanding-sheet clamps and pull out the sanding sheet. Remember to select the appropriate sanding sheet for your desired application and always follow the instructions provided in the manual for proper usage and safety precautions.
If the Bosch PSS 250 AE sander is producing excessive noise or vibrations during operation, follow these steps: 1. Check the sanding sheet: Ensure that the sanding sheet is securely attached to the sanding plate. If it is loose or worn out, replace it with a new one. 2. Clean the sanding plate: Remove any dust or debris from the sanding plate using a brush or cloth. Accumulated debris can cause vibrations and affect the performance of the sander. 3. Verify proper sanding technique: Ensure that you are using the correct sanding technique. Apply even pressure and avoid excessive force or uneven movements, as this can lead to increased vibrations and noise. 4. Check for worn or damaged parts: Inspect the sanding plate, sanding sheet, and other components for any signs of wear or damage. Replace any worn or damaged parts to maintain optimal performance and reduce vibrations. 5. Use appropriate sanding speed: Adjust the speed of the sander to match the material and task at hand. Using excessive speed can cause increased vibrations and noise. 6. Consider using vibration-dampening accessories: Some sanders offer vibration-dampening features or accessories that can help reduce vibrations. Check if such accessories are available for the Bosch PSS 250 AE sander. If the excessive noise or vibrations persist despite following these steps, it is recommended to contact a qualified service center or the manufacturer's customer service for further assistance and potential repairs. Remember to prioritize your safety and wear appropriate personal protective equipment, such as ear protection, when operating power tools.
To clean and maintain the dust box with the micro filter system of the Bosch PSS 250 AE sander, follow these steps: 1. Ensure that the sander is turned off and unplugged from the power source before cleaning the dust box. 2. Remove the dust box from the sander by pulling it downward. 3. Tap the dust box gently on a solid surface to remove any loose dust or debris from the filter element. 4. Open the dust box by flipping up the filter element. 5. Empty the contents of the dust box into a suitable waste container. 6. Clean the filter element by using a soft brush to remove any remaining dust or debris. Ensure that the filter element is completely dry before reinserting it into the dust box. 7. Close the dust box by folding down the filter element until it clicks into place. 8. Reattach the dust box to the sander by aligning it with the designated slot and pushing it upward until it locks into position. Regularly clean the dust box and filter element to maintain optimal performance and prevent clogging. If the filter element becomes damaged or excessively dirty, it may need to be replaced with a new one. Note: Refer to the manual for specific instructions and illustrations related to cleaning and maintaining the dust box with the micro filter system of the Bosch PSS 250 AE sander.
Yes, the manual of the Bosch PSS 250 AE is available in English .
Is your question not listed? Ask your question here
No results
Need help?
Do you have a question about the Bosch and is the answer not in the manual?
Question and answer
Number of questions: 0