View the manual for the Bosch PSS 200 AC here, for free. This manual comes under the category sanders and has been rated by 1 people with an average of a 9.6. This manual is available in the following languages: English. Do you have a question about the Bosch PSS 200 AC or do you need help? Ask your question here

| Brand | Bosch |
| Model | PSS 200 AC | PSS 200 AC |
| Product | sanders |
| EAN | 3165140337489, 3165140337496 |
| Language | English |
| Filetype | User manual (PDF) |
| Weight | 1600 g |
| Power | 200 W |
| 24000 | |
| Vibration emission | 5.5 m/s² |
| Uncertainty K | 1.5 m/s² |
| Type of sander | Orbital sander |
| Oscillating orbit diameter | 2 mm |
| Idle oscillation rate (max) | 24000 OPM |
| Eccentricity | 1 mm |
| Output power | 125 W |
| Power source | AC |
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Bosch PSS 200 AC below.
The maximum achievable charge level is expressed with 16V or 20V. The V in this case stands for Volt.
The Bosch PSS 200 AC has a weight of 1600 g.
The Bosch PSS 200 AC has a power of 200 Watts, which means it provides strong and efficient sanding for the user.
The Bosch PSS 200 AC is an orbital sander, which is known for providing smooth and precise finishes on various surfaces.
The maximum oscillating orbit diameter of the Bosch PSS 200 AC is 2 millimeters, allowing for efficient material removal and smooth sanding.
The vibration emission of the Bosch PSS 200 AC is 5.5 m/s² with an uncertainty of 1.5 m/s², which is relatively low and signifies reduced user fatigue during prolonged use compared to other sanders.
The Bosch PSS 200 AC is powered by an AC source, providing consistent and reliable power to tackle various sanding tasks effectively.
To ensure that the workpiece is securely held while using the Bosch PSS 200 AC sander, follow these steps: 1. Place the workpiece on a stable and flat surface. 2. Use clamps or a workbench to secure the workpiece in place. 3. Make sure the workpiece is not loose or wobbly before starting the sanding process. 4. Hold the sander with a firm grip and apply consistent pressure while sanding. 5. Avoid excessive force that may cause the workpiece to move unexpectedly. 6. Check periodically to ensure the workpiece remains securely held throughout the sanding operation.
Before placing the Bosch PSS 200 AC sander down for safety, follow these steps: 1. Check the power tool for any damage and ensure it is properly maintained. 2. Keep cutting tools sharp and clean to prevent binding and maintain control. 3. Use the power tool according to the instructions and for its intended purpose. 4. Keep handles dry, clean, and free from oil or grease for safe handling. 5. Service the power tool with identical replacement parts by a qualified repair person to maintain safety. These steps will help ensure the safe placement of the Bosch PSS 200 AC sander.
To select the appropriate sanding sheet for the Bosch PSS 200 AC sander based on the material and required surface removal rate, follow these steps: 1. Determine the material you are working with (wood, plastic, metal, filler, varnished surfaces). 2. Consider the required surface removal rate: Coarse (40, 60) for pre-sanding rough beams, Medium (80, 100, 120) for surface sanding, Fine (180, 240) for finish-sanding hardwoods, and various grits (40-320) for paint and lacquer layers. 3. Choose the sanding sheet grit accordingly based on the material and desired finish. 4. Ensure proper dust extraction for materials that may produce harmful dust. 5. Clean the air vents regularly to prevent hazards. 6. Secure the workpiece firmly during sanding. 7. Wait for the sander to stop completely before setting it down.
Yes, the manual of the Bosch PSS 200 AC is available in English .
Is your question not listed? Ask your question here
No results
Need help?
Do you have a question about the Bosch and is the answer not in the manual?
Question and answer
Number of questions: 0