View the manual for the Bosch PSR 1080 LI-2 here, for free. This manual comes under the category drill machines and has been rated by 3 people with an average of a 7.7. This manual is available in the following languages: English. Do you have a question about the Bosch PSR 1080 LI-2 or do you need help? Ask your question here


| Brand | Bosch |
| Model | PSR 1080 LI-2 | 0 603 9A2 101 |
| Product | drill machine |
| EAN | 3165140835718 |
| Language | English |
| Filetype | User manual (PDF) |
| Soft grip | Yes |
| Reverse | Yes |
| Drilling, Screwdriving | |
| Chuck type | Keyless |
| Product design | Pistol grip drill |
| Built-in light | No |
| Drilling | Yes |
| Screwdriving | Yes |
| Torque settings | 15 |
| Maximum torque (soft applications) | 11 N⋅m |
| Number of gears | 2 |
| Torque (max) | 20 N⋅m |
| Sound level uncertainty | 3 dB |
| Sound pressure level | 66 dB |
| Sound power level | 77 dB |
| Vibration level (metal drilling) | 2.5 m/s² |
| Idle speed (1st gear) | 450 RPM |
| Idle speed (2nd gear) | 1650 RPM |
| Screw diameter (max) | 6 mm |
| Drilling diameter in wood (max) | 20 mm |
| Drilling diameter in steel (max) | 6 mm |
| Maximum torque (hard applications) | 20 N⋅m |
| Vibration emission | 2.5 m/s² |
| Product color | Black, Green |
| Electronic Cell Protection (ECP) | Yes |
| Uncertainty K | 1.5 m/s² |
| Battery level indicator | Yes |
| Power source | Battery |
| Battery technology | Lithium-Ion (Li-Ion) |
| Battery voltage | 10.8 V |
| Battery capacity | 1.5 Ah |
| Screwdriver bit | Yes |
| Number of batteries included | 2 pc(s) |
| Battery charger included | Yes |
| Carrying case | Yes |
| Battery included | Yes |
| Weight | 1000 g |
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Bosch PSR 1080 LI-2 below.
1. Soak the rusty part in vinegar until completely soaked through. 2. Let the vinegar work on the rust for 24 hours. 3. Remove the rust with a wire brush or aluminium foil.
The maximum achievable charge level is expressed with 16V or 20V. The V in this case stands for Volt.
The amount of sound varies a lot per brand and type of drill machine, it is therefore wise to wear hearing protection to be sure.
The Bosch PSR 1080 LI-2 has a weight of 1000 g.
Yes, the Bosch PSR 1080 LI-2 has a soft grip. This means that it provides comfortable and secure handling for the user.
The Bosch PSR 1080 LI-2 has 15 torque settings. This allows the user to adjust the power and control of the drill according to their specific needs.
Yes, the Bosch PSR 1080 LI-2 can be used for soft applications with a maximum torque of 11 N⋅m. This means it can handle tasks that require a lower level of power.
Yes, the Bosch PSR 1080 LI-2 has a reverse function. This allows the user to easily remove screws or back out of a hole without having to manually rotate the drill.
The vibration emission of the Bosch PSR 1080 LI-2 is 2.5 m/s². This means it has a relatively low level of vibration, which can help reduce fatigue and improve user comfort during prolonged use.
To properly use the auxiliary handle of the Bosch PSR 1080 LI-2 drill machine, follow these steps: 1. Ensure that the auxiliary handle is securely attached to the drill machine. The handle should be positioned in a way that provides a comfortable and firm grip. 2. When using the drill machine, hold the main handle with one hand and the auxiliary handle with the other hand. This will provide better control and stability while operating the tool. 3. Adjust the position of the auxiliary handle according to your preference and the task at hand. You can typically rotate the handle to different angles to accommodate different drilling or screwdriving positions. 4. Apply even pressure on both handles while operating the drill machine. This will help maintain balance and prevent the tool from veering off course. 5. Keep a firm grip on the handles throughout the drilling or screwdriving process. Avoid excessive force or sudden movements that may cause loss of control. By following these steps, you can ensure safe and effective use of the auxiliary handle on the Bosch PSR 1080 LI-2 drill machine.
If you suspect there are hidden utility lines in the work area while using the Bosch PSR 1080 LI-2 drill machine, follow these steps: 1. Stop drilling immediately if you suspect there may be hidden utility lines. It is important to prioritize safety and avoid potential hazards. 2. Use appropriate detectors to determine if utility lines are present in the work area. These detectors can help identify the location of electric lines, gas lines, or water lines. 3. If you are unsure about the presence of utility lines or if you need assistance, contact the local utility company. They can provide guidance and help ensure safe drilling practices. 4. Avoid drilling in areas where utility lines are suspected to be present. Penetrating electric lines can lead to fire and electric shock, damaging gas lines can cause explosions, and penetrating water lines can result in property damage. By following these steps, you can minimize the risk of accidents or damage caused by hidden utility lines while using the Bosch PSR 1080 LI-2 drill machine.
If the tool insert of the Bosch PSR 1080 LI-2 drill machine gets jammed, you can follow these steps to resolve the issue: 1. Clamp the short end of a hex key 15 into the keyless chuck 1. 2. Place the machine on a stable surface, such as a workbench. 3. Hold the machine firmly and loosen the keyless chuck 1 by turning the hex key 15 in a counterclockwise direction. 4. If the keyless chuck is tightly seated, give the long end of the hex key 15 a light blow to loosen it. 5. Remove the hex key from the keyless chuck and completely unscrew the keyless chuck. 6. To mount the drill chuck, follow the reverse order of the previous steps. 7. Tighten the drill chuck with a tightening torque of approximately 1.5-2.0 Nm. 8. Screw the securing screw 14 in a counterclockwise direction into the opened keyless chuck. Always use a new securing screw, as the threads are covered with a thread-locking compound that loses its effect after multiple usage. By following these steps, you should be able to resolve the issue of a jammed tool insert on the Bosch PSR 1080 LI-2 drill machine.
To prevent accidents caused by high reaction torque while using the Bosch PSR 1080 LI-2 drill machine, follow these steps to hold the tool properly: 1. Firm Grip: Hold the drill machine with a firm grip using both hands. Place one hand on the main handle and the other hand on the auxiliary handle, if available. This will provide better control and stability during operation. 2. Balanced Stance: Stand in a balanced and stable position with your feet shoulder-width apart. This will help you maintain control and prevent any sudden movements or loss of balance. 3. Body Position: Position your body in a way that allows you to maintain a comfortable and stable posture. Keep your back straight and avoid leaning or overreaching while operating the drill machine. 4. Apply Even Pressure: Apply even pressure on the drill machine while drilling or driving screws. Avoid excessive force or sudden movements that may cause the tool to twist or jerk. 5. Use Proper Technique: Use the appropriate drilling or screwdriving technique recommended for the task at hand. Follow the instructions provided in the manual for specific applications. By following these steps and adopting proper holding techniques, you can minimize the risk of accidents caused by high reaction torque while using the Bosch PSR 1080 LI-2 drill machine.
To secure the workpiece while using the Bosch PSR 1080 LI-2 drill machine, follow these steps: 1. Place the workpiece on a stable surface, such as a workbench or table. Ensure that it is securely positioned and will not move during drilling or screwdriving. 2. If necessary, use clamping devices or a vice to hold the workpiece in place. This will provide additional stability and prevent it from shifting during operation. 3. Align the drill or screwdriving point with the desired location on the workpiece. Take care to position it accurately before starting the drilling or screwdriving process. 4. Hold the drill machine with a firm grip, using both hands if possible. This will help maintain control and prevent any accidental slips or movements. 5. Apply even pressure on the drill machine while drilling or driving screws. Avoid excessive force or sudden movements that may cause the tool to veer off course or damage the workpiece. By following these steps, you can ensure that the workpiece is securely held and minimize the risk of accidents or damage while using the Bosch PSR 1080 LI-2 drill machine.
Yes, the manual of the Bosch PSR 1080 LI-2 is available in English .
Is your question not listed? Ask your question here
No results
Need help?
Do you have a question about the Bosch and is the answer not in the manual?
Question and answer
Number of questions: 0