View the manual for the Bosch PSR 10,8 LI-2 here, for free. This manual comes under the category drill machines and has been rated by 2 people with an average of a 9.4. This manual is available in the following languages: English. Do you have a question about the Bosch PSR 10,8 LI-2 or do you need help? Ask your question here




| Brand | Bosch |
| Model | PSR 10,8 LI-2 | 0 603 972 909 |
| Product | drill machine |
| EAN | 3165140582544 |
| Language | English |
| Filetype | User manual (PDF) |
| Soft grip | Yes |
| Reverse | Yes |
| Drilling, Screwdriving | |
| Chuck type | Keyless |
| Product design | Right-angle drill |
| Drilling | Yes |
| Screwdriving | Yes |
| Torque settings | 21 |
| Maximum torque (soft applications) | 11 N⋅m |
| Number of gears | 2 |
| Idle speed (1st gear) | 350 RPM |
| Idle speed (2nd gear) | 1100 RPM |
| Screw diameter (max) | 6 mm |
| Drilling diameter in wood (max) | 20 mm |
| Drilling diameter in steel (max) | 8 mm |
| Maximum torque (hard applications) | 22 N⋅m |
| Vibration emission | 2.5 m/s² |
| Product color | Black, Green, Red |
| Electronic Cell Protection (ECP) | Yes |
| Battery level indicator | Yes |
| Charging time | 60 min |
| Power source | Battery |
| Battery technology | Lithium-Ion (Li-Ion) |
| Battery voltage | 10.8 V |
| Battery capacity | 1.5 Ah |
| Weight | 950 g |
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Bosch PSR 10,8 LI-2 below.
1. Soak the rusty part in vinegar until completely soaked through. 2. Let the vinegar work on the rust for 24 hours. 3. Remove the rust with a wire brush or aluminium foil.
The maximum achievable charge level is expressed with 16V or 20V. The V in this case stands for Volt.
The amount of sound varies a lot per brand and type of drill machine, it is therefore wise to wear hearing protection to be sure.
The Bosch PSR 10,8 LI-2 has a weight of 950 g.
Yes. This means that the drill machine is designed to be comfortable and ergonomic to hold, making it easier to use for extended periods of time.
21. This provides the user with a wide range of torque options to choose from, allowing for more precise and controlled drilling or screw driving.
Yes. This feature allows the user to easily switch between forward and reverse rotation, making it convenient for various applications such as removing screws or backing out drill bits.
11 N⋅m. This indicates the amount of force the drill machine can generate for lighter tasks, making it suitable for tasks such as assembling furniture or installing fixtures.
Yes. This feature allows the user to easily monitor the remaining battery life, preventing unexpected power shortages during use and ensuring uninterrupted workflow.
To mount and operate the Bosch PSR 10,8 LI-2 drill machine, follow these steps: 1. Ensure that you are wearing appropriate work clothing and avoid loose-hanging clothes, jewelry, or accessories that could get caught in the rotating parts of the drill machine. 2. Connect and use dust collection facilities if available to reduce dust-related hazards. 3. Use the correct power tool for your application. Using the right tool will ensure better and safer performance. 4. Check that the switch of the power tool turns it on and off properly. If the switch is not functioning correctly, do not use the drill machine and have it repaired. 5. Before making any adjustments, changing accessories, or storing the power tool, disconnect the plug from the power source or remove the battery pack. By following these steps, you can safely mount and operate the Bosch PSR 10,8 LI-2 drill machine.
If you are unable to remove the battery from the Bosch PSR 10,8 LI-2 drill machine, follow these steps: 1. Ensure that the drill machine is turned off and disconnected from the power source. 2. Check if the battery is properly aligned with the battery compartment. Make sure it is securely inserted. 3. Apply gentle pressure to the battery and try to slide it out of the compartment. Avoid using excessive force to prevent damage. 4. If the battery still does not come out, check for any obstructions or debris in the battery compartment. Clean it if necessary. 5. If the battery is stuck due to corrosion, use a soft cloth or brush to clean the contacts between the battery and the drill machine. Apply a small amount of contact cleaner if needed. 6. If none of the above steps work, it is recommended to contact Bosch customer support or a qualified technician for further assistance. By following these steps, you should be able to resolve the issue of being unable to remove the battery from the Bosch PSR 10,8 LI-2 drill machine.
To properly insert the battery into the Bosch PSR 10,8 LI-2 drill machine, follow these steps: 1. Ensure that the drill machine is turned off and disconnected from the power source. 2. Locate the battery compartment on the drill machine. It is usually located on the handle or the base of the drill. 3. Hold the battery with one hand, aligning the contacts on the battery with the corresponding contacts in the battery compartment. 4. Insert the battery into the compartment, making sure it is fully seated and securely in place. 5. Apply gentle pressure to the battery, pushing it in until it clicks or locks into position. 6. Once the battery is properly inserted, you can proceed to use the drill machine for your desired applications. By following these steps, you can ensure that the battery is correctly inserted into the Bosch PSR 10,8 LI-2 drill machine, allowing you to use it efficiently and safely.
To mount application tools on the Bosch PSR 10,8 LI-2 drill machine, follow these steps: 1. Ensure that the drill machine is turned off and disconnected from the power source. 2. Select the appropriate application tool for your desired task. Refer to the tool's user manual for compatibility and usage instructions. 3. Locate the chuck on the front of the drill machine. The chuck is the part that holds the application tool. 4. Open the chuck by rotating it counterclockwise. This will loosen the jaws of the chuck. 5. Insert the shank of the application tool into the chuck, making sure it is aligned with the jaws. 6. Tighten the chuck by rotating it clockwise. Use your hand to firmly tighten the chuck, ensuring that the application tool is securely held in place. 7. Double-check that the application tool is properly inserted and tightened before using the drill machine. By following these steps, you can safely and correctly mount application tools on the Bosch PSR 10,8 LI-2 drill machine for various tasks.
To reverse the rotational direction of the Bosch PSR 10,8 LI-2 drill machine, follow these steps: 1. Ensure that the drill machine is turned off and disconnected from the power source. 2. Locate the rotational direction switch on the drill machine. It is usually located near the trigger or on the top of the drill. 3. Identify the symbols or indicators on the switch that represent the different rotational directions. These symbols may include arrows pointing in opposite directions or the letters "R" and "L" for right and left rotation. 4. To change the rotational direction to the desired setting, slide or toggle the switch to the corresponding symbol or indicator. For example, if you want to switch to clockwise rotation, align the switch with the symbol indicating clockwise rotation. 5. Once the switch is in the desired position, you can proceed to use the drill machine with the selected rotational direction. By following these steps, you can easily reverse the rotational direction of the Bosch PSR 10,8 LI-2 drill machine to suit your specific needs and applications.
Yes, the manual of the Bosch PSR 10,8 LI-2 is available in English .
Is your question not listed? Ask your question here
No results
Need help?
Do you have a question about the Bosch and is the answer not in the manual?
Question and answer
Number of questions: 0