View the manual for the Bosch PSM Primo here, for free. This manual comes under the category sanders and has been rated by 1 people with an average of a 5.7. This manual is available in the following languages: English. Do you have a question about the Bosch PSM Primo or do you need help? Ask your question here

| Brand | Bosch |
| Model | PSM Primo | 0 603 3B8 000 |
| Product | sanders |
| EAN | 3165140718059 |
| Language | English |
| Filetype | User manual (PDF) |
| Weight | 600 g |
| Power | 50 W |
| Sanding surface | 0.0093 m² |
| Vibration emission | 6.5 m/s² |
| Uncertainty K | 1.5 m/s² |
| Type of sander | Multi sander |
| Soft grip | Yes |
| Product color | Black, Green, Red, Silver |
| Sanding media fixing | Velcro |
| Oscillating orbit diameter | 1.4 mm |
| Eccentricity | 0.7 mm |
| Sound power level | 80 dB |
| Sound pressure level | 70 dB |
| Sound level uncertainty | 3 dB |
| Idle oscillation rate (max) | 24000 OPM |
| Idle oscillation rate (min) | 12000 OPM |
| AC input voltage | 230 V |
| Power source | AC |
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Bosch PSM Primo below.
The maximum achievable charge level is expressed with 16V or 20V. The V in this case stands for Volt.
The Bosch PSM Primo has a weight of 600 g.
Yes, the Bosch PSM Primo has a soft grip, providing the user with a comfortable and secure hold while sanding.
The sanding surface area of the Bosch PSM Primo is 0.0093 square meters, allowing for efficient sanding of various surfaces.
The vibration emission of the Bosch PSM Primo is 6.5 meters per second squared, which is relatively low compared to similar sanders, ensuring minimal hand fatigue for the user.
The sound power level of the Bosch PSM Primo is 80 dB, making it emit a moderate level of noise during operation.
The Bosch PSM Primo has an idle oscillation rate range of 12,000 to 24,000 OPM, providing versatility for different sanding tasks.
To improve the performance of your Bosch PSM Primo sander on wood, filler, or coated surfaces, follow these steps: 1. Check the condition of the sanding sheet and replace it if worn out. 2. Ensure the sanding plate is securely attached and aligned properly. 3. Use the appropriate grain size sanding sheet for the material: - Coarse (40) for rough beams and boards. - Medium (80, 120) for face sanding and planing irregularities. - Fine (180) for finish sanding of hardwood. 4. Utilize specialty sanding plates for specific applications. 5. Maintain good ventilation and use a dust extraction system to prevent dust accumulation. 6. Select the correct sanding sheet based on the material and desired material removal rate. 7. Always use both sanding sheets with the same grain size for optimal performance. 8. Attach and remove sanding sheets correctly for effective sanding. 9. Consider replacing the sanding plate if necessary for consistent results.
To troubleshoot if the on/off switch of your Bosch PSM Primo sander is not functioning properly, follow these steps: 1. Check the power supply by ensuring the sander is properly plugged into a working outlet. 2. Inspect the power cord for any visible damage or fraying that may be affecting the switch functionality. 3. Clean the switch area to remove any dust or debris that could be obstructing its operation. 4. Test the switch by pressing it firmly and listening for any unusual sounds or clicks. 5. If the switch still does not work, contact a qualified repair person for further inspection and potential replacement. Ensure your safety by unplugging the sander before performing any troubleshooting steps.
To improve the effectiveness of the dust extraction system on your Bosch PSM Primo sander, follow these steps: 1. Use a dust extraction system suitable for the material you are working on. 2. Ensure good ventilation in the working area. 3. Consider wearing a P2 filter-class respirator for added protection. 4. Avoid dust accumulation at the workplace to prevent hazards. 5. For integrated dust extraction with a dust box, attach and empty the dust box properly. 6. For external dust extraction, connect the vacuum hose to a suitable vacuum cleaner. 7. When vacuuming harmful dust, use a special vacuum cleaner. 8. Regularly clean and replace sanding sheets for optimal dust extraction. 9. Match the punched holes in the sanding sheet with those in the sanding plate. 10. Only use sanding sheets with the same grain size for consistent results.
Yes, the manual of the Bosch PSM Primo is available in English .
Is your question not listed? Ask your question here
No results
Need help?
Do you have a question about the Bosch and is the answer not in the manual?
Question and answer
Number of questions: 0