View the manual for the Bosch PSM 160 A here, for free. This manual comes under the category sanders and has been rated by 6 people with an average of a 8.8. This manual is available in the following languages: English. Do you have a question about the Bosch PSM 160 A or do you need help? Ask your question here




The Sanders Bosch PSM 160 A is a multi-sander that weighs 1400 grams, making it lightweight and easy to maneuver. Its soft grip ensures a comfortable grip during operation. With an idle speed of up to 24000 RPM, this sander is capable of delivering efficient sanding performance. Featuring a sanding surface of 1.04 square meters, the Sanders Bosch PSM 160 A allows for extended coverage while working on various surfaces. The oscillating orbit diameter of 1.6 millimeters enables accurate sanding, resulting in smooth finishes. The input power of 160 watts ensures sufficient power for sanding tasks, while the eccentricity of 0.8 millimeters enhances the efficiency of the tool. The Sanders Bosch PSM 160 A is powered by an AC power source, allowing for continuous operation without the need for battery replacements or recharges. Overall, this multi-sander is designed to offer reliability and durability. Its construction with premium materials ensures long-term performance, making it a suitable tool for both professional and DIY sanding projects.
| Brand | Bosch |
| Model | PSM 160 A | 0 603 377 000 |
| Product | sanders |
| EAN | 3165140327800, 3165140327831, 3165140474085, 3165140665070 |
| Language | English |
| Filetype | User manual (PDF) |
| Weight | 1400 g |
| Power | - W |
| Sanding surface | 1.04 m² |
| Type of sander | Multi sander |
| Soft grip | Yes |
| Idle speed (max) | 24000 RPM |
| Oscillating orbit diameter | 1.6 mm |
| Eccentricity | 0.8 mm |
| Input power | 160 W |
| Power source | AC |
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Bosch PSM 160 A below.
The maximum achievable charge level is expressed with 16V or 20V. The V in this case stands for Volt.
The Bosch PSM 160 A has a weight of 1400 g.
To change the sanding sheet, locate the lever at the side of the sander and pull it forward to release the clamping mechanism. Then, remove the old sanding sheet and insert a new one, making sure it aligns properly with the sanding plate. Finally, push the lever back to secure the new sanding sheet in place.
The Bosch PSM 160 A features a variable speed control dial. For sanding tasks that require more material removal, such as smoothing rough surfaces, it is recommended to set the speed to a higher setting. For finer sanding or finishing, a lower speed setting is more suitable. Experiment with different settings to find the one that suits your specific task.
To connect the dust extraction feature, first, ensure that your vacuum cleaner has a compatible hose. Then, attach one end of the hose to the dust extraction port located at the rear of the sander. Connect the other end of the hose to the vacuum cleaner. This will help keep your work area cleaner by effectively collecting the dust generated during sanding.
Absolutely! The triangular shape of the Bosch PSM 160 A makes it perfect for sanding in tight corners and narrow spaces. The pointed tip of the sanding plate allows you to easily access hard-to-reach areas, ensuring a consistent finish across your work surface.
To maintain optimal performance, regularly clean the sanding plate and dust extraction filter. Use a brush or compressed air to remove any accumulated dust or debris from these parts. Additionally, ensure that the power cord is in good condition and free from any damage. Taking these simple maintenance steps will help extend the lifespan and performance of your Bosch PSM 160 A sander.
Yes, the Bosch PSM 160 A has a soft grip. This ensures comfortable and secure handling during sanding, reducing fatigue and improving control.
The idle speed (max) of the Bosch PSM 160 A is 24000 RPM. This high speed allows for efficient and fast sanding, saving time and effort.
The Bosch PSM 160 A has a sanding surface of 1.04 m². This generous size enables larger areas to be sanded quickly and evenly.
The oscillating orbit diameter of the Bosch PSM 160 A is 1.6 mm. This small orbit diameter provides fine and precise sanding, ideal for achieving smooth finishes.
The input power of the Bosch PSM 160 A is 160 W. While this may not be the highest in its class, it still offers sufficient power for most sanding tasks and ensures efficient removal of material.
Yes, the manual of the Bosch PSM 160 A is available in English .
Is your question not listed? Ask your question here
No results
Need help?
Do you have a question about the Bosch and is the answer not in the manual?
Question and answer
Number of questions: 1How do I request replacement front and back sanding sheets for the Bosch PSM 160 A and replacement front and back pads?