View the manual for the Bosch PSB 750 RCE here, for free. This manual comes under the category drill machines and has been rated by 5 people with an average of a 7.9. This manual is available in the following languages: English. Do you have a question about the Bosch PSB 750 RCE or do you need help? Ask your question here

The Bosch PSB 750 RCE drill machine is a versatile and efficient tool designed for a wide range of drilling applications. It features a keyless chuck type, allowing for quick and easy bit changes. With a maximum torque of 10 N⋅m, it delivers strong and consistent power to tackle tough drilling tasks. The drill machine operates at a maximum idle speed of 3000 RPM, providing fast and efficient drilling performance. It also includes a reverse function, allowing for easy screwdriving and removal of fasteners. For more demanding applications, the drill offers hammer drilling capability with an impact rate of 48000 bpm. The PSB 750 RCE can handle various drilling tasks with ease. It can drill up to 12 mm diameter holes in steel, 14 mm diameter holes in concrete, and 30 mm diameter holes in wood. This makes it suitable for a range of DIY projects and professional use. To ensure comfort and control during operation, the drill machine is equipped with a soft grip handle. This reduces user fatigue and provides a secure grip for precise drilling. With an output power of 400 W and an input power of 750 W, it delivers reliable performance. Weighing 1800 g, the drill is lightweight and easy to maneuver, ensuring user convenience and reducing fatigue during prolonged use. The vibration level during metal drilling is measured at 5 m/s², with an uncertainty of 1.5 m/s². In conclusion, the Bosch PSB 750 RCE drill machine is a powerful and versatile tool that offers reliable performance for a variety of drilling tasks. It is designed with convenience and precision in mind, making it suitable for both professional and DIY use.
| Brand | Bosch |
| Model | PSB 750 RCE | 0 603 128 500 |
| Product | drill machine |
| EAN | 3165140512428, 3165140512435, 3165140621595 |
| Language | English |
| Filetype | User manual (PDF) |
| Chuck type | Keyless |
| Reverse | Yes |
| Hammer drilling | Yes |
| Soft grip | Yes |
| Torque (max) | 10 N⋅m |
| Idle speed (max) | 3000 RPM |
| Impact rate (high speed) | 48000 bpm |
| Drilling diameter in steel (max) | 12 mm |
| Drilling diameter in concrete (max) | 14 mm |
| Drilling diameter in wood (max) | 30 mm |
| Vibration level (metal drilling) | 5 m/s² |
| Sound power level | 111 dB |
| Sound pressure level | 100 dB |
| Sound level uncertainty | 3 dB |
| Output power | 400 W |
| Input power | 750 W |
| Power source | AC |
| Weight | 1800 g |
| Uncertainty K | 1.5 m/s² |
| Product color | Black, Green, Red |
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Bosch PSB 750 RCE below.
1. Soak the rusty part in vinegar until completely soaked through. 2. Let the vinegar work on the rust for 24 hours. 3. Remove the rust with a wire brush or aluminium foil.
The maximum achievable charge level is expressed with 16V or 20V. The V in this case stands for Volt.
The amount of sound varies a lot per brand and type of drill machine, it is therefore wise to wear hearing protection to be sure.
The Bosch PSB 750 RCE has a weight of 1800 g.
To change the drill bit, locate and rotate the chuck sleeve counterclockwise until it loosens. Insert the desired drill bit firmly into the chuck and then turn the chuck sleeve clockwise to tighten it securely.
To adjust the drilling speed, first identify the speed selection dial located near the trigger. Turn the dial to the desired speed setting based on the material and drilling task. The higher the number, the faster the drilling speed.
The maximum drilling capacities for this drill machine are as follows: in wood, up to 40 millimeters (mm); in steel, up to 13 mm; and in masonry, up to 14 mm.
To activate the hammer drilling function, first ensure that the drill is switched off. Then, locate the mode selector switch and slide it to the hammer drilling symbol. This will enable the hammer action for drilling into masonry or concrete.
Yes, the Bosch PSB 750 RCE can be used for screwdriving tasks. To switch to screwdriving mode, simply rotate the collar behind the chuck to the symbol representing screwdriving. This will disengage the hammer and facilitate precise screwdriving without damaging the screw or surface.
Yes, the Bosch PSB 750 RCE has a keyless chuck. This means that users can easily and quickly change drill bits without the need for a key.
Yes, the Bosch PSB 750 RCE has a reverse function. This allows users to easily remove screws or back out drill bits when needed.
The maximum drilling diameter in concrete for the Bosch PSB 750 RCE is 14 mm. This is a decent size and should be suitable for most drilling needs in concrete.
The output power of the Bosch PSB 750 RCE is 400 W. This power rating indicates that it is a moderately powerful drill machine, suitable for various drilling tasks.
The sound power level of the Bosch PSB 750 RCE is 111 dB. This is a relatively high noise level, so it's important to use proper hearing protection when operating the drill.
Yes, the manual of the Bosch PSB 750 RCE is available in English .
Is your question not listed? Ask your question here
No results
Need help?
Do you have a question about the Bosch and is the answer not in the manual?
Question and answer
Number of questions: 5how to unlock the kelyess chuck. it is opened and stacked (can't rotate it to
I want a brochure for the PSB750RCE
What part for sanding
how do you unlock the chuck
Chuck siezed after atempt to release drill.